How to divide computer hard disk space, how to divide disk space How to divide disk space for comput

What should I do if I feel that my computer's hard disk is not evenly distributed, or that one of my hard drives is not enough? We can reallocate hard disk space to the computer, the following is to learn how to reallocate hard disk space, I hope it will be helpful to you

Methods for reallocating hard disk space.

Method steps.

Right-click [My Computer], select the [Manage] command, and open "Computer Management".

In the Computer Management window that opens, select the Storage and Disk Management items. In the right pane, you can see the partition status of the current hard disk.

That's when we can allocate space freely!

Take the distribution of G disk as an example:

Right-click [G disk] - [Compress Volume] and enter the size of the space to be allocated in the pop-up box. Then click Compress

Then right-click on the free space you just allocated and select New Simple Volume.

Well, the distribution is complete.

Symptom 1: After the device is turned on, the screen displays: device error

Or display: non-system disk or disk error, replace strike any key when ready

Explain that the hard disk cannot be booted, after booting with a floppy disk, type c:> after a:, and the screen displays:

invalid drive specification", the system ** does not recognize the hard disk. Fault analysis and handling: The cause of this fault is usually caused by the loss of disk setting parameters in CMOS or the wrong disk type setting.

Symptom 2: After the computer is turned on, the "wait" message stays for a long time, and finally the "HDD controller failure" appears. Fault analysis and treatment

The cause of this fault is usually poor contact or incorrect wiring of the hard disk cable interface.

Fault symptom 3:

After booting up, the screen displays: "invalid partition table", the hard disk cannot be booted, if it is booted from a floppy disk, it will be recognized as C disk. Fault analysis and treatment

The cause of this failure is usually an error in the partition table in the master boot record of the hard disk, and the above prompt will occur when multiple bootstrap partitions are specified (only one bootstrap partition can be specified) or when a virus occupies the partition table.

Symptom 4: After the self-test is completed after booting, it crashes or the screen displays: "No ROM Basic, System Halted" when booting from the hard disk.

Fault analysis and treatment

This is usually caused by a corrupted bootloader or virus, or the absence of a bootstrap flag in the partition table, or an override of the end flag 55aah. Boot from the floppy disk and execute the command "fdisk mbr". The fdisk contains the master bootloader** and the end flag 55aah, and the above command can be used to make the correct master bootloader and end flag in the fdisk overwrite the master bootloader on the hard disk, which is a quick and easy way to fix the damage to the master bootloader and the end flag 55aah.

If there is no bootstrap flag in the partition table, you can use NDD to quickly recover from the fault.

When it comes to partitions, sometimes it is also very necessary, one is that the computer you bought is generally one or two areas, and it is not enough to have more file categories; Second, if you buy a mobile hard drive, you will know that it is just a zone by default.

This is a bit uncomfortable for our friends who are used to partitioning and using storage space separately, after all, it is still difficult to find and distinguish documents when they are put together.

So today, I will tell my friends how to use the partition tool that comes with the computer to easily divide a storage space reasonably.

Start by finding Disk Management.

Click the right button in the lower left corner of the computer to quickly find "Disk Management".

Select Disk Management.

Then, find the corresponding storage disk in Disk Management and partition it.

Select the compressed volume.

Select it here, right-click it, then select "Compress Volume", and follow the prompts to complete the operation.

Next. At this point, the operation is basically a store, but the newly created partition will show an "unallocated" status.

If you want to use this state normally, you have to continue to select it, right-click, then select "New Volume", and follow the prompts to complete. (Here you can refer to the article I wrote earlier about the operation of merging partitions of USB flash drive, and the answer to creating a new volume with unallocated partitions).

Portable hard drives. Next, use File Explorer to rename the new volume according to the category you want to partition.

If you want to create several more partitions to store different types of files and documents, then you can follow the above process to partition them separately.

1. First of all, select Open This Computer, and pay attention to the management logo in this Computer.

2. After clicking Manage, in the Storage option, click Disk Management.

3. After clicking Disk Management, select any disk you want to split, and right-click to open the menu.

4. In the menu, click Compress Volume.

5. After completing the fourth step, enter the amount of compressed space and click compress.

6. After the compression is completed, find the allocated disk space is generally a black sign, without a disk symbol. We need to add disk symbols to the space, such as C disk, D disk, etc., in order to display it.

7. Click New Simple Volume, and then keep clicking Next to complete the setting.

8. Finally, when you return to this computer, you can see the newly added disk space.

1. Click My Computer, right-click and select Manage Items.

2. Open it and select Disk Management.

Item. 3. Next, select the disk you want to split. Right-click and select Compress Volume. (This step is used to make room for the divisible).

4. Enter the amount of space that needs to be freed up, and you can convert it. (1g=1024m) example: If you want to add a 10g disk, enter 10240 in the compression step. Click Compress.

5. After compression, you will find that there is an extra green disk, and this part of the space is the new disk area. Right-click New Simple Volume.

6. Follow the wizard program and install it step by step. Select the size, the name of the hard disk, and confirm whether it is formatted.

7. After the operation is done, you will find that a new disk has been added.

A method for detaching the computer from the memory space of the new disk.

1. First of all, in the following example, we can see that there are 6 disk spaces in my computer, and they are C drives.

D disk, E disk, F disk, H disk, I disk, of course, here I am my own newly separated H disk and I disk, how do I separate the beam line, the following is a detailed description of the steps for you.

2. First of all, right-click on "My Computer", select "Manage", and open it.

3. The following application form pops up, select Disk Management in this form, and click it.

4. After opening, there is a form as shown below, we can clearly see our disk management.

5. Then select a disk that you want to detach, here I choose'Yes D drive, then right slag friend click to select the compressed volume.

6. The following interface pops up, which means that the operation is correct, here we can see the amount of space you want to compress and the size you need to compress.

Here I assign it a 10000, and then click Next, and then we can see a disk space with a different color than the other disks, but it doesn't appear on it, don't worry, we're not done yet!

On this green disk, right-click, select New Compressed Volume, and then click Next, not far from success, still the next step, we can give our new disk, take a name, here I chose o, and then the next step, still our next step, to this step you can click on the end of the line.

Then our disk allocation is complete, after closing, turn on my computer, and you can see our newly separated disko!

Partition the computer disk and separate a D disk cavity beam and E disk. Here's how:

1.Right-click "Computer" on the desktop of the computer, find the "Manage" option in the drop-down menu bar and click to enter (as shown below).

2.Then the "Computer" management interface will pop up, find the "Storage" on the page and click to enter (as shown below):

3.Then find "Disk Management" under "Storage", and double-click to enter (as shown below):

4.After double-clicking to enter "Disk Management", you can see the current partition status of your computer (as shown below).

5.If the computer you just used only has C drive and D drive, you need to create a new simple volume and partition it, if you already have several partitions, we can merge the partitions. Select a compressed volume with a large disk space (as shown in the following figure).

6.Then in the compression dialog box, enter the size of the compressed search on the "Enter the amount of compressed space", and then click "Compress" to complete the operation (as shown in the following figure).

7.The available space will then be displayed in the disk list, if you need to merge the compressed volume into another magnetic flash drive, such as the C drive. Right-click on the C drive and select "Expand Volume" to execute the Expand Volume Wizard window, select the disk with free space, and then click "Next" (as shown below).

8.This will complete the operation of expanding the volume, and the hard disk partition under the win7 system will be successful (as shown below):

How do I repartition my computer's disk? The method of hard drive repartitioning is as follows: Segment refers to the state.

Right-click "My Computer" and select "Manage". Open the computer management interface and select "Disk Management". Select the partition to be deleted, right-click and select "Delete Volume", and select Yes when prompted by the system. Right-click a blank partition and select New Simple Volume. The wizard pops up, click "Next", and enter the size of the new partition. Assign a comma letter to the new partition and click "Next"; Set the Format Partition Parameters and select Next. When the setup is complete, click "Done".

The computer allocates disk space, which can be operated in the computer.

After the computer system is installed, if the silver hard disk is unevenly distributed, or if you want to reallocate the hard disk space, you can solve it through computer adjustment. First, start from the lower left foot of the computer desktop, go inside, find "computer", find the computer name, and then place the mouse on it.

Then right-click and select "Manage", and then the "Computer Management" dialog box will pop up. (The easiest way to find the Computer Management dialog is to place your mouse over "My Computer" on the top of your desk and right-click and select "Manage".)

How to allocate hard disk space to drive C:

There is not enough space on the C drive, and I want to transfer another disk back to the C drive. We have to reinstall the operating system, and when installing the disk operating system, there will be a misunderstanding of simplifying the disk, so we have to specify the size of the disk partition at one time.

Once the disk partition is determined, we must store files in this space when we use the computer normally, so we have to put the ** files and installed files to the D disk or E disk to ensure the size of the C disk space. <>