Where to repair Midea s microwave oven if it fails?

Updated on home 2024-04-19
3 answers
  1. Anonymous users2024-02-08

    Midea**: 4008899316

    Hebei Province > Qinhuangdao City Service Outlets:

    Qinhuangdao City Aerospace Business ****.

    No. 304, Hebei Street, Haigang District, Qinhuangdao City.

    Fax: 0335-3040888

    All maintenance outlets in Hebei Province, please refer to!

    Serial No. Name Address ** Fax.

    1 Handan No. 118, Cemetery Road, Handan City, 0310-3063003

    2 Shijiazhuang Qiaodong Shunmei Electrical Service Department No. 1, No. 82, Dongfeng West Road, Shijiazhuang City, 0311-86026745

    3 Shijiazhuang Fengda Economic and Trade Co., Ltd. No. 36, Zhongwang Road, Youyi North Street, Shijiazhuang 0311-7769208 7729276

    4 Noah Electric Appliance Distribution Service Office, Yuhua District, Shijiazhuang City, No. 460, Huaizhong Road, Shijiazhuang City, 0311-5035145

    5 Tangshan City Lunan Jiahe Home Appliance Maintenance Service Department Tangshan City Lunan District Youyi North and South Street Tie No. 1 Bureau Workshop 0315-5907939

    6 Xinghai Electronics, Zhangjiakou City**** No. 183, Mingde South Street, Zhangjiakou City, 0313-8027480

    7 Baoding Newspaper Gift Center Home Appliance Maintenance Department No. 7-3, Baihua Community, Hancun South Road, Baoding City, 0312-3056466 3391505 3056466 3391505

    8 Baoding Xintie Hardware Company No. 102, Baihua Road, Baoding City, 8 1 302 0312-3039179 3039179

    9 Cangzhou Jinding Founder Electric ****** Intersection of Jianshe North Street and North Ring Road in Cangzhou City (in the former City Department Store) 0317-3010599 3010599

    10 Chengde Da Electrical Appliance **** After-sales Service Department Chengde West Street Library 1st Floor 0314-2036851 2036851

    11 Meijia Electrical Service Center, Handan District, Handan City, No. 118, Lingyuan Road, Handan City, 0310-3063003 3063003

    12 Qinhuangdao Yuhang Commerce**** No. 304, Hebei Street, Haigang District, Qinhuangdao City, 0335-3040888 3040888

    13 Shijiazhuang Fengda Economic and Trade Co., Ltd. No. 36, Zhongwang Road, Youyi North Street, 0311-7769208 7769208

    14 Shijiazhuang Qiaodong Shunmei Electrical Service Department No. 82 Dongfeng Road, Shijiazhuang City 0311-5358399 5358399

    15 Noah Electric Appliance Distribution Service Office, Yuhua District, Shijiazhuang City, No. 54, Huainan Road, Shijiazhuang City, 0311-88964560 88964561

    16 Xingtai Qiaoxi Sunshine Electrical Appliance Maintenance Department No. 1, Zhongxing West Street, Xingtai City 0319-3388856 3388856

  2. Anonymous users2024-02-07

    National unified call center, 24-hour **** service: 4008899315 (free long-distance fee.)

    Why don't you ask this?

  3. Anonymous users2024-02-06

    Hello dear dear, I am happy to serve you: common faults of Midea microwave ovens; 1 No response when powered on, fuse blowing Check the door switch, microwave high-voltage system (high-voltage transformer, high-voltage diode, magnetron, high-voltage capacitor), fan motor, turntable motor. After troubleshooting, it can be replaced with a fuse test machine.

    2 There is no response when the power is on, and the fuse tube is not damaged The mechanical timer and magnetron temperature limiter can be checked in the second mechanical control paved microwave oven. Computer-controlled microwave oven: Observe the fuse of the computer board, check the power transformer and magnetron temperature limiting protector on the computer board.

    After troubleshooting, it can be replaced with a fuse test machine o 3 Repeatedly burn the power fuse Check the door switch and high-voltage transformer first, and then check other devices in the microwave system, such as high-voltage diodes, high-voltage capacitors, bidirectional diodes, magnetrons, etc. 4 It can be operated, but the microwave is not heated First measure whether the high-voltage transformer has power supply in the primary level, and then determine the maintenance range according to the measurement results. If it is measured that there is no AC220V power supply in the primary of the high-voltage transformer, and the microwave oven is mechanically controlled, the timer and door switch should be checked; Computer-controlled microwave ovens, door switches, computer board fire relays and driving transistors should be checked.

    If the high-voltage converter is measured to have an AC220V power supply at the primary level, check the high-voltage transformer, high-voltage fuse, high-voltage diode, and protection diode o 5 The microwave is not heated, and the noise increases or the vibration is large Focus on checking the microwave system, such as high-voltage diodes, high-voltage transformers, high-voltage capacitors, bidirectional diodes 6, circuit voltage problems, Midea's microwave ovens do not heat up and many microwave ovens do not heat up The situation is almost the same, and the simpler external cause may be the circuit voltage problem, which is also a common reason why the microwave oven is not heated. 7. The door interlock switch is broken, and the reason why the second door interlock switch is damaged is that the 220 volt working voltage cannot work normally due to frequent operation, poor contact, and electric shock destruction. You need to check whether the fuse is blown first, and then see if the monitoring switch is normal, if it is normal 8, the high-voltage transformer is damagedMany friends have encountered such a problem, that is, the high-voltage transformer is broken.

    If the light is on but the turntable does not move after the Midea microwave oven is turned on, it means that it cannot be used, if it is normal, then replace the high-voltage transformer. 9. The situation that the high-voltage diode is broken is also often occurring, and the disc is rotating, but it is not heated. If this is the case, it is necessary to test whether the filament winding is normal during maintenance, if it is normal, it is necessary to see if the high-voltage diode is normal, if the test result is infinite, then the high-voltage diode should be replaced.

    10. The spot welding falls off and can be heated after the power is turned on, but the automatic shutdown fault occurs after a few seconds, which is the impact, and the spot welding of the upper half of the microwave oven box falls off, and the whole machine can return to normal after re-welding. Thank you for your patience, the above is my reply, I hope it can help you, I wish you a happy life.

Related questions
4 answers2024-04-19

With the improvement of living standards, household appliances have been widely used and developed. As a common product in kitchen appliances, microwave ovens have the characteristics of a wide variety, different functions and easy to use, which brings great convenience to our lives. So, some people ask, can you bake egg tarts in the microwave? >>>More

6 answers2024-04-19

Method. Method 1.

Material. Chicken wings, sesame seeds, honey, salt, dark soy sauce, five-spice powder. >>>More

22 answers2024-04-19

Microwave Smoke Causes:

The dirt on the heating tube is burned after heating, causing a lot of smoke, because of long-term use, not cleaned up in time, the heating pipe is covered with oil, when using the barbecue or light wave combination function, it will cause the oil on it to smoke because of high temperature; >>>More

6 answers2024-04-19

Cooking in the microwave is actually very simple, with a few tricks in mind, you can steam soft and sweet rice. >>>More

4 answers2024-04-19

With the progress of the times, everyone is paying more and more attention to healthy eating, and the importance of breakfast is even more recognized. >>>More