How does the power supply company pay attention to safety and how to ensure the safety of electricit

The scope of this question is too big.

Ways to ensure the safety of electricity:

1. Household appliances should be stopped immediately if they leak or short circuit: electrical appliances used in family life are easy to release leakage and short circuits, if this situation is found, it is necessary to stop using it immediately to ensure the safety of the family's electricity, and it should be a harmonious and safe living environment.

2. Unplug the electrical appliances after use: many families do not have the habit of unplugging, which causes hidden dangers to our safety, we need to check that the electrical plugs are not unplugged when we go out, and the high-power electrical appliances such as hair dryers and electric blankets must be unplugged.

3. Do not use electrical appliances with potential safety hazards: In life, there are some electrical appliances that are qualified, but the safety hazards are very large, such as those heated electrical appliances, even if they are used normally, they will be dangerous, so they need not to use these electrical appliances to ensure safety.

Common sense of electricity:

1. Know and understand the main power switch, and learn to turn off the main power supply in an emergency.

2. Do not use hands or conductive objects (such as wires, nails, pins and other metal products) to contact and test the inside of the power socket.

3. Do not touch the electrical appliances with wet hands, and do not wipe the electrical appliances with a wet cloth.

4. Unplug the electrical appliance after use; Do not pull the wire when plugging and unplugging the power plug to prevent electric shock caused by damage to the insulation layer of the wire; The insulating skin of the wire is peeling off, and the new wire should be replaced in time or wrapped with insulating tape.

5. If someone is found to be electrocuted, try to turn off the power supply in time; Or use dry wooden sticks and other objects to separate the electrocuted person from the electrified electrical appliances, and do not use your hands to directly save people; When young students encounter this situation, they should call for adults to help and do not deal with it themselves to prevent electric shock.

6. Do not disassemble and install power lines, sockets, plugs, etc. at will. Even simple things such as installing light bulbs should be turned off first and done under the guidance of parents.

First, check the circuit wires frequently, whether there is leakage, the second is not to turn off the power supply, turn off the switch in time after using electricity, the third is not to let children touch the power socket, and the fourth power supply is far away from open flames and water sources, so that the above can ensure the safety of electricity.

1.It is forbidden to move running household appliances such as fans, washing machines, televisions, etc. by hand.

2.It is forbidden to repair live wiring or equipment in the home with bare hands and feet.

3.It is forbidden to touch with wet hands or wipe lamps, switches and other electrical appliances with wet cloths.

4.It is forbidden to arbitrarily change the three-prong plug to a two-prong plug.

5.It is forbidden to pull and connect wires indiscriminately.

6.It is forbidden to add electrical appliances to the original line without permission.

7.It is forbidden to use substandard electrical equipment.

8.It is forbidden to use electric irons, hair dryers, electric stoves and other electrical appliances unattended.

9.It is forbidden to set up private power grids for fishing, anti-theft, hunting, etc.

10.It is forbidden to use lead wire, copper wire, etc. instead of a fuse wire. Wait a minute.

The following points need to be paid attention to in the safe use of electricity:

1. Do not repair or move live lines or equipment at home with bare hands and feet, such as table fans, washing machines, televisions, etc., to avoid electric shock;

2. Do not use metal to touch electricity, do not touch the power supply with wet hands, and do not use a wet cloth to wipe lamps, switches and other electrical appliances;

3. Install the three-pin socket correctly, and do not change the three-prong plug to a two-prong plug at will;

4. Use the power cord correctly, and do not pull or connect the wires indiscriminately;

5. Do not add electrical appliances to the original line without permission;

6. Correct use of household appliances, and shall not use electrical equipment that does not meet safety specifications;

7. Develop good habits, in the case of unattended or long-term non-use, please unplug the power supply of electric irons, hair dryers, electric stoves and other electrical appliances;

8. It is forbidden to use lead wire, copper wire and other substitute fuse wires as fuses;

9. Use leakage protector to prevent personal electric shock and electrical fire.

Electricity production must be built to improve people at all levels only.

The following points need to be paid attention to in the safe use of electricity:

1. Do not repair or move live lines or equipment at home with bare hands and feet, such as table fans, washing machines, televisions, etc., to avoid electric shock;

2. Do not use metal to touch electricity, do not touch the power supply with wet hands, and do not use a wet cloth to wipe lamps, switches and other electrical appliances;

3. Install the three-pin socket correctly, and do not change the three-prong plug to a two-prong plug at will;

4. Use the power cord correctly, and do not pull or connect the wires indiscriminately;

5. Do not add electrical appliances to the original line without permission;

6. Correct use of household appliances, and shall not use electrical equipment that does not meet safety specifications;

7. Develop good habits, in the case of unattended or long-term non-use, please unplug the power supply of electric irons, hair dryers, electric stoves and other electrical appliances;

8. It is forbidden to use lead wire, copper wire and other substitute fuse wires as fuses;

9. Use leakage protector to prevent personal electric shock and electrical fire.

Safety production is the focus and foundation of the management of electric power enterprises, the fundamental guarantee for the development of enterprises, and it is a cumulative and continuous process. Safety responsibility is heavier than Mount Tai, but in daily safety work, on-site actual operation, there are often some employees ignoring small links, simplifying work procedures, burying hidden dangers of accidents for safety production.

Most of the causes of accidents are caused by small mistakes, and many major accidents are due to the initial small mistakes, which are accumulated by small problems to become big problems, and finally lead to major accidents. For example, during construction, take off the safety helmet when the safety supervisor is not there; Failure to wear protective clothing as required; Fear of trouble and simplification of operating procedures; There are small hidden dangers that are not carefully investigated and handled, etc., these seemingly insignificant little things often happen around us, but we don't know that mistakes often occur in these details, becoming the bane of safety accidents, and once an accident occurs, it will bring irreparable losses to their own lives, enterprise development and national property.

A thousand miles of embankment, collapsed in an anthill", the details are destined to be safe. The slightest omission can lead to an electrical accident, and any fluke and opportunistic ideas are destined to pay a price. According to the information:

95% of human behavior is influenced by habits, and good habits are formed by the accumulation of subtleties in daily work. Therefore, in actual work, every employee should conscientiously learn the lessons of past accidents, overcome the sloppy and illegal work style, develop good working habits of prudence, patience and meticulousness, operate in strict accordance with the power regulations, and pay attention to every detail in the work. We must consciously abide by rules and disciplines and develop good work habits; Secondly, we must take the trouble to carefully arrange every work, grasp every small link, do a good job in every small link, so that there are rules to follow, violations must be investigated, in line with the "three do not harm" responsible for themselves, responsible for the development of the enterprise positive attitude, truly the safety work to the subtleties, and strive to do a good job in every small link in safety production, to eliminate loopholes in safety management.

It is necessary to strengthen the improvement of safety details, standardize daily operation behaviors, pay attention to the contempt and carelessness of details in ideology, as well as the simplification and omission of details in actual operation, pay attention to cultivating and paying attention to the small links of safety production, and develop good work habits.

The sea does not choose a trickle, so it can become big; The mountain does not reject the fine soil, so that it can be high. "The same is true for safety production, as long as each of us insists on starting from little by little, starting from the details, and uniting as one, we will definitely create a blue sky of power safety and harmony.

What do landlords need to know?

To talk about safety, first understand the safety regulations. To be honest, those regulations have cases, otherwise they wouldn't have been written.

Secondly, in the field, there are different responsibilities.

The most ordinary working class member, the important thing is self-protection.

Make sure all the safety measures on site are clear and check again before you work.

Be careful not to blindly follow, your own skills must be excellent, and you can see the danger points of the work.

The person in charge of the work is fully responsible for the safety risks that may exist on the site.

Personnel should be assigned to work taking into account the level of technical skills of each person, and risks can be avoided if the technology is good, and problems will almost always be there for the poor.

In general, there are two aspects: procedures allow you to avoid superficial risks; Technology can keep you away from hidden risks.

Improve safety awareness, self-protection skills, be familiar with safety regulations and various safety regulations, strengthen safety inspections, correct unsafe behaviors in a timely manner, and strictly inspect the two measures on the safety site, etc.!

Strictly follow the safety regulations, on-site standardization guidelines, two votes and three measures, etc.

In order to conscientiously implement the policy of "safety first, prevention first", standardize the safety management of power supply stations, improve the safety business quality of power supply station personnel, and reduce medium and low voltage accidents, according to the spirit requirements of the State Grid Corporation and provincial bureaus, municipal bureaus and county bureaus, combined with the actual situation of our own institute, I set up the "Rural Power Supply Station Safety Management Year" leading group activities, establish a complete safety management system, and actively operate, conscientiously carry out weekly team safety day activities, in the form of voice recordings, Focus on learning superior documents, safety regulations, accident reports, etc., carefully analyze the problems existing in safety production, formulate real preventive measures, strengthen the safety training of personnel in the institute, and combine safety parity work and spring and autumn inspection work to carry out detailed inspections of the township's high and low voltage lines, carry out special inspections after strong winds and heavy rains, find that accidents are eliminated in a timely manner, and strengthen the management of safety equipment, establish safety equipment files, warehousing accounts, safety equipment fixed storage, standardized use, Set up a special person to manage the periodic inspection, and conduct a visual inspection once a month. In order to do a good job in the publicity of rural electricity safety management, the power supply station adopts slogans, propaganda vehicles, board newspapers, TV plug-ins, etc. to publicize the common sense of safe electricity use to users. The institute has set up a special person to manage the users of the township's self-provided generators, installed anti-reverse switches, signed a dual-power supply agreement for safe electricity use, and the second power supply of dual-power users must have an anti-reversal device to prevent the first power supply of the power supply department from being inspected every month.

1. There must be an obvious disconnection point between the second power supply, and the user must notify the power supply station when using the second power supply to ensure safety. Strengthen the implementation of two votes, two sessions, and one card, the work issuer, the person in charge of the work, and the work permit person, participated in the "safety regulations" training organized by the Fumeng County Agricultural and Electric Power Bureau twice, so that everyone knows the importance of their shoulders, and the work issuer carefully checks the work ticket and whether there are any omissions in the safety measures on the site, before the operation, the person in charge of the work will hold a good pre-shift meeting, and read out the work ticket. work precautions, etc. At the after-shift meeting, the implementation of the work ticket for the day was carefully summarized, and those who violated the "safety regulations" were criticized and fined.