How to use the eyewash, the correct way to use the eyewash

Choosing an eyewash product suitable for the use of their own factory is the primary priority for the factory to provide the correct safety protection equipment for the on-site workers. At the same time, the quality of eyewash products is uneven, which also brings certain difficulties to customers to choose eyewash products.

Eyewashes. Proper use:

1. Before use, the water inlet control valve should be opened.

2. Open the dust cover (if there is no dust cover, this step can be omitted).

3. Gently push the eyewash switch push plate in a clockwise direction (if it is equipped with an eyewash pedal, you can press the pedal).

4. After the switch is opened, the eyewash valve is opened, and the eyes can be flushed when they come forward.

After the eyewash is used, the order of closure is as follows:

1. Close the water inlet control valve (if there are always people in the work area, it is recommended to open the water inlet control valve all the time, if no one is working, it is recommended to close, especially in winter, etc.).

2. Wait for more than 15 seconds, then push back the push plate in the counterclockwise direction, and close the eyewash valve (wait for more than 15 seconds to let the water in the eyewash pipe drain away).

3. Reset the dust cover.

Precautions for using eyewashes:

1. When rinsing other parts of the body, pull the rod to the valve with your hands, and the water will be removed from the sprinkler head.

Automatic ejection, after use, the lever must be reset upward.

2. The eyewash device is used in emergency situations to temporarily slow down the harm of harmful substances to the body, and further treatment needs to follow the guidance of the doctor.

The use of the eyewash device and precautions are as follows:

Before using the eyewash, the water inlet control valve should be opened. In the event of an emergency, be sure to follow the steps below.

3. After the switch is opened, the eyewash valve is opened, and the eyes can be used as an eyewash for emergency treatment.

After the eyewash is used, the order of closure is as follows:

1. Close the water inlet control valve. (If the work area is occupied all the time, it is recommended to open the water inlet control valve all the time, and if no one is working, it is recommended to close, especially in winter, etc.) ）

2. Wait for more than 15 seconds, then push back the push plate in a counterclockwise direction, and the eyewash valve is closed. (Wait more than 15 seconds to drain the water in the eyewash tubing).

3. Reset the dust cover.

Precautions for eyewashes.

1.When you need to rinse other parts of your body, pull down the lever of the rinsing hand valve with your hand, and the water will automatically spray out from the shower head, and the lever must be reset upwards after use.

2.Eyewash devices are used in emergency situations to temporarily slow down the harm of toxic substances to the body, and for further treatment**, it is necessary to follow the doctor's arrangement and guidance.

3.When the eyewash is used, as long as you gently push the eyewash valve with your hand, the cleaning water will automatically spray out from the eyewash nozzle, and the hand-push valve must be reset and the dust cover must be reset after use.

4.It is recommended that the eyewash and shower equipment be activated at least once a week to see if they are working properly.

5.It is necessary to carry out an annual inspection of the eyewash and shower equipment once a year to see if the equipment is in good condition.

An eyewash is a device used to wash the eyes and is often used in the workplace or laboratory. The following steps need to be followed to use an eyewash:1

First, make sure that the container of the eyewash is filled with eyewash solution. Eye wash should be clean, sterile, and specifically designed for eye washing. 2.

When the eye is splashed with harmful substances, quickly aim the applicator tip at the eye, keeping a distance of about 10 cm. 3.Close the injured eye tightly and release the eyewash solution by gently pressing the applicator button on the eyewash with your fingers.

At the same time, keep your eyes open naturally and let the eyewash flow into your eyes. 4.When rinsing your eyes with an eyewash, you need to tilt your head forward so that the eyewash liquid flows naturally down to avoid splashing into the other eye or other parts.

5.Rinsing your eyes with an eyewash should last at least 15 minutes to ensure that harmful substances are thoroughly rinsed out. 6.

During the rinsing process, the lower eyelid can be gently pressed with your fingers to help the eyewash adequately cover the entire surface of the eyeball. 7.After using an eyewash, you should seek medical help immediately, even if the symptoms are relieved.

The correct way to use an eyewash is the eyeball immersion method.

When using eye wash to wash your eyes, you need to pour the eye wash into a silicone cup of about 5ml, tilt your head and start to open your eyes, blink and close your eyes, so that the eye wash can soak your eyes. You can discard the eyewash and use the same method to clean the other eye. Eyewash has different brands, different brands have slight differences in effect and effect, and generally produce different effects, please ask the doctor when using and buying, what are the different effects of different types, to avoid negative effects on the body.

After the package is opened, it needs to be used within a month, and the effect is better when using the eyewash after removing makeup or cleansing. Don't close your eyes, that's eyelid washing. After washing one eye, it is necessary to refill the other eye with a new eye wash solution.

After each use, please wash the eyewash cup with water and let it dry naturally.

Shelf life of eye wash

Eyewash solutions usually have a longer shelf life, usually one to two years. However, the "freshness period" of the eyewash after opening is only 4 weeks. The expiration date on the packaging of eye drops usually refers to the time when it is unopened, and once it has been opened, it should be discarded immediately if it has not been used up within 4 weeks.

After the eye wash is opened, the storage environment changes, and the efficacy of the drug gradually decreases.

Because the eyewash is a liquid drug, the stability is relatively poor, after opening the cap, due to the contact with the air, it is easy to undergo physical and chemical changes, resulting in the failure of the eyewash, and even due to the decomposition of the drug ingredients, harmful substances will be produced, causing harm to the eyes. For more than 1 month, even if the appearance of the eye drops has not changed, it should be discarded and not used again, as it is easy to bring health risks after a long time.

The above content refers to the encyclopedia - the use of eyewash.