How to connect to the Internet with other computers using a router at home

ADSL: ADSL (Asymmetrical Digital Subscriber Loop) 2. Initial Router Settings: IP Address:

Username: admin Password: admin Step 1:

Enter the username and passwordUsername: admin Password: admin Step 5 of the Setup Wizard appears:

Select the export type, and the setup wizard appears: Set up the external network export adslStep 6: Enter the Internet account and password, and enter the Internet account account, which is similar to 86133833@vpn-cdjyxx initial password: 1234

3. Let the router dial automatically: Click on the network parameter option and select the WAN port setting to let the router dial automatically.

4. Check the router running status: Click the running status option to view the router status.

The normal router running status is as follows: 1. When using firewall and MAC address filtering, you should pay attention to the application of rules. 2. The router should be turned on and off normally, and directly plugging in the power supply will cause damage to the router and cause dial-up delay due to boot self-test.

Connect your computer to the router with a root cable, and other computers will also connect to the router.

**Wire connected"Cats"On the root network cable handle"Cats"Connect with the router to log in.

Username and password: admin (factory settings).

Enter your broadband username and password in the setup wizard to connect.

Subnet Mask: Gateway: DNS: DNS of the local ISP

Subnet Mask: Gateway: DNS: DNS of the local ISP

Maybe the above is slightly different from your actual operation, just look at the manual of your router.

xian you know how to plug it in!!

I don't know your model number, you'd better check his settings IP Different routers have different IPs

I'll give you a few to try I know a limited amount of 83 If you want to enter the username after entering something, some are guest or admin passwords are the same as the account, after entering, find a place where you can enter the username and password, enter your wide loan number and password, and finally click "Confirm" and it's OK, and the rest basically don't need to be set.

The login username is admin, and the password may be admin or empty.

Just take a look at it for yourself.

Resolution.

Check the network configuration.

1. Whether the configured IP address is the same as the IP network segment of the router, if it is not in the same network segment, it cannot be connected to the network.

2. Check whether the driver of the wireless network card is installed correctly, then double-click the network icon on the desktop, then click the network and sharing center above, and then click the change adapter on the left to check whether there is a connection icon for the wireless network card.

3. Right-click on the My Computer icon on the desktop, select Computer Management, and then select "Services and Applications" on the left to find whether the service of WLAN Autoconfig is not enabled, if not, turn on this service.

4. Open the windos7 taskbar icon, enter the "cmd" dos command in the empty box, and then enter "ipconfig all" to find the IP address corresponding to the wireless network connection, which is the current IP, and then enter "ping the default IP of the router, if there is a TTL, it is likely to be an IP address conflict, and it is OK to reset an IP."

The mobile phone is to turn on the wifi to connect to the wifi, as well as to turn on the mobile data, you can connect to the Internet, if it is a laptop, find the wifi switch in the lower right corner and turn it on, select to connect to the available wifi to successfully connect to the network.

If you are on a desktop computer, open the "Control Panel" and find the "Network & Internet" option in the "Control Panel".

Click on this option to go to the network settings page and click on the option "View network status and tasks".

Click on "Set up a new connection and network" and set it up according to the wizard.

Asking questions is that earth symbol.

Asking questions cannot be used.

Ask a network. Can't connect to the Internet

Thank you for asking questions.

Do you mean a local area network? Both computers must be on the same router or switch to prevent problems between the two computers! Then right-click on my computer - Manage - Local Users and Organizations - Users - Guest right-click - Properties - and remove all the checks in it!

Then in the Control Panel - Management Tools - Local Security Policies - Local Security Policies - User Rights - Find (deny access to this computer from the network) - Properties and delete all users in it. Restart the computer and you're good to go.