-
It represents the position of the rear wheels. The left mirror sees the rear of the car in the middle of the rear wheel cover (rear door grip, body crossline or mirror bottom line reflection) relative to the ground.
1. Approach the car from the left. Parallel to the yellow target parking space.
There should be a distance of about 1750px on the left side of the vehicle, and when you look out of the window and the driver's seat is on the extension of the outer wiring of the adjacent parking space (Figure Line L), it is time to stop.
2. After the vehicle is stopped, put the steering wheel.
Hit the left to the end, slowly retreat while ensuring safety, align the left sideline of the body with point A on the diagram, and then stop.
3. Return to the steering wheel in the stationary state of the vehicle, make the wheels swing right, reverse straight to the position of point A on the map under the condition of ensuring safety, you can use the door rearview mirror or directly check the road surface with your eyes, and stop when the center of the left rear wheel reaches point A.
4. Continue to drive the steering wheel to the left in the parking state, slowly reverse about 1250px and stop, then the center of the left rear wheel stops on the outer edge marked as "pivot steering area" in the figure.
5. Do one before and one out. In the parked state, turn the steering wheel to the right all the way and slowly move the car forward about 50-1750px, note the rear bumper.
Do not go beyond the n-line on the diagram, stop, turn the steering wheel to the left in the opposite direction, slowly pull the car back, and stop when the left rear wheel is on the periphery of the "pivot steering zone".
6. Finally, after the vehicle reaches the angle of being able to enter the parking space, reverse the vehicle into the parking space, if the vehicle position is biased to one side, there is no need to worry, move the steering wheel, and make the vehicle park in the middle of the parking space.
-
Look at the position of the left rearview mirror and the parking line, when the left rearview mirror is still a little distance from the parking line, it will be full to the left, and look at the position of the body and the left library corner through the left rearview mirror, ** whether the body will press the line.
After the left side of the steering wheel is killed, the car still maintains a backward movement, do not stop, pay attention to the left rearview mirror at the moment, when the nearest corner of the garage is seen from the rearview mirror, it is necessary to keep the distance between the car and the corner of the garage 30cm. This is a criterion for judging whether it can be stored correctly. If 30cm is just right, no other operations are required at this time, slowly reverse, until you see the sideline parallel to the body, return to the positive direction, and gradually reverse the warehouse into the bottom.
Precautions for inventory reloading.
Due to the different heights, the rearview mirror needs to be adjusted in time to avoid obstructing the view when looking directly behind you. Especially when driving someone else's or a unit bus, those who are used to reversing and look at the rearview mirror in the car must be adjusted, otherwise they can't see the back clearly.
Novices must control the speed when reversing, which is the premise of ensuring safety, otherwise too fast speed will increase the probability of accidents. Manual transmission cars also require a stable clutch, to step on the clutch steadily, to step on the clutch, and the heel to hit the ground, so that it is more stable.
-
The left side of course looks to the left, and the right side doesn't need to look at it.
-
Right inverted library. It is necessary to look at the right rearview mirror first, and then slowly look at the left mirror when the rear wheel enters the corner of the library.
When reversing into storage.
When it is recommended that the angle of the body and the garage is about 40 cm, then slowly reverse. Hit the steering wheel first.
Then look at the rearview mirror, the body is 30 cm away from the angle back to the steering wheel, you can't see the corner of the garage to kill the steering wheel, see the body and the garage line parallel to the steering wheel immediately back to the steering wheel.
-
Find the best angle for easy reversing into the garage, tips:
Gently lift the clutch to move the car backwards, control the speed, look at the left rearview mirror, and kill the steering wheel right when the right starting point sensing line appears in the left rearview mirror. Kill the steering wheel to the right, continue to move back, can not stop in the middle, while observing the right rearview mirror, to the rightmost line exposed, keep the body and the library angle distance 30cm;
Less than 30cm back half a circle steering wheel adjustment, greater than 30cm continue to kill the direction of the right, the body is still greater than 30cm, may be to see 1 o'clock when the steering wheel is slow, next time in advance or speed up the direction of the speed, continue to move back, when the right rearview mirror library side line and the body parallel (as shown in the figure), the steering wheel back to the right, correct the body, reverse the library into the bottom.
-
1. Gently lift the clutch to move the car back, control the speed, look at the left rearview mirror, and kill the steering wheel right when the right starting point induction line appears in the left rearview mirror. 2. Hit the steering wheel to the right, continue to move back, can not stop in the middle, and observe the right rearview mirror at the same time, until the rightmost line is exposed, keep the distance between the body and the library angle 30cm, (less than 30cm back half a circle steering wheel adjustment, greater than 30cm continue to kill the direction of the right, the body is still greater than 30cm, it may be that the steering wheel is slow to see 1 o'clock, and the next time the direction speed is advanced or accelerated). Continue to move back, when the right rearview mirror library edge line is parallel to the body (as shown in the figure), the steering wheel is back to the center, the body is corrected, and the library is reversed into the bottom.
-
There is a difference between the angle of view inside the car and the actual position outside the car.
-
Reversing into the garage, the right rearview mirror, the front door handle and the rear wheel are equivalent to the point where the driver determines the position. The details are as follows:
1. After the driver gets into the car, adjust the seat and rearview mirror, and fasten the seat belt, and then hang the car in reverse gear, release the parking brake lever, the car starts and reverses at idle speed, and the driver observes the garage through the right rear window.
2. When you see that the black edge of the right rear window is aligned with the right line of the garage, turn the steering wheel to the right at a constant speed to the limit position. Pailu.
3. After the car is put into storage, the driver looks back at the left side mirror, and when he sees the left side line of the entire garage, he immediately returns to the steering wheel to sell Xianbi.
4. Stop immediately when you see the left door handle and the bottom line of the garage from the left side mirror.
-
In order to reduce the occurrence of similar situations, the following is a detailed introduction to the rearview mirror method and the reversing skills.
What to do if you don't know how to look at the rearview mirror when reversing into the warehouse
1. Adjust the rearview mirror correctly.
Left rearview mirror. After that, the sight mirror is close to us, and when adjusting the upper and lower angles, we can make the heaven and the earth occupy half; In order to understand the road conditions on the side of the car as much as possible, more space should be left for the road, and all the left and right adjustments should be made so that the body occupies the mirror image 1 4.
Right rearview mirror. This mirror image is far away from us, and more road information is needed, so the adjustment principle is: in the upper and lower angle adjustment, the sky accounts for 1 4, and in the left and right angle adjustment, the body also accounts for 1 4.
Second, the reversing of the warehouse highlights (take the right reversing as an example).
1. Chase the line meter before reversing, and then stop hanging into reverse gear, when the lower edge of the left rearview mirror coincides with the stop line, you can continue to reverse in the direction of the right kill.
2. Observe the distance between the rear wheel of the right rearview mirror and the corner of the library, when the mirror has a width of 2 fingers, you can go back to the direction of a circle to continue reversing.
3. Observe whether the body is parallel to the library line through the left and right rearview mirrors, and can return to the positive direction when it is about to be parallel.
4. Finally, when the lower edge of the left rearview mirror is parallel to the port line, you can step on the brake and clutch to stop.
Precautions for reversing and warehousing
1. The distance between the body (tire) and the storage angle of 30cm is the key point, more than 30cm will be killed, and if it is small, it will be returned. If it's too narrow, you can go back to the right before repairing the car. In the process of reversing, it is necessary to be stable and slower so that there will be time to make adjustments to the car.
2. It's not too late to kill as soon as possible, and you can go back if you kill early, but if you kill late, you can't do anything.
-
It is usually best adjusted to see the rear of the car or even the back corner of the garage.
The left mirror is also adjusted in this way, but the body can be more quietly good to occupy a little, the rear door handle is on the upper edge of the mirror, and the left rear wheel can be seen outside the window Huiyan, which is convenient for the observation of left parking and side parking.
According to the needs of the rear direction of travel:
Turn the steering wheel with your left hand: Turn the steering wheel to the right if the rear of the car needs to travel behind right. Otherwise, turn the steering wheel to the left. In fact, this is the same as the steering operation when the car is driving forward, so you will not miss the wrong direction and get scrambling when you keep this in mind.
Reversing warehousing operation skills:
1. Control the driving speed and idle with 1 gear or reverse gear throughout the whole process, and drive at what speed you start. >>>More
C photos are very simple. Cross the unilateral bridge, you first have to find a good point on the body (because you can't see the tires when driving), use this point to aim at the bridge deck of the single-sided bridge, when you get on the bridge, the car must be crooked, don't be nervous, as long as you start to get right, you don't need to move the direction to pass! Turn at a right angle, turn left, try to let the right front tire of the car lean against the right side line without going out of the line, when you reach the turn out, don't rush to kill the direction, slow to halfway, in the cab of the car is half of the direction to kill, it's OK, remember to correct the direction quickly after passing, otherwise you will have to go out of the line. >>>More
The so-called point is the point where you use a certain point as your visual reference to perform a specific action in the process of reversing into the warehouse. Whether it is the right or left storage, the most important points are two, that is, the point where you kill the steering wheel to the right (left) when the storage is reversed, and the parking point where the brakes are stepped on when the storage is almost completed. Now let's talk about the point of the right inverted library. >>>More
Subject 2 when reversing, you can judge whether the body is back to the right by observing the rearview mirror, as long as the rearview mirror of the vehicle shows the rearview mark parallel to the body, the vehicle belongs to the back to the right state. After the car is put into storage, the driver looks back at the left side mirror, and when he sees the left side line of the entire garage appears, he immediately returns to the steering wheel, and stops immediately when he sees the left door handle and the bottom line of the garage from the left side mirror. >>>More
Inverted library preparation: the vehicle is parallel to the bottom line (the front wheel is positive, you can see whether the steering wheel and the left front wheel are positive) inverted left library 1, hang the reverse gear, release the handbrake, the clutch is slowly raised to semi-linkage, stabilize the clutch after starting, adjust the speed, and reverse backwards slowly; Turn back to the right rear to observe the right rear door triangle window, when the front center bar reaches the front of the triangle window, quickly hit the direction to the right (pay attention to keep the speed of the car at the slowest speed when hitting the direction). >>>More