Help, why is the CPU temperature so high 20

It belongs to the previous model of Intel and has a large calorific value.

2.The change in fan speed is due to the automatic speed regulation of the fan, and the efficiency is different at different temperatures.

3.It may be that the silicone grease between the CPU and the base of the heatsink is uneven, not in full contact, and the heat dissipation efficiency is poor.

4.Check that the ventilation of the chassis is done.

5.If possible, you can replace a better fan, Intel's original fan.

It is estimated that it is caused by poor contact between the CPU and the heatsink.

You can remove the heatsink to see if the silicone is in full contact with the CPU.

If not, go to the computer city to buy a box of silicone, apply it evenly, be careful not to be too thick, as long as it looks all white.

What are you looking at the CPU temperature in! If you watch it while playing! That's 100% normal! Maybe it's still low!

If you wake up in the morning and turn it on! After 10 minutes and nothing was done, it was a little too high!

There are two ways to solve this problem! The first is to change the water cooling radiator, and the second is to change the fan to ball!

Also look at how much in BIOS and under Windows!

Check under Windows when opening the Task Manager to check the CPU station usage! If nothing is opened, the station is very high, it may be that you are poisoned! Or you have a problem with your Windows installation!

Personally, I feel that there are programs on the site with your resources!

Are the accessories all new? Has it been overclocked?

And the temperature is you measured or the machine displays... Maybe there is an error =. =

The fan should be a problem with voltage, try to change the CPU, or replace the related parts with friends, compare the situation, and soon know what the problem is.

Because if it's not hot, the eggs won't be cooked!

Just kidding, CPU heating is normal, and hot hands are also normal, so you need a fan to dissipate heat!

1.Fan issues.

Cooling software.

Because I bought it newly, I would like to ask, who installed the computer? What about the technology?

I suspect it's a plastic piece on the boxed CPU that I didn't take.

I've done this when I used to pretend to be myself! ~

In fact, as long as it doesn't crash, it's fine, the temperature is too high, it means that your computer has been used for a long time, the fan is aging, and you will have to change to a new computer in the future.

Overclocking? Or is there a problem with the radiator?

Pentium CPU remember to lower the octave when increasing the main frequency and overclocking. If the heatsink doesn't work well, try not to overclock it.

Clean up the dust first, and then change the fan after it doesn't work, and you can solve the problem.

My CPU is 80 degrees, and when I went to repair the computer, I saw that the fan was broken, and it took two days to get the computer to replace the fan, and why is that? 200 yuan.

If heat dissipation doesn't work, change to a heat pipe radiator.

The CPU fan doesn't work, change to a good one.

Maybe the heat dissipation is not good. The fan is still running.

Master Lu is at the master level. It takes up a lot of resources.

This is because the case doesn't dissipate heat well, causing the heat to form a thermal turbulence around the CPU. It is recommended that you install a cooling fan to enhance the internal heat dissipation of the case.

1 All 1Check whether the system is running abnormal programs, causing a high load on the CPU (in this case, normal programs will become relatively stuck).

2.Open the computer case and remove dust from all parts.

3.Remove the CPU heatsink to further remove its dust, 4Wipe the silicone grease (white, ash) on the base of the radiator and on the back cover of the CPU5Apply a thin layer of new silicone grease to the back cover of the CPU, apply it evenly, and cover the handwriting on the CPU cover, not too much.

6.Install back the CPU heatsink and various other removed hardware7If the temperature is still more than 80 degrees after a while, then find someone to repair it (usually the motherboard is damaged).

8.If you don't have the ability to do it yourself, it is recommended to ask a friend to help, and it will cost you a lot of money to take it directly to the seminary.

Because your CPU fan doesn't work.

The speed is too low, or it is caused by poor heat dissipation.

It's very simple that the heat dissipation of the CPU is not good, it is recommended to change to a better cooling fan, and it is best to apply some silicone from the new.

That's the performance problem of the CPU, not your problem, you can add a heatsink.

The fan speed is too low, it should be around 2900 normally, you remove it to see if it is dirty? Clean it up.

CPU fans generally do not exceed 3500 rpm, and most of them are around 3000 rpm.

There are many possible causes of CPU temperature problems, such as false alarms for temperature measurement, inadequate installation of the heatsink, thermal paste, insufficient power of the heatsink or fan, poor heat dissipation of the host or wind path obstruction, CPU voltage, motherboard problems, ......But it is more common that the quality of the radiator or fan itself is not high.

Here's a complete set of tests and workarounds:

1. Restore the default BIOS of the motherboard, and pay attention to whether the CPU voltage is abnormal. Try changing the BIOS version.

2. Reinstall the radiator to avoid installation problems.

3. The radiator should be evenly and thin. You don't have to buy the kind of ** highest, generally a few dollars a bottle is enough, such as "Star brand DRG-99" This kind of bargain.

4. Pay attention to the heat dissipation of the chassis. For general vertical large chassis, the combination of "front and lower air inlet fan + rear and upper exhaust fan" is the most economical, effective and simple way. This is valid for motherboards, memory, graphics cards, hard drives, and more.

5. False temperature alarms are a common phenomenon. The temperature measurement of hard disks and graphics cards is generally very accurate, but CPUs and motherboards often have problems. After doing the above two points, you can touch the CPU radiator, and sixty or seventy degrees on the copper and aluminum metal must be hot.

There is generally a setting in the motherboard to shut down when the temperature exceeds xx degrees, if it is a false temperature alarm, then turn off this option.

6. Actually, if you are not very particular, then as long as the machine does not crash and restart, don't care about the CPU and motherboard temperature. Of course, there are special ways to test it. If the machine is unharmed for 10-30 minutes, it means that the heat dissipation of your CPU and motherboard has reached the standard.

Note that the CPU and motherboard are very hot during the ORTHOS test, so you need to be prepared. (There are some setup techniques when testing ORTHOS, such as the dual-core CPU should be dual-on and set the kernel correspondence, such as setting a "small amount of FFT" and a higher priority in the software, so as to give the CPU as high a load as possible.) However, it's actually enough to put a lot of pressure on the CPU if you don't set it up, which is definitely not something that the big games can bring.

7. If you don't pass the test in step 6 after you finish the first 5 steps, then solve the problem of the CPU cooler itself. If you want to save money, just see if the fan can be changed alone, and change to a violent fan with high speed (of course, it brings noise problems), and it is not impossible to go down to 5-10 degrees or even more. If it can't be replaced alone, then the entire radiator is replaced, and the more versatile, economical and effective for the general mainstream machine is the "overclocking three-Red Sea-standard version", "Kyushu Fengshen-Bingling 200" and other models, multi-platform general, seventy or eighty yuan **, there are goods everywhere on the market.

Further, models with more than 100 yuan, such as "OC III - Red Sea - Deluxe", "OC III - Red Sea - Extreme Edition", and "Kyushu Fengshen - Bingling 400" are also worth considering.

Watchtower Lord!

Hello, because you changed to a very powerful dual-core processor, his heat generation is naturally very large, the SCO CPU power consumption is large, and the heat dissipation is also large, and the heat dissipation effect is naturally very poor when you use the original single-core CPU fan, so it is recommended that you buy a relatively strong cooling fan.

Apply more heat dissipation silicone!

Well, big brother, what kind of fan are you, generally fans have a minimum speed of 2600.

But you also have a problem with your CPU. What is the frequency of your CPU? Mine is also an AMD Athlonon 3200+, which has a default frequency (i.e. the most normal frequency is.

If your 3200+ is0 or higher. Then it means that when you bought it, the merchant deliberately overclocked the CPU in order to buy it at a higher price.

Overclocking is also the most important cause of abnormal CPU heating.

I guess your CPU has been overclocked, so how do you change back to the system default frequency?

First of all, you need to go into the motherboard's BIOSS to adjust it. There will be an option to adjust the CPU frequency in the BIOSS of the motherboard, of course, the BIOSS is all in English, you should go online to find the Chinese translation of the BIOSS corresponding to your motherboard model before entering, and there are generally tutorials on the Internet for overclocking most of the motherboard components.

Remember not to move around in the motherboard BIOSS, and after finding the option to adjust the frequency of the graphics card, you must adjust it slowly, don't adjust it all at once, I believe you should understand...

And, big brother landlord, can't you use a better fan!!

Thank you!!

It may be because the voltage at both ends of the CPU is too high, and the voltage of the CPU should be reset, but this CPU is not efficient, otherwise change to a fan with a higher speed.

If the blue bird can't do it, you can change it to a heat sink with a heat pipe.