There are water marks on the screen of the mobile phone, how to get rid of it

If you are using a Huawei phone, we recommend that you do the following:

1. Please try to place your phone in a dry and ventilated place and use a paper towel to blot the water stains on the surface of your phone.

2. If the phone is turned on, press the power button to turn it off; If your phone is turned off, don't try to turn it on.

3. Please take out the SIM card and microSD card.

4. Take your phone to a Huawei customer service center as soon as possible to avoid unnecessary losses.

Precautions: 1. Do not move or shake the mobile phone frequently after entering the water, so as to avoid the spread of moisture inside the mobile phone.

2. Do not bake with a hair dryer or stove after entering the water, so as to avoid the liquid being blown into the inside of the mobile phone and damaging the mobile phone at high temperature.

3. Some mobile phones can be turned on and used normally after simple treatment, but the mobile phone is composed of precision electronic components, and there is a hidden risk after water ingress, so it is recommended not to try to turn it on.

4. During the after-sales maintenance process, data may be lost.

There is a watermark removal method on the phone screen:

1. Desiccant water absorption method.

In some of the goods purchased, there will be some small packets of desiccant, these are available, these small packets of desiccant are collected, and then the watermarked mobile phone is turned off and sealed with them, and the watermark can be removed after a few hours.

2. Heating drying method.

The electric heater in the household is turned on, and the state heats up to the point that the shell is slightly hot. Turn off the power of the mobile phone, place the screen of the handsail gas turbine down against the hot shell of the electric heater, and paste the watermarked part on the shell of the electric heater. After more than 10 minutes or so of raising the temperature, you can try to touch the phone screen, if it is already hot, wait for the temperature to drop, and the watermark disappears.

3. Hair dryer drying method.

The hair dryer is turned into a cold air to blow towards all the holes, and when it is done, put the phone in the desiccant container and put it.

4. Replace the base lighter.

There is a watermark on the screen, this is the water entering the inner screen of the screen, there is a layer called the base light behind the inner screen, if the water enters and causes corrosion, a white bright bar or watermark will appear, just replace the bottom light.

Water ingress but can be used normally is that the screen has a watermark, and the watermark will not disappear by itself.

Solution: The best way is to use ultrasonic cleaning, and you have to go to the factory store to do ultrasonic cleaning. Ordinary people don't have equipment, so they can only put it in a rice jar or tea box to wash it slowly.

That method has a certain effect, but the effect is not obvious, and it will not be able to open if you are not careful.

For many statements on the Internet, putting it in a rice tank or putting it in the sun to expose a lot of opinions are all laymen fooling laymen, but in fact, they have little effect, and they also delay the maintenance time.

This is the mobile phone, and water enters the inner screen of the screen. There will be nothing for a while, but if it is not cleaned up in time, the moisture will further corrode the LCD screen, which will cause a blurry screen or stripes, or even a black screen. If the moisture continues to enter the motherboard, it will also corrode the motherboard if it is not cleaned in time.

If there is a situation such as the touch screen not working, it is generally useless to clean up, so you can only change the screen. That's a lot more expensive.

If you are using a Huawei mobile phone, in order to reduce your losses, it is recommended to turn off your mobile phone and bring the relevant proof of purchase to a nearby Huawei customer service center for maintenance. You can check the service store.

Precautions after water and liquid ingress in the mobile phone:

1.Do not move or shake your phone frequently after water is ingress to avoid moisture spreading inside the phone.

2.Do not use a hair dryer or bake at high temperatures (including microwave heating) after water is in, to avoid liquid being blown into the phone and the heat damaging the phone.

3.Mobile phones are made of delicate electronic components, and there is a potential risk after water ingress, so please keep your phone turned off.

4.If you don't have a backup of your data, there may be a risk of data loss during repairs. After you go to the Huawei Customer Service Center, you can consult with a staff member to help you evaluate whether you can back up your data.

If the screen of your mobile phone is flooded, it is recommended that you do not turn it on and send it to a professional for repair as soon as possible.

We often see that the ** we like has a watermark, which makes many people very helpless and have to give up the ** they like.

2. After opening the Meitu App, go to the homepage, then click "Portrait Beauty" to start selecting the ** you want to remove the watermark.

3. Click on the "freckle and acne removal" below**, this was originally used for beauty but took it to remove the watermark, which is actually a bit overkill, but it is worth a try if it can solve the problem.

4. After the watermark is removed, click the " " in the lower right corner and finally click the " " in the upper right corner to save.