I dismantled the air conditioner and took it home. Too impatient to pretend?

This situation depends on the specific situation, I think there will be no problem at all if you explain this matter clearly to your family, and it will not affect your situation, so it is completely fine to discuss it with him.

You dismantle the air conditioner and take it home, don't pretend if you're too impatient, if you really don't want to help, then tell the truth! But this kind of small favor is nothing if you have time to help.

In this case, there is no need to pretend, and it is okay to pretend otherwise, and it is no problem not to bring such bad feelings home.

Hello, the air conditioner is hot now, so people are back at home, you can install it at home, and you can use it at home.

Hehe, how can young people do it if they don't work hard, and it is impossible to succeed if you give up.

In this case, I think there is still a problem, you should file a complaint, and if you guess the air conditioner is taken home, this situation should be a little problematic.

People walk in society, many of them have to follow certain rules, and many things can not be done according to their own temperament.

You can go and ask those teachers, some teachers are very good, he will give you the first meaning or joining, how do you pretend?

You dismantle someone's air conditioner, why take someone else's air conditioner home? If your skills are not strong, don't try it casually, otherwise the owner will make you lose money.

1. Turn on your air conditioner and refrigerate it.

2. Collect fluorine, then close the high-pressure valve of the external machine with an Allen wrench, and close the low-pressure pipe valve after about 1-2 minutes.

3. Dismantle the pipeline, and use a movable wrench to unscrew the copper nuts of the high and low pressure pipes.

4. Disassemble the cable connecting the inner and outer machine, disassemble the plastic cover plate of the external unit, the cable binding post can be seen, loosen the screw with a screwdriver, and remove the cable.

5. Take off the internal machine, dismantle the internal hanging board on the wall, disassemble the external machine, unscrew the 4 anchor screws of the external machine, and remove the external machine bracket.

The key to disassembling and assembling the air conditioner is to collect fluoride, as long as you follow the steps to solve it yourself.

Procedure. 1: Set the remote control to cooling mode to turn on the air conditioner.

2: Check whether the indoor unit is running normally.

3: Whether the outdoor compressor starts normally.

Dismantle the air conditioner to collect fluoride.

Fluoride collection in the refrigerated state:

1. Close the high-pressure valve tightly. "That is, the thin pipe".

2. After the isopress works for a few more minutes for 1-2 minutes. Then close the valve of the low-pressure pipe "thick pipe" tightly.

3. Then turn off the machine and disassemble the pipes and wires.

4. Disassemble the machine.

After the machine is moved, put the fluorine out.

1. Connect two copper pipes, the small one is a high-pressure pipe, the joint is tightened first 2, the large one is a low-pressure pipe, and the connection is tightened and loosened a little, because the air needs to be exhausted 3. Next, open the valve on the high-pressure pipe, and hear that there is gas discharged from the interface where the high-pressure pipe is not tightened.

4. When you feel all the air in the tube when you feel all the air in the tube being discharged with your hands, tighten the joint nut on the low-pressure tube (about 5 seconds) until there is no gas leakage.

5. Check whether there is any leakage in the interface.

6. Open all the valves on the high-pressure pipe and the low-pressure pipe.

7. Start up and run.

Note: The air must be drained cleanly, otherwise there will be a malfunction. )

How do you remove an air conditioner? Steps to remove the air conditioner.

There are too many parts in the air conditioner, so please ask a professional to disassemble it safely, and don't try it yourself.

Close the outlet valve. Turn on the air conditioner for 10 minutes, close the intake valve, and you can remove it.

1. If you are very clear about the process of installing air conditioners, you can disassemble and assemble them yourself. Before disassembly, the first thing to talk about is to do the work of collecting fluoride, close the high-pressure valve, and then close the low-pressure valve. Unplug the power supply, and talk a lot about unplugging the wiring of the four-way valve, and start to collect fluoride.

2. Next, you need to disassemble the connector of the outdoor unit, which is connected by copper pipes, and remember to remove the wire connector of the outdoor unit. 3. Then remove the outdoor unit, for residents living in high-rise buildings, disassembling the outdoor unit is a high-altitude operation, so be sure to take safety measures and wear a safety belt. The whole dismantling process must ensure safety, and for some high-altitude work, if you do not have safety measures, it is best to have professional personnel come to disassemble.

No, before disassembling the air conditioner, you need to collect the refrigerant into the outdoor unit, then remove the indoor and outdoor unit connection pipes, use a wrench to unscrew the fixing screws of the indoor unit and the outdoor unit respectively, and remove the indoor unit and the outdoor unit.

Step Method.

Before disassembling the air conditioner, the refrigerant in the air conditioner should be collected into the outdoor unit.

First, bury the air conditioner in the refrigeration state and turn it on. Open the brass hexagonal bonnet of the high-pressure valve on the outdoor unit, and close the high-pressure valve with an inner hexagon wrench. At this time, the air conditioner is still running, because the high-pressure valve has been closed, so the refrigerant can no longer flow to the indoor unit through the high-pressure valve for heat exchange, and is compressed into the outdoor unit.

When the air conditioner runs for about 3-5 minutes and there is no more cold air blowing out of the indoor unit, it means that the refrigerant has been fully received into the outdoor unit. At this time, close the low-pressure three-way valve on the outdoor unit. At this point, the refrigerant is enclosed in the outdoor unit.

Turn the air conditioner off.

At this time, the disassembly operation can be carried out, the connection pipe of the indoor and outdoor machine can be removed, and the cable between the indoor and outdoor machine can be removed; Pay attention to cleaning when removing the copper pipe of Unicom, and seal the interface of the pipe mouth and the tee valve with a plastic bag to avoid the entry of dust and impurities.

When disassembling the indoor unit of the air conditioner, you can use a wrench to unscrew the lock nut of the air conditioner connection, and at the same time use the prepared sealing sodium screw to protect the joint silk pattern.

When disassembling the outdoor unit, use a wrench to remove the lock nut of the outdoor unit, and then use sodium screws to protect the connection joint silk pattern; Then use a wrench to unscrew the soles of the external machine, because the outdoor machine bending stool is heavier, and sufficient protection measures should be taken when dismantling.

Finally, straighten the connecting pipe of the outdoor unit, and seal the port of the connecting pipe at the same time to prevent dust from entering.

If you are not a professional, disassembling the air conditioner yourself may result in damage to the air conditioner or a safety accident. To eliminate the situation are some of the conditions that can cause damage to the air conditioner

1.Improper operation:If it is not operated properly when disassembling the air conditioner, it may cause damage to the internal parts of the air conditioner or destroy the air conditioner shell, affecting the service life of the air conditioner.

2.Missing parts:When disassembling the air conditioner, if you are not careful to lose some parts or components, it may cause the air conditioner to not work properly or have a safety hazard.

3.Incomplete disassembly:If the air conditioner is not disassembled cleanly when disassembling it, it may affect the subsequent installation and use, and may even cause damage to the air conditioner.

4.Electrical Safety Issues:The electrical part of the air conditioner is more complicated, and if the air conditioner is not disassembled according to the correct procedure, it may lead to electrical safety problems and may even cause safety accidents such as fire.

Therefore,It is recommended not to disassemble the aircon yourself, it is best to seek a professional aircon repairer for disassembly and installation. If you really need to disassemble the air conditioner, it is recommended to understand the structure and disassembly steps of the air conditioner before dismantling, pay attention to the safety of operation, and be cautious during the disassembly process to avoid unnecessary losses and potential safety hazards.

It is not difficult to disassemble and assemble the air conditioner. The key is to collect fluoride, and you must follow the steps. The air conditioner is filled with "Freon."

A liquid formed by high-pressure compression of alkane gas, which absorbs a large amount of heat when volatilized and releases a large amount of heat when compressed. After the freon leaks, the air conditioner is no longer usable.

Set the remote control to refrigeration mode to turn on the air conditioner. Dismantle the air conditioner to collect fluoride.

Fluoride collection in the refrigerated state:After collecting fluoride, it can be disassembled.

After the machine is moved, put the fluorine out and connect two copper pipes, the small one is a high-pressure pipe, the joint is tightened first, the large one is a low-pressure pipe, and the connection is tightened and loosened a little, because the air needs to be exhausted and then open the valve on the high-pressure pipe.

When you hear that gas is coming out of the untightened connection of the high-pressure pipe, feel the coolness of the exhausted gas with your hands, and feel all the air in the pipe inside, tighten the joint nut on the low-pressure pipe (about 5 seconds).

until there is no gas leakage.

Check whether there is any leakage in the interface, open all the valves on the high-pressure pipe and low-pressure pipe, and start the operation.

Unless you have learned the relevant technology of repairing the air conditioner, it is not recommended to dismantle it yourself, one is to avoid the potential danger caused by unprofessionalism, and the other is to dismantle it yourself if there is a fault, and if you can't repair it yourself, you may need to pay extra money to repair.

No, it doesn't. The removal and installation of air conditioners require certain professional skills and tools. For example, fluoride should be collected before disassembly, especially in winter, and the air conditioner needs to be in a refrigeration state.

It is advisable to let a professional do it.

It can be dismantled but it is not professional, especially to dismantle the outdoor unit, you also need a safety rope, the outdoor unit itself is also quite heavy, no helper can not be dismantled by a person, it is recommended to find a professional to dismantle it, this money is not good!

The air conditioner can't be removed by yourself, because you don't understand the principles of these, you need to find a professional maintenance.

If you know how to install air conditioners, you can dismantle, if not, it is better to ask professionals to help remove them, because you don't understand, it is easy to break the air conditioner when you remove it, and it is easy to leak fluorine, and finally you have to ask professionals to add fluoride.

Can an air conditioner be removed on its own? If you are more professional, the air conditioner can be removed by yourself. But when it comes to installation, you have to find a professional to install the air conditioner.

Can your mother's air conditioner be removed by herself, if the air conditioner is not successful, you can remove it yourself, if the air conditioner is high, you have to find a professional to dismantle it.

If you are professional enough, you can disassemble it yourself, otherwise it will cause fluorine leakage, in which case you will have to re-fluoride for you.

Can an air conditioner be removed on its own? Oh this I personally think that if you can dismantle the air conditioner, you will also install it, then it should be no problem, if you don't understand it at all, then it is recommended that you ask a professional to remove it, it doesn't take much money, after all, it is safety first.

This depends on personal ability, it is recommended to find a professional to help dismantle, it is guaranteed and safe.

Dismantling an air conditioner requires a certain amount of professional skills. It is very easy to remove it simply, you have to remove it and be able to install it, and do not add refrigerant, you need professional personnel to operate.

The air conditioner is not willing to be removed by yourself, because you are not a professional person, you will not, it is easy to break the air conditioner parts, so it is still suppressed to ask a professional to do it.

If you don't want it, you can disassemble it yourself, and if you want to reinstall it, you still have to find an installer.

It is best to call it a professional demolition, freon is easy to run away.

It is not recommended to disassemble the air conditioner by yourself because it involves electrical components and there is a danger of electric shock and injury to the human body. In addition, air conditioners also contain compression refrigerant, which can cause pollution to the environment if not operated correctly. If you need to repair, clean or replace your air conditioner, it is best to contact a professional service person to operate it to ensure that the operation process is safe and reliable.

If you must disassemble the air conditioner by yourself, you should carefully read the instructions of the air conditioner on the premise of ensuring safety, and prepare the tools that need to be used and installed, and you also need to pay attention to the following points:

1.Power off: Before disassembling the air conditioner, you need to confirm that the power supply has been powered off and unplug it to ensure safety.

2.Freon gas: The air conditioner stores the compressed refrigerant Freon gas, which is a harmful gas that can damage human health, so you should pay attention to the handling of Freon gas when disassembling the air conditioner to avoid damage to the body.

3.Tool preparation: Specific tools are required to disassemble the air conditioner, and these tools need to be prepared to ensure the smooth disassembly process.

It should be noted that if you are not familiar with the construction and operation process of the air conditioner, it is recommended not to disassemble it by yourself, so as not to cause electrical failure or possible safety accidents. It is best to have a professional service person or experienced person take care of the installation and disassembly.

The person who infringes on the right to defend shall compensate for the actual value.

The parties may file a civil lawsuit to protect their rights and request the court to order the other party to bear the corresponding liability for payment.

1. When a party initiates a lawsuit, it shall first submit the indictment, and submit the corresponding number of copies according to the number of opposing parties. If the parties are citizens, the names, genders, years of age, place of origin, and addresses of both parties shall be indicated; If the party is a unit, the name and address of the unit, and the name of the legal representative or responsible person shall be clearly indicated. The body of the indictment shall clearly state the matters requested, the facts and reasons for the indictment, and the end must be signed or affixed with an official seal.

2. Basis"Whoever asserts is the one who gives evidence"In principle, the plaintiff shall submit the following materials to the court:

1. Materials on the plaintiff's subject qualifications. Such as the original and photocopy of resident ID card, household registration booklet, passport, home return permit for Hong Kong and Macao compatriots, marriage certificate and other evidence; If the enterprise unit is the plaintiff, it shall submit copies of the business license, business registration certificate and other materials.

2. Evidence to prove the plaintiff's claim. Such as contracts, agreements, creditor's rights documents (IOUs, IOUs, etc.), receipts and delivery vouchers, correspondence, etc.

3. When a party submits documentary evidence to the court, it shall fill out a list of evidence in duplicate, listing in detail the name and number of pages of the evidence submitted. After the evidence has been verified by the court's undertaker, the undertaker is to sign and seal the evidence list, and one copy is to be handed over to the parties and one is to be recorded.

IV. Within 7 days after the parties have completed the necessary formalities and submitted all relevant evidentiary materials, the case filing division shall handle the case filing formalities for those who meet the requirements for case filing; Where the requirements for filing a case are not met, a ruling is made in accordance with law not to accept it.

5. The parties shall pay the case acceptance fee and other litigation fees in advance within 7 days from the date of receipt of the notice of acceptance, and if there are real difficulties, they may submit a written application to this court for reduction, deferment or exemption within the prepayment period.

6. After the case filing formalities, the case shall be scheduled by the court**, and the parties shall obey the various work arrangements of the court, and settle the litigation costs in the financial office after the case is concluded, and refund the excess and make up for the deficiency.