-
1.When the abnormal line moves with the picture.
1) It is recommended that you restart your mobile phone to try, if the phenomenon is still there, it may be the system, software application design, please feel free to use.
2) If you have turned on Developer Options or Developer Options, and turned on Pointer Position, the screen will display the current touch data, the screen will show fluorescent traces where your finger is swiped, and the blue cross line will appear where your finger touches the screen.
2.When the abnormal line does not move with the picture.
-
Huawei phones. If a vertical line appears on the screen, it may mean that your mobile phone has been dropped, and then there is a vertical line, if there is a problem with the screen, your touch is not good, it is possible to say that there is a problem with the outer screen, and it can be used, if the inner screen is broken, it is recommended that you basically can't touch it, or go to the after-sales repair shop to test and repair it.
It is recommended to go to that official store and see what exactly caused it.
-
It is recommended that you use the screenshot function of your phone to take a screenshot of the current interface, then view the screenshot**, and confirm whether the abnormal line in ** moves with the screen by swiping left and right or zooming**.
If you do not follow the screen changes, please back up your data in advance and bring your purchase voucher to a nearby Huawei customer service center for maintenance.
Follow the screen changes: To eliminate hardware problems, it is recommended that you restart your phone to try, if the phenomenon is still the same, it may be the system, software application design, please feel free to use.
If you have turned on Developer Options or Developer Options, and turned on Pointer Position, the screen will display the current touch data, the screen will appear fluorescent traces where your finger is swiped, and a blue cross line will appear where your finger touches the screen, as shown below
-
There are two possibilities for a hard bar to appear on the screen of Huawei phones:1It may be that the motherboard of the mobile phone has appeared.
2.It's the phone's display that's broken. This situation of Xinhuawei mobile phones can be repaired for free, so you can get a Huawei mobile phone repair service point to go to a free warranty, or get a free repair in the store where you bought the mobile phone.
-
If a vertical line appears on the screen of the Huawei phone, it means that there is a problem with the screen of the Huawei phone and it needs to be repaired.
-
A vertical line appears on the screen of the Huawei phone, which may be the inner screen of the phone is broken!
-
A vertical line appears on the screen of Huawei mobile phones, this may be due to the pressure of the mobile phone or the aging of the mobile phone screen, check it, whether this vertical line affects normal use, if it does not affect it, it will be used, if it affects the use, then the screen needs to be replaced.
-
If it doesn't affect the use, you can ignore it, and you're a screen failure as described.
-
It is possible that the screen is broken, or the contact is poor.
-
If a vertical line appears on the screen of Huawei mobile phones, it may be due to the following accessories:
1. LCD screen.
The mobile phone screen LCD screen is composed of an LCD screen panel, a light filter plate, and a backlight source. The liquid crystal liquid in the LCD panel is arranged on the LCD screen panel in the shape of "Tic-tac-toe", and the outside of the LCD screen is protected by the outer screen glass, but the LCD screen is very afraid of pressure from the front, such as accidentally sitting on a Huawei mobile phone, the LCD panel is damaged, and the liquid in the LCD screen is flowing out, which will cause the screen to appear, vertical straight lines or horizontal lines, if the amount of liquid outflow is relatively large, there will be a watermark effect.
2. Display the cables.
The display cable is a connection line between the LCD screen and the motherboard chipset inside the mobile phone, and the display cable is soldered, and poor contact will cause a straight line on the screen of the Apple mobile phone, and if the display cable is desoldered and disconnected, it will cause the mobile phone screen to be black. If the screen of a Huawei mobile phone is pressed, it will not cause the display cable to be soldered, only if the phone is dropped, it will cause the display cable to be soldered.
3. Display chip assembly.
The failure of the display chip component on the motherboard will not cause a straight line on the screen of the Huawei phone, but a black screen on the screen of the phone, so a straight line on the screen of the Huawei phone can rule out the problem of the motherboard display chip assembly.
4. There is a straight line conclusion on the screen of Huawei mobile phones.
Under normal circumstances, if the Huawei mobile phone has not been dismantled or repaired, there is a straight line on the mobile phone screen 80% of the possibility is the problem of the mobile phone screen LCD screen, because the mobile phone has not been disassembled and repaired, the Huawei mobile phone display cable is fixed very firmly when it is packaged, so there is only a 20% possibility that there will be a straight line on the mobile phone screen. But these two can not be judged by the naked eye by the appearance,You must disassemble the phone,Press and hold the cable to reinstall the cable first,If the straight line disappears on the screen, it means that it is a problem with the cable,Otherwise, it can be determined that it is a problem with the LCD screen。
-
On Huawei phones, when you operate the application on the screen, a vertical line will appear, as shown in the figure below. It is possible that the mobile phone has the [Pointer] switch turned on. The following describes how to turn off the [Pointer Switch] operation process of the mobile phone.
Select to open Settings on your phone, as shown in the following image. Go to the phone settings page, select to open [System and Updates], enter the system and update page as shown in the following figure, select to open [Developer Options], enter the developer options as shown in the following figure, and select to turn off the [Pointer] switch. Summary:
1. Open the [Settings] option on your phone; 2. On the phone settings page, select the [System and Update] option; 3. Enter the System and Updates page and select Open [Developer Options]. 4. On the developer options page, select Turn off the [Pointer Position] switch;
If not, it may be a problem with the phone system, back up the data and restore the factory settings. If it doesn't work yet, it's a screen problem, and the screen needs to be replaced.
-
Hello. A vertical line appears on the top of the screen of the Huawei phone, which means that the screen is malfunctioning. Don't figure it out on your own.
Don't do a factory reset. Personally, we recommend going to Huawei's official customer service center for screen detection. The official customer service has professional system software.
-
Indicates that the one on the screen where the line appears is damaged. In this case, there will be no repairs at the moment, and the screen can only be replaced or barely used. There is a bad spot on the screen, a dark spot is a leak, and a white spot is a blemish.
Only when there are too many or too large white spots, it is a quality problem, and the other two are generally man-made damage.
-
On your phone, find the service and turn on the tap screen detection, and the system will automatically detect the problem there in planning.
-
Reason: 1. The circuit of the mobile phone display screen is faulty, and the cable of the display screen is not in good contact.
2. The LCD screen of the mobile phone is broken, and the gap between the LCD screens will become larger after the LCD screen is squeezed, resulting in black lines.
3. The wiring of the source drive circuit of the mobile phone LCD is soldered, or the driver IC is damaged, or the IC peripheral circuit is damaged or soldered.
4. Trying to turn on or run the mobile phone after water enters the mobile phone will cause the screen color lines (red, blue, green) inside the mobile phone to burn out, resulting in a certain area that cannot be displayed, resulting in vertical lines.
5. The tail cable of the mobile phone display screen is broken or the battery that supplies power to the tail cable is broken, resulting in no power supply.
-
Answer: The sudden appearance of thin vertical lines on the mobile phone screen is usually caused by the failure of the mobile phone screen or cables, and in a few cases, the mobile phone software may also cause this phenomenon, so after the thin vertical line appears on the mobile phone screen, you can first restart the mobile phone; If the problem persists, open the phone Settings, pull down the phone screen, select System & Updates, tap Reset, select Factory Reset, and finally tap Reset Phone below to factory reset the phone. If it is a problem with the mobile phone screen, it is recommended to replace the original screen, because the original screen and the mobile phone have a higher fit.
Ask a thick line.
It's a bit burn-in. Question: Do you want to change the screen?
Ask a good question, thank you.
-
Hello. A vertical line appears on the top of the screen of a Huawei phone, indicating that the screen is faulty or that the screen needs to be repaired or replaced. Personal advice is not to figure it out on your own.
Don't do a factory reset. Go to the Huawei Customer Service Center to perform a comprehensive inspection and repair. The official customer service is both safe and secure.
-
Hello landlord, if a vertical line appears on the screen of the Huawei phone, it is recommended that you can switch different screens. See if there's still this vertical bar. If there is still something under the different screen, then it is recommended that you can shut down and restart it to see if it can be solved?
If the landlord passes the above operations, the mobile phone screen is still a vertical line, then in this case. It should not have much to do with your mobile phone system, in this case, it is often related to the wiring and screen failure of the mobile phone, whether the external screen of the mobile phone is caused by external forces, etc. It is necessary to go to the after-sales service for inspection and maintenance.
-
1. If the LCD panel is damaged, the liquid in the LCD screen will flow out, which will lead to a vertical straight line or a horizontal straight line on the screen, and if the amount of liquid outflow is relatively large, there will be a watermark effect.
2. The display cable is a connecting wire between the LCD screen and the motherboard chipset inside the mobile phone, and the display cable is soldered, and the poor contact will cause a straight line on the screen, and if the display cable is de-soldered and disconnected, it will cause the mobile phone screen to be black. If the mobile phone screen is pressed, it will not cause the display cable to be soldered, and only the phone will be dropped.
3. The failure of the display chip component on the motherboard will not cause a straight line on the mobile phone screen, but a black screen on the mobile phone screen.
-
A vertical line appeared on the screen of Huawei mobile phones, probably because the mobile phone screen was accidentally broken before, or because it accidentally collided with something else, so the vertical line on the mobile phone screen appeared when it was hit, and you can also take the mobile phone to Huawei's after-sales service office, and find the after-sales service personnel of Huawei mobile phones to check the specific reason, so it is best to let a professional check and repair it first.
-
Do you first switch the theme wallpaper and see if there is a change? If there is no change, then it is not a problem of theme and wallpaper, then at this time you have to consider whether your Huawei screen is broken? There is an error in the ribbon inside,There will be a vertical line,If it doesn't affect the use,You can use it again,If you think you can change it,Then you'd better take it to change the screen。
-
If there is a bright or dark line on the screen itself, it means that there is a problem with the screen, which will gradually become worse over time.
-
It may be that there is a problem with the screen, or there may be a problem with the system, it is best to take the phone to the repair shop to call the maintenance staff to help you take a look, and if you can repair it, repair it.
-
A lot of black lines appeared in the phone.
Question: How do you solve it?
So how to solve it?
-
That's when the screen is broken. A new screen needs to be replaced.
-
Hello. A vertical line appears on the screen of a Huawei brand phone. The description screen is malfunctioning.
Don't figure it out on your own. Don't force a factory reset. We recommend that you go to the Huawei Customer Service Center to check the screen and fix the fault.
The official customer service is both safe and secure. Some share. Hopefully it will be adopted.
-
A vertical line on the screen of the mobile phone may be caused by the mobile phone being stuck, restart the mobile phone and then check it, or it may be that the cable of the motherboard and the screen of the mobile phone is loose, and the mobile phone is taken to the repair center to be reconnected, or it may be that the screen is squeezed and damaged, and a screen of the same specification needs to be replaced.
-
The reasons why vertical lines may appear on the screen of Huawei phones are as follows:
1.The mobile phone screen is malfunctioning, and the LCD screen is damaged;
2.Loose cable of mobile phone malfunction;
Solution:1Replace the screen;
2.Replace the cable treatment;
Suggestion: For specific faults, you need to send the mobile phone to an after-sales or professional repair point for testing so that it can be repaired.
-
This situation is the bad sector of the screen that everyone usually mentions, which is generally caused by the violent vibration of the mobile phone and long-term high-temperature operation, and this damage is irreversible, basically unable to be repaired, such as the vertical wire does not affect the use, and at the same time do not particularly mind, there is no need to replace the screen, and it is no problem to continue to use it carefully.
-
This must be caused by a damaged screen, generally speaking, the screen of the O Line is damaged, and there will be a lot of vertical lines in the middle of the screen. There are purple, green, and white. In short, this means that the screen has been crushed and damaged.
-
If a vertical line appears on the mobile phone screen, the screen line is broken, usually the screen change assembly, that is, the inner and outer screens are changed together, such as the screen is a high-end screen (such as **five or six hundred yuan or more screen) can be replaced with a screen line, which does not affect the use of this use.
-
Hello, in this case, the screen is damaged, generally speaking, the inner screen is broken, but it does not affect the use, and there is nothing wrong with daily use. I hope you are satisfied with my answer! Hope to adopt! Thank you!
-
If there is a vertical line on the screen of the phone, it proves that the screen is damaged. But this situation does not affect the use, if the owner himself does not mind. Then you don't need to replace it, because it costs a lot of money to replace the screen.
-
If a vertical line appears on the screen of your mobile phone, it means that the display screen of your mobile phone is a little broken, and there are cracks in it to have such a vertical line, so you can take it back to the Huawei repair point to see.
Open the general in the settings first! Then slide your phone to the bottom, find the restore option and click on it. We can see that there are two options, try both "Reset All Settings" and "Erase All Content and Settings Options".
Sometimes the phone screen will be stuck, so we can't move it, and we can't press it? What should we do to solve this problem? >>>More
It is recommended to use the phone screenshot feature to take a screenshot of the current interface. >>>More
1. Develop good wearing habits, and remove jewelry before going to bed and bathing. Avoid wearing silver jewelry in hot springs and seawater areas, and avoid contact with chemical solutions to prevent chemical reactions that cause yellowing and blackening. >>>More
Faulty cables. Screen hardware issues.
1 It is generally caused by the mobile phone system, and this situation can be solved by factory reset, system update or flashing. >>>More