What to do if the memory card won t be formatted

This is because the SD card is damaged, you can use the data recovery function, now more and more data needs to be saved, many people think that if the data is deleted by mistake and formatted, it will not be able to retrieve the lost data, and can only choose to give up retrieving, but in fact is this really the case? In fact, after the data is deleted and formatted by mistake, it may not be impossible to retrieve it by using a professional tool, and the specific operation steps are as follows:

Steps for SD Card Formatted Data Recovery:

Connect the SD card to the computer, and when the SD card is inserted, the computer will also display the corresponding storage device. In this way, it is necessary to ensure that the SD card can be displayed normally and the connection is stable.

2. Then we open the software and select the "Formatted Recovery" mode in the interface on the home page. Select the type of files we need to recover, such as ** and **, which are the files that are stored more on the SD card.

3. Select the location where the original file was lost, when selecting the original file, according to the file type, select the files we need to recover in turn, such as the jpg format in **, you can directly select the files that need to be recovered, double-click to preview, and click below to recover the lost files.

The above is the introduction of the data recovery process after the accidental deletion of the SD card, the overall recovery steps are relatively simple, you only need to connect the SD card to the computer first, and install the corresponding software, and follow the operation and prompts of the software to recover the lost data.

We recommend that you do the following:

1) Troubleshoot the memory card: right-click on the memory card letter, select the "Properties" item to open its properties panel, switch to the "Tools" tab, and click the "Check" button. The system automatically checks for errors and then fixes them.

2) If there is no important data in the memory card, it is recommended to perform a "low-level format" operation on the memory card directly: right-click the memory card letter, select the "Format" item from the pop-up menu, uncheck the "Quick Format" item, and click the "Start" button to format the memory card.

3) The most thorough solution is to mass-produce the memory card with a mass production tool to restore the factory settings.

Once the fix is ok, right-click to format it.

If your phone cannot format the SD card, we recommend that you:

1.Check if the phone already recognizes the SD card: Settings - (Battery & Storage) - Storage, see if the SD card storage capacity is displayed.

2.If the SD card is recognized, go to the above menu - click [SD card] - [Format] (or [Format SD card]). Note: Formatting the SD card will delete all the files in the card, please back up the important data in the SD card in advance.

3.If there is no response, turn off the SD card, reinsert it, and follow the above steps to do it again.

4.If it does not work, you are advised to try to replace it with another SD card to rule out whether it is an SD card.

5.If other SD cards can be formatted normally, it is recommended to try to format the SD card through the computer.

If your phone cannot format other SD cards, please bring your purchase receipt, repair card and device to a Samsung service center for inspection.

When encountering this problem that the memory card or USB flash drive cannot be formatted, it is basically a physical failure of the storage device and needs to be replaced. If you don't have important data on your card, just replace it with a new one. If the data is important, back it up and then replace it.

I think this is a black chip expansion disk,The previous ones are for non-expansion disks,Under the landlord**test,There are generally 3 situations of fake:1、mydisktest.The disk cannot be selected to detect 2. The test may be aborted or the disk will not be displayed on the computer after the test 3

The results of the test showed that it was a fake disk. Such a plate is very cheap, you can change it if you can, and throw it away if you can't change it!

You try to change the computer, if it can be formatted on another computer, it means that there is a problem with your computer's driver, if it still can't be formatted, I think it means that there is a problem with your memory card.

What to do if the memory card won't be formattedCommon reasons why SD card won't finish formatting:

1.Virus infection: SD cards are the most important data storage medium and are often used to transfer data.

The SD can be placed in a card reader and then connected to a computer to exchange or back up files. In addition, the SD card itself can be used in a variety of devices, such as mobile phones, digital cameras, etc. Used on a variety of devices, the risk of contracting viruses is much higher.

Some viruses can corrupt the data on the SD card or even the SD card itself, making the card inaccessible or unformatted.

The card has a bad block. Just like computer hard drives, SD cards can also have bad blocks. Bad blocks are areas that cannot be read and written normally, and formatting is written to the new file system, so formatting cannot be performed properly. There are many reasons for bad blocks, such as quality reasons.

Card Damage: The SD card has a small appearance and is easy to use and carry. It is easy to be damaged during daily use, such as water immersion and bumps. The physical fault causes the SD card chip to be damaged, and the reading and writing cannot be performed properly.

.By deleting the system file. There must be an unfamiliar file that cannot be deleted. Select this file, rename it (the first thing is to change the suffix txt, rar, ***, these can be), delete this unfamiliar file, everyone is trying to format it.

How big is your card, if it is a card above 4G, it is normal to be high-speed, if your card reader is relatively early, it may not be able to support high-speed cards, you can try to change the card reader. Or see if the yellow switch is turned off when the card is inserted into the reader.