What s wrong with Huawei Band B5 not opening?

If the Huawei bracelet can't be opened, it should be said that the battery is faulty, or the motherboard is the most likely to fail, it is recommended that you directly contact the official customer service staff of the product for testing and repair.

Hello landlord, in this case, the bracelet battery may be out of power, it is recommended to charge the bracelet first to see if it can be opened, if it still doesn't work, you can only go to the after-sales service to test it.

Is there no electricity?

The warranty for this thing is only one year, and if you exceed one year, you will need to pay for the repair.

It may be that there is no power supply in your motherboard, or that the power supply is out of power, or the wiring is not short-touched, which are generally these three reasons.

It should be out of power, it is recommended to charge it and look at it again, if it doesn't work, you need to go to the after-sales service.

There is no power, the Huawei bracelet consumes power very quickly, and the screen is frequently turned on for two or three days before the power is out.

Is there a problem with water ingress?

Or maybe it's out of power and needs to be recharged.

After saying that, it's normal for this kind of thing to break, you can buy a new one,。。

If it feels expensive, you can use the Xiaomi bracelet inside, which costs just over 100 yuan.

There is a problem with the positioning of the bracelet.

Generally, there is a problem with the battery, and it needs to be disassembled to detect what is wrong.

1.The battery is low and the system is about to be shut down.

Please use the charging base to charge the bracelet. When the bracelet enters the continuous charging state, the bracelet will automatically restart.

2.Wet hands touch or the display has water conditions.

The bracelet does not support wet hand operation of the touch screen. When there is water on the screen or there is a lot of water on your hands, the screen may be unresponsive and you need to dry it before you operate.

3.The software has not been upgraded.

If you have such problems after upgrading, please upgrade to the latest version, or reboot it to try to restore it.

4.Please restart your device.

Due to a business conflict in which the software is running, restart the device for recovery.

If the screen fails, the outer screen can be replaced. Only change the outer screen, not the inner screen, theoretically.

However, the actual situation is that the outer screen and the inner screen are glued together by super glue, and the risk is high and a high level of operation is required to peel off the outer screen without damaging the inner screen.

If you go to a mobile phone store, most of them will not give you a single replacement for the external screen, even if the asking price will not be low. If you're confident in your hands-on abilities, try it yourself.

The failure of the screen means that the screen cable inside the bracelet has been broken, because the cable itself is a relatively fragile thing, sometimes the charging time is too long or the device is overheated, it may be damaged, and you can only go to the official to replace it**Only 150 yuan。

You can go back to the operation after a while to see if the operation is too frequent and cause failure, if the problem is still not solved, you can ask the maintenance center.

If it is said that the screen of the bracelet is malfunctioning, you can see if the response is slow, or the network is delayed. It is recommended to wait a while and try again.

If the touch screen fails, go to repair it, if the cost of repair is relatively high, if you can't get it, you can buy a new one, if you don't want a lot of money, then you can go to repair it.

The reason is that the blue spallation of the phone is not opened.

Solution: 1. In AppGallery.

2. Open Sports Health, click on the first source of bad pages, click + in the upper right corner, and click the bracelet in the list of found devices.

3. After entering the bracelet page, find the bracelet B5 and click to select the Huawei Band B5.

The following describes how to solve frequent disconnections caused by unstable signals.

1. First unlock iPhone 8 Plus and turn on the [Bluetooth] function on the top of the phone.

3. After entering the home page interface of the software, click [Equipment] in the lower right corner.

4. After coming in, click [ + ] in the upper right corner

5. There are all devices here, click [Smart Bracelet].

6. Find [HUAWEI Band B5] in the list and click it.

7. Then click [Start Pairing].

8. After the last pop-up window, click [HUAWEI B5 Bluetooth signal] to pair.

HUAWEI B5 bracelet**Audio can't be opened,Hello,Since you didn't connect the Bluetooth headset with the phone correctly,You can delete the name of the Bluetooth headset that has been searched for so far,And then reconnect; In addition, it may be due to the low battery of the Bluetooth headset, the failure or the low volume of the mobile phone**. Specifically: 1. The mobile phone is not connected to the Bluetooth headset.

The workaround is to re-pair. First of all, turn off the Bluetooth earphone, and then press and hold the multi-function button of the Bluetooth earphone to activate the Bluetooth earphone and re-pair with the phone. Then restart the phone, clear the information of the previous Bluetooth headset, and then search for Bluetooth again; 2. The Bluetooth headset speaker has no slag sound.

The solution is to re-pair the phone with Bluetooth, adjust the volume of the mobile phone, and keep the Bluetooth headset and the mobile phone within 10 meters. 3. The Bluetooth headset has low battery or no power. The solution is to charge the Bluetooth headset with the charger for a period of time, and then press and hold the Bluetooth headset multi-function machine for more than three seconds to turn it on; 4. The Bluetooth headset may have a low voice. The solution is to pay attention to the Bluetooth headset not to contact the water, and when using the Bluetooth headset, the Bluetooth headset should be closer to yourself; 5. The volume of the mobile phone is turned to the lowest.

The solution is to make sure that the Bluetooth headset is connected to the mobile phone, enter the mobile phone settings option, and then enter the sound option, and turn up the ** volume; I hope my answer is helpful to you, and finally I wish you good health and a happy mood again! <>