There is no network cable in the new community, and the broadband cannot be pressed, who can solve i

In fact, this matter is very complicated, the operator has to consider the cost, so the main line into the community basically has to be installed by dozens of owners before arranging the construction, but the owners do not agree on which operator to choose, so the number of operators is not willing to enter. The property is just counting the number of owners and contacting the operator. According to the law, water, electricity, gas, heating, network, and broadband are all franchises, and installation, maintenance, and repairs are not allowed to be involved in the property.

Therefore, the owner himself contacts a certain number of installation households and directly finds an operator, and then the operator finds the property to negotiate the construction site offline route, and also notifies the gas company and the power company to tap water in the community. Wait.

First of all, contact your property company, and then contact the broadband company that governs your community, and ask why there is no broadband, whether it cannot be installed or other reasons.

Then it is recommended to buy a mobile wifi, so that mobile phones and laptops can be used wirelessly, and solve the urgent need first.

No optical fiber coverage is not necessarily no network, it may be the operator's network cable coverage, it is recommended to go directly to the nearby operator business hall to consult, to confirm that the operators have not had time to lay the cables, then you can only wait for the operator to apply after the construction, in this process you can apply for a wireless network card, through the flow to access the Internet, now each operator has some large traffic network card, enough to use the Internet.

If you need to handle telecom broadband, you need to use the broadband line coverage of telecommunications, if there is no optical fiber line, there is a ** line can also be handled, but the supported bandwidth is limited. The same is true for China Unicom and Mobile.

Call Netcom customer service to apply for broadband, they install according to the process, if there is no condition to install them outside the line inspection in your community, they will return to the customer service, and the customer service will tell you that you can't install it, at this time you will not do it, and ask for a reply about the approximate installation time. Three days and two calls to urge them, urging them to their annoying position.

A: First of all, for this question, we want to make sure that it is a physical failure or a non-physical failure. Let's break it down one by one.

Physical faults, check if your network cable is broken, or if the code is folded somewhere, or because the network cable is too long and the signal is too weak. The check method is that we can connect the network cable to the computer, and see if there is an access prompt for the late and noisy computer. If there is, we will temporarily rule out the problem of the network cable, and then according to your problem prompt, it is likely to be a network cable problem, you can change a network cable to try;

Software glitches, check if yours is out of dateAs a rule of thumb, this is basically the case. In addition, you can also use the network diagnosis assistant to analyze in detail what is the problem.

Hope it helps

If other places can access the Internet, the lead ridge is just that you can't access the Internet in this room, it must be a problem with the line, and the line of the network cable panel is connected to the color classification of Huai Xin, and it can be loose.

Either it's broken, or the contact is bad, or the two ends are not connected, depending on what you use it for, and the reason why you refer to it can't be used.

What's the reason why my room's network cable can't be used stupid? In other words, can't you use your network cable? There are many reasons for this.

First of all, make sure that your network cable is good. Furthermore, the network cable is connected to a switch or router. And this switch or router file is confirmed to be easy to use, and it can access the Internet.

Secondly, Wang guess that your device is easy to use, and there is no problem with the network port. Check through these one by one.

In this case, you don't have to worry about it, just hit **, and give you the master who pretended to be Kuanno Shouxiang, and let him come to get it done. As for the reason, it may be that the network cable is disconnected, or it may be that the socket is wrong, or it may be a problem with your router settings. The specific situation will be known after investigation.

You can use a network tester to test the quality of the network cable and whether the color code of the network cable is correct.

If you don't have a network cable or broadband at home, you can find China Unicom, Mobile, Telecom and other operators to install it.

Take Unicom as an example:

1. Open any browser.

2. Then enter China Unicom Broadband in the browser.

<>4. After entering the homepage of China Unicom's official website, click Apply.

5. Then select "Wi-Fi Activation and Shutdown" in the processing options

6. Then click on Cheating to handle it immediately.

7. If you log in to your own, you can choose a third-party software to log in.

8. Select your city.

9. Select the broadband band file nuclear family width you want to handle.

10. Then click Buy Now.

11. Fill in the network access information.

12. Select the installation address.

13. If you want to do it, then click Next.

14. Then it will prompt that the appointment is successful, and you can wait for the operator to come to install.