How to install the network borrower router mobile phone

1. Enter the router address, connect the wireless router, and enter the address you see on the router in the browser, which is generally .

2. Enter the corresponding password, and after entering, you will see that you have entered the corresponding account and password.

3. Select the setting wizard, and then enter the operation interface, you will see a setting wizard on the left, and you will enter it (generally it will pop up automatically).

4. Enter the Internet mode setting and set the interface of the wizard.

5. Click Next, enter the Internet access method settings, we can see that there are three Internet access options, if your home is dial-up, then use PPPOE. Dynamic IP can be used by plugging the computer directly into the network, and there is a DHCP server on the upper layer. The static IP is generally a private line or something, or it may be a cell bandwidth, etc., and the upper layer does not have a DHCP server, or wants to fix the IP.

I chose PPPoE because I dialed.

6. Enter the password, choose PPPOE dial-up Internet access to fill in the Internet account and password, this should be understood by everyone, there will be an account number to open broadband, fill in it OK.

7. Set the password of the router, and then enter the wireless settings after the next step, we can see the channel, mode, security options, SSID, etc., generally SSID is a name, you can fill it in casually, and then the mode mostly uses 11BGNFor wireless security options, we need to choose WPA-PSK WPA2-PSK, which is so safe that it will not be hacked and rubbed by the network.

8. Click Done, the router will automatically restart, so be patient. The interface that appears after success.

9. How to connect the mobile phone to wifi is simpler, when the router is set up, click the menu key of the mobile phone, and then enter the mobile phone settings, the first item is wifi, and then set it to on, click to enter the wifi list, and select the wireless network name set in the router before. Enter the password you set earlier to connect.

I don't have a network cable at home, how to install a mobile phone with a network router.

The modem or home network cable is connected to the WAN port of the router, and the other computers are connected to the LAN port of the router.

The computer network card is changed to manually set the IP address, mask, gateway and DNS (the default IP range of the corresponding route, the last digit is 2 254 free arbitrary number,).

Enter the default IP address of the route in the browser to go to the route settings page.

Set the account and password for broadband Internet access as a router, set the Internet access mode as "PPPOE", and set the gateway and primary and secondary DNS domain name service names.

Turn on the wireless function and set the wireless key.

When the DHCP function is enabled, you can assign IP ranges, gateways, and primary and secondary DNS

DNS varies from service provider to region to region, so check the local broadband customer service or go online for specific parameters. ）

After this is set up, both computers and wireless devices can automatically obtain IP and surf the Internet.

If DHCP is not enabled in the router, the computer and wireless device need to manually set the IP address, mask, gateway, and DNS to access the Internet.

Even if DHCP is enabled for automatic IP assignment on the router, it is recommended that the computer manually set the relevant IP parameters, which will not only speed up the boot speed, but also speed up the connection to the network and stabilize the network quality.

The router must be plugged between the cat and the computer. If you want your mobile phone to use a router to access the Internet, first of all, the wireless router, and then the mobile phone must also support it. I don't know how to ask again.

You mean wifi bar. All you need is buy a wireless router, or a wired and wireless router. The manual will tell you how to set a password or something, it's very simple.

Here's how to set up a router on your phone:

1. First, connect the router and the broadband modem with a network cable, and the connection method is to connect the LAN port of the broadband modem with the WAN port of the router through the network cable.

2. After the hardware is connected, use the mobile phone to connect to the wireless signal of the router, then open the mobile phone browser, enter the login address and login password of the router, and select Quick Settings after logging in to the background.

3. Then fill in the broadband account number and password as required.

4. Then set the wireless name and password to save and then the router can be used normally.

Restore the router to factory settings first (the hole on the back of the router is slightly thicker than a toothpick, insert it with a thin skewer and hold it for more than 5 seconds, and wait for all the lights to flash, then it will be restored).

First, enter the router, (open the UC browser on the mobile phone, enter OK in the address bar, OK if not.) In the login box, fill in the username and password admin or guest. On the left is the menu, and there are submenus under those + signs. ）

In the settings interface of the router, find the IP setting option of the WAN port on the menu, there are static IP, dynamic IP, and PPPoE, select PPPoE dial-up, fill in the broadband account and password (password), there are "automatic connection", "on-demand connection", etc., select automatic connection, save.

Second, on the settings interface of the router, find the DHCP settings on the menu, select "Enable", and save.

3. In the settings interface of the router, find the settings of the wireless connection, select "Open", fill in the wireless password, and note:

Encryption method: wep WPA2 PSK

Password setting: more than 32 digits plus letters with mixed case and case. to prevent rubbing the net.

Fourth, find the channel (some are called frequency bands) on the menu of wireless settings, select 6, and save.

Don't move anywhere else.

Fifth, bring it up separately, and after saving the settings, please don't forget to click the "Restart Router" button.

Ways to install a router on your phone:

First, the phone needs to be on wifi and connected to the wireless router you want to set up

Open the user login page immediately, enter the correct account number and password, and touch "User login":

Let's select "Device Information" and scroll to the bottom of the page to see the detailed "Device Basic Information":

Let's select "Ethernet Interface Information" and scroll to the bottom of the page to see detailed network and client information

Let's select "WLAN Interface Information" and scroll to the bottom of the page to see the detailed wireless network configuration information that already exists

At the same time, according to our settings, we need the configuration information, continue to scroll to the bottom of the page, select the "Save Application" button, and save the configuration information

Then, select "User Management", scroll to the bottom of the page, you can change the account and password of the router background administrator in the "Access Control", and select "Save Application" after the setting is completed

One minute to show you how to install a router and set up a wireless router.

May I ask the master that router is the IP address?

Prepare your phone to set up a wireless router.

First, plug the router into the power supply, and then plug the broadband network cable into the WAN port of the router. If you have a broadband cable at home, you need to connect the broadband cable to the modem, and then connect it with the WAN port of the router with a network cable from another network card port of the cat. Set up a wireless router on your phone.

At present, some new models of relatively new ordinary wireless routers generally support the use of smartphones for settings, while smart routers basically support all of them.

Step 1: First open the wireless network settings in the mobile phone, if it is a new router, generally turn on the power, the router will automatically create an initialized wireless network, choose to connect directly, no need to care whether there is a network.