What about the charger plug? 250

Things may be thin in the process of wear and tear, usually do not pay attention, because today the old tripping so only found, the use of the charger old tripping must be **connected to the power, it is recommended that you buy a new charger.

It's cheap, and if you feel like there's something wrong, replace it.

To prevent safety hazards, it's best to replace it.

The description of the problem is not exhaustive: first, there are no specific parameters, second, there is no brand, and there is not even a full picture of the plug in question. Judging from the plug alone, the subject thinks we can see something, as for the last sentence that makes the respondents obviously feel uncomfortable, is it harsh on everyone, shrimp pig heart!

Regarding the problem of the plug thinning that the subject is worried about, you can rest assured that there is no problem from the picture. No matter what brand, even if it is a garbage charging head, its plug material is mainly copper surface plating, the plating is very thin, and this thing will not be worn easily, the only thing that has ever seen the disappearance of the coating is rapid oxidation under high pressure, but in this case, the copper below will also be burned a gap. The plug plating of the subject's charging head is complete, so there is no thinning, and the subject can rest assured.

In addition, although the input parameters of the charging head are often more than 100 volts, in fact, the power is very low, not to mention that the plug becomes thinner, even if it is less than half, there is no problem, the reason why it is so thick, there are also factors that require a certain strength from the normal use of the plug.

As for the problem of tripping, I don't think it has anything to do with the charging head, at least the subject's description has no obvious signs of relevance.

In the end, the question of the sand man, the subject is a little worried. There is a main gate in front of the circuit at home, there is an indoor empty opening, and there are various safeguards for the charging head (not absolutely, so there is a brand question), even if it is the worst case, even if it blows up (in fact, this thing will not be fried, but it will burn), it will not directly lead to personal **.

The subject really hurt my heart, knowing that although it is not as good as before, there is still a clear stream in the dung pit, for example, you met me today.

There are no obvious traces of electric shock burning on the charger plug, look at your socket should be branded, the reason for frequent tripping is not on these two, and there will be no problem if the cause of tripping is solved.

Answer: The charging socket is indicated in English:

The letter is VOOC, which means OPPO's self-developed flash rush, and its name is VOOC.

There will be a letter logo at the end of the charging cable to represent the ** business (** business logo has F, L, E, none) <>

Generally speaking, the charging socket is AC IN in the case of AC and DC IN in the case of DC.

What do the English letters of these two jacks mean? Which is faster? My oppo is faster, and if your phone battery is large, this fast may be hotter when using this fast.

The charging head has an impact on the outlet.

The charger has been plugged into the socket, although it does not charge the phone, but the circuit board inside the charger is energized, so the charger is in working condition and will consume power. Plugging the charger into the socket for a long time will greatly bury the core, such as shortening the life of the charger. The charger has been plugged into the socket, if the charger is of inferior quality, its own heating is serious, plus its own living environment is closed and the weather is hot in summer, it is easy to create an environment for the charger to spontaneously combust and explode.

The reason why the charger suddenly bends**:

Charger failure or design flaw. There is no overload and short-circuit protection, and the AC voltage is directly input when the transformer fails, resulting in excessive current and breakdown of the mobile phone. If the overload protection of the mobile phone is well designed, the battery mass plexus is good and the design is reasonable, at most it will only penetrate the charging port part of the mobile phone, because the insulator of the overload protection has blocked the input current.

The battery itself. Due to an internal defect in the battery, the battery itself can also cause the charger to be uncharged and not discharged**. The failure or poor quality of the battery itself may also lead to **, but the probability is smaller than that of the charger, usually caused by some external factors such as high temperature, but if the mobile phone circuit design is reasonable, the high current can not reach the battery when it will be cut off by the protection system, and the battery itself will naturally not **.

Summary. Hello, most smartphones, the output specification of the charger is 5V 1A, or 5V 2A, or fast charging type, some fast charging chargers will be marked: 5V 2A, 9V 2A.

This means that 9V 2A is used for fast charging, and 5V 2A is used for charging to a certain extent.

The output of the phone charger plug.

You take a look, I didn't ask yesterday.

Hello, most smartphones, the output specification of the charger is 5V 1A, or 5V 2A, or fast charging type, some fast charging chargers will be marked: 5V 2A, 9V 2A. This means that 9V 2A is used for fast charging, and 5V 2A is used for charging to a certain extent.

I have a plug for this charger, do you see the fit?

Your charger plug is also suitable for 9V 2A can be used.

Summary. Dear, glad to answer for you! <>

There is no uniform regulation on the location of the charging port of the battery car, generally speaking, the location of the charging port will be different depending on the brand, model and charging method of the battery car. Therefore, if you want to know that the charging port is in, you need to understand it according to the design principle and charging method of the electric vehicle.

Don't know where to plug the charging plug?

Dear, glad to answer for you! <>

There is no uniform regulation on the location of the charging port of the battery car, and generally speaking, the brand of the battery car is different, the model is different, and the charging method is different, and the position of the charging port will be different. Therefore, if you want to know that the charging port is in, you need to understand it according to the design principle and charging method of the electric vehicle.

Generally speaking, in order to facilitate charging, the charging port of the electric vehicle Shenque will be arranged near the battery, such as the side of the rear seat cushion, the front wide pin of the seat, the place where the seat is connected to the rear seat cushion, and the inside of the front windshield of the battery car. Some electric bucket cars will arrange the charging port opposite or near the power output plug to make it easier for the owner to find it.

If you really can't find the charging port of the battery car, you can look for the content about the structure of the electric vehicle before knowing it in the electric vehicle manual, so as to find the location of the charging port. In addition, you can also go to the electric vehicle maintenance point and ask the maintenance master to help you find it. If the newly purchased electric car is a brand commonly used before, you can find a charging port according to the previous charging habits to achieve the purpose of charging.