What should I pay attention to when installing heating in the community?

There are many things to pay attention to in the process of installing heating in the community, and there may be hidden dangers if you are negligent. For us, safety is the most important thing, and life is more precious than heaven.

If it is not installed, it may leak. Please be sure to pay attention to this problem and not underestimate it, if it is a water leak in your own home. If you don't get it right, it will damage your furniture, and if the furniture is soaked in water, it will still affect your mood, and you will be very unhappy, and secondly, it will destroy your money.

You have to spend money to buy new furniture. If the heating leaks, it will not only affect your own home, but also the neighbors of the whole building. If you don't notice a heating leak for a long time, your downstairs neighbor may be in trouble, and their house will slowly develop symptoms.

Freshly painted paint, freshly renovated house. If there is a stain, then what an unfortunate thing. <>

Another point is to pay attention to the quality of the heating. If your heating is too cheap when you buy it, they will be of poor quality. In the process of assembly and production, there will be corners, there are potential safety hazards, a section of heating temperature is high, the air pressure inside is large, then it is likely that the valve will be bullied out.

It's a dangerous thing to do, and even the heating will burst. These phenomena are not willing to be seen or accepted. For us, the heating explosion is more dangerous, and it is fortunate that it will not hurt people when no one is around, so if the heating bursts, it is just right, and children are playing next to it, it is difficult to imagine, and the consequences are unimaginable.

Of course, there are many things to pay attention to in the process of installing heating in the community, to check whether the heating is leaking, whether the quality of the heating is good, and whether the heating interface is good. Of course, it is more important that the heating does its job and is able to provide us with heat in the winter. If it doesn't heat up so much, it loses its most basic function.

We need to pay attention to these problems!

It's almost winter, and the heating should be installed soon, so what are the main concerns?

I'm going to talk about the heating in the house I lived in.

The first is that someone will come to count whether you want to install heating, and if you need it, you will need to pay a certain fee, which is paid according to the size of the house. Then the heating party will notify in advance that the radiator will be installed, so pay attention to the notice of the community, it may be a text message notification, or it may be posted on the door of the community, pay attention to check. At a moment's notice, you need to keep someone at home on the day they come to install the radiator.

If you don't keep people because of something, the workers will skip your house when installing radiators, and when the whole community is finished, they will come to make up for the few that are not installed. So if you don't keep people on that day, you're going to have to wait until the end. <>

After installing the radiator, you have to test the water, see if the radiator is installed tightly, whether it is leaking, test the water on this day at home anyway to keep people, my grandfather downstairs is not there that day, and then when testing the water, his grandfather's downstairs is flooded, not only need to lose money, but also to help people clean up, especially troublesome, for these worries, the family must keep people. When testing the water, pay attention to whether each radiator is leaking, and some may be dripping, so pay attention to observation. If there is a water leak, it is necessary to notify the person who tested the water in time, so that they can quickly repair it and minimize the loss of energy.

After testing the water, it will be heated in a few days, and when it is the most heated, you have to check whether the radiator is sufficient and whether it is leaking. If all these are fine, then you can survive the winter.

In winter, it is necessary to ventilate a house in West Lake, put a wet towel on the radiator at night, and humidify it. Drink plenty of water.

The weather is getting colder, and the heating season is about to begin. Various communities are busy collecting heating bills. Generally speaking, the heating should be officially in mid-November in the northern regions.

If the complex has already installed heating facilities, then the preparation is relatively simple. Mainly check and troubleshoot. First, check whether the pipe valves and radiators are seriously aged, and replace them in time if there are any; The second is to check whether there is water leakage and water seepage in the place where the pipe fittings are connected.

The third is to check whether the radiator and pipe are blocked. If the above is okay, you can ensure that the heating is normal.

If the district heating is the case of initial installation. Then, it is important to consider the material configuration and the layout of the radiator or the laying of the pipes.

The heating methods used in each community are different, some are water heating, some are air heating, and some are floor heating. In the case of air heating, the pipes and heating equipment need to withstand higher temperatures, and the thermal expansion and contraction of the material need to be considered. In the case of plumbing, the corrosion resistance of the material needs to be considered because of the water quality.

As far as the layout of radiators and the laying of pipes are concerned, because they directly affect the temperature of the room, the size and quantity of the installation are suitable and the distribution in each room should be relatively reasonable. Otherwise, the indoor temperature will be too high or too low, which will affect the heating effect.

After the installation of the new heating is completed, it is necessary to test the water and gas, the purpose is to find out whether there is a problem such as wrong direction of the inlet and outlet water, water leakage, blockage, etc., and the inspection should be meticulous, and the problems should be eliminated in time.

It is also important to note that many people are accustomed to putting clothes and towels on the radiator to dry. While there is nothing wrong with this, be careful not to let small children touch the radiator or remove items from it to avoid burns.

The current community is collectively heated, so the heating is also uniformly installed, whether it is the renovation of the heating or the installation of the new heating, it is uniform. So, it comes to saying something.

First of all, I think the most important thing to pay attention to when installing heating is safety, and the main thing is your personal safety and property safety. Because when the heating is installed in a unified manner, the largest amount of heating in the community is larger, and there are some strangers from outside, and some people will enter our homes for installation, at this time we need to pay attention to it, those real installers will naturally not have any problems, the problem lies in those who pretend to be bad people who are installers. They entered the compound on the pretext of installing heating, and then began to show their fox tails.

It would be fine if they were just stealing something, but if they were going to cause us physical harm, we couldn't afford that. So what we need to do is not to put anything valuable in the house during this period of time, and if we need to keep someone, let the man who is the head of the family stay at home, and never be a single woman.

In addition, I think it is best to leave one person in the house during the heating installation, because if something happens, it can be dealt with in a timely manner, for example, if the water suddenly runs out, which items can be rescued first. Another is to install heating in the community, you must pay attention to safety when you go out, see clearly what is in front of you and above your head, and prevent what falls and hurts yourself.

I don't think there's anything else to pay attention to when you notice this, and it's all right.

First of all, clean the area where you are going to install heating and keep the walls clean. Secondly, the radiator will be installed around the window, so that it has two functions, the first is that its heat rises, which can block the cold air from the outside room into the house to a certain extent, and the other is that it will occupy a relatively small space, and it will not be like other places to install it, there is a feeling of hindrance. <>

Because the radiator is installed close to the ground, because the heat will form a convection with the cold air in the city, and then the whole room is warm and comfortable, the heating is different from the heat generated by the air conditioner, and it will not be too dry. And it's also good to dry on the heating in winter and wear shoes and socks urgently.

Because there will be heat dissipation during the heating process, which may cause the wall to change color, so you can prepare the selection of wall wallpaper color before installation.

The second is to prepare some decorative materials, and after the heating is installed, make an appearance modification. The choice of materials, do not choose materials that do not dissipate heat. At the same time, it is easy to disassemble, because if the heating fails, the exterior decoration may be damaged. <>

In addition, when installing heating, some walls may be drilled holes, so clean the area around the wall where the heating duct is prepared as much as possible.

In addition, the heating cannot be moved after it is installed, so if it is a unified plan, you don't need to think too much, if you need to plan the place yourself, then you can choose some places that do not occupy space in advance.

In addition, after installation, if you want to move, you still have to find a special master to do it, so as not to cause water leakage or poor heating effect caused by unauthorized movement.

First of all, the most important thing is the style of heating, which is very important, you see what style you like.

Generally, there are many styles of radiators on the market now, so let's see what kind of radiator you like.

If it's a unified arrangement, forget it, and the layout of the heating is where you want to put the heating in your home.

This point not only needs to take into account the reasonable layout of the heating, but also needs to consider that the heating in your home is the warmest on the ** surface. Isn't heating just to keep your home warm?

In addition, the choice of accessories must go to a regular hardware store to buy, and save the time to rework when the time comes.

The last thing left is the suppression, and we know that after the heating is installed, it is the suppression that is needed.

If it's okay after pressing, then it's OK to use it normally.

If your community agrees to arrange, you don't have to worry about these things, of course, the quality is also said to be up, if you install it yourself, you have to consider the above factors, every point is crucial.

I envy the families who have heating in those communities, because now winter is slowly coming to us, as the weather gets colder day by day, we will wear very heavy clothes in our daily life, especially for families with children, and the air conditioner will be turned on quickly in winter.

So if there is heating at home, I think it is a very happy thing, but there are also disadvantages with heating, because people have to go through environmental changes throughout the year, if they are in a warm environment for a long time, then their body may not be able to stand the invasion of the outdoor cold.

In fact, my aunt told me that if there is heating, it is not a very good thing, because people wear very little when they are indoors, and then it is very cold when they go outside, so a cold and a hot will cause them to catch a cold, he said that in his winter, he often has a cold, because the indoor is too warm, and the outdoor is too cold.

In addition, my aunt also told me that because there is a radiator at home, it is actually very dangerous for children, because the child does not know, this thing can not be touched, if the child because of fun, put his hand on the radiator, it is actually very dangerous, because this may burn the child's little hands.

In fact, heating in the home, one of his environments is very dry, because, in winter, it is very dry, so if the home is still heating, it will keep your body and your face in a dry environment for a long time, and the air is extremely short of water, which is actually not a good thing for the human body.

Most homes install radiators to keep warm in winter. Some of them frequently leak water and the radiator is not hot during use, which not only causes harm to their own homes, but also harms their neighbors who go up and down the stairs. What's even more annoying is that some manufacturers do not have the corresponding after-sales service, and the user can only carry the problem by himself, and the loss is borne by himself, and even more, some manufacturers have long disappeared, so that people do not even have a place to vent.

So, what are the precautions for installing heating? Let's follow the golden flagship flag brother to find out.

In order to avoid the above situation, we have to choose a radiator suitable for our own use when installing, and pay more attention to some installation matters, so as to take precautions and prevent problems before they occur.

1. Understand the quality of heating water in advance.

Heating conditions are more complex, the heating water quality is different, the radiator suitable for use is different, if the oxygen content in the water quality is high, the home is not suitable for the installation of general steel radiators, but should use copper-aluminum composite or other radiators that have also done internal anti-corrosion treatment.

2. Try to choose products from well-known brands and large enterprises.

Radiator is a special building materials product, related to the future heating quality and family property safety, from the product quality and performance considerations should try to use domestic well-known brands and enterprise products. Moreover, the use of radiators is generally ten or twenty years, and the cost performance is quite high, so there is no need for consumers to buy miscellaneous or unbranded products in order to save a little money, and ignore the quality of the products.

3. Be sure to sign a contract when purchasing.

No matter how much the manufacturer promises, it is all verbal, and the interests of consumers cannot be guaranteed. When consumers buy, they must sign a sales contract, which states the responsibility that the manufacturer should bear, and in case of an accident, they can claim compensation by virtue of the contract. According to industry sources, it is best to choose those manufacturers who are insured in formal insurance companies, so that consumers can really buy with confidence.

Fourth, the installation accessories should be selected from the original parts.

When buying a brand of radiator products, it is best to choose its accessories at the same time to prevent the occurrence of mismatch during installation, and if you choose to install other brands, it is not easy to define the responsibility if there is a problem.

Fifth, you should choose a company with professional qualifications for installation.

Heating is a complete system, there is a certain technical content, most people do not have the corresponding technology and tools, easy to unreasonable design, improper operation of the situation, buried a lot of hidden dangers of accidents. Therefore, it is more appropriate for users to find a professional company or team with installation qualifications when installing, and they will send professionals to install and maintain.