The cat of telecommunications, recently bought a router, how to wiring, only look at the letters, do

Hello: Router installation method, you first connect the device as shown below.

Enter the address you see on the router in your browser, which is usually.

Then enter,Enter the corresponding account and password,Generally, the newly bought admin is indeed the operation interface,You will see a setup wizard on the left,Enter。

Enter the setup wizard interface.

Click Next, enter the Internet access method settings, we can see that there are three Internet access options, if your home is dial-up, then use PPPOE. Dynamic IP can be used by plugging the computer directly into the network, and there is a DHCP server on the upper layer. The static IP is generally a private line or something, or it may be a cell bandwidth, etc., and the upper layer does not have a DHCP server, or wants to fix the IP.

I chose PPPoE because I dialed.

If you choose PPPoE dial-up Internet access, you need to fill in the Internet account number and password, which should be understood by everyone, and there will be an account number to open broadband, and it is OK to fill it in.

I hope I have been helpful to you, and if you have any questions, please feel free to continue to consult us.

According to your description, connect the incoming cable to the cat, connect the cat to the router, and then install it as follows:1Connect the network cable to the router, first set the IP of the computer wired connection to , open the browser and enter (some are, the computer IP is set to enter the user name:

admin password admin

2.Find a setup wizard in the router, step by step, select the PPPoe dial-up method, and set the Internet access and Internet password, 3If you need to set the wireless password, you can set the corresponding settings here, but finally set the encryption method to WPA2, because the password of the WEP encryption method is easy to crack, and it doesn't matter if you don't need it.

4.Make sure that the DHCP service is turned on in the router so that the computer can automatically get the IP address.

Hello, first of all, thank you for your support to China Telecom. According to your description, you can use a network cable to connect your broadband modem and router, and then use another network cable to connect the router and the computer, enter your router**, username and password to enter the router settings page, and enter your broadband account number, password, etc. according to the prompts on the page. If you need to check the bill and pay the phone bill, please log in to the online business hall of Anhui Telecom.

Have a great day! Hope mine is helpful to you and can get yours!

1. The WAN port of the network cable connection route from Modern;

2. Then use a network cable to connect the LAN port of the router and the computer;

3. Open the browser, enter , or , and fill in the original username and password in the pop-up login box. The specific IP address, username, and password, you have to look at the label on the back of the route, which is generally written.

4. After entering the operation interface of the route, select "pppoe" in the link mode, and then fill in your broadband and password, and save it.

5. Restart the route!

This is the most basic route setting, and once you are familiar with the route, you can move on to other more advanced operation settings!

The network port of the cat is connected to a single port of the router. The 4 continuous ports on the router can be connected to any computer. Then the computer logs in to the router or the username and password is admin to try it.

**The cable inlet end is plugged into the black separate empty inside, and the network cable entering the host is plugged in from the four yellow ports.

There is a notebook desktop line that is not the same.

1. If it is a broadband cat connection wireless router that needs to be dialed, set it up according to the following rushing method:

1. When the wireless router is plugged in, don't connect the cat first, and connect the computer to any LAN port of the wireless router.

Enter the IP address of the router in the address bar of the browser (on the label behind the router), and enter the login username and password to enter the settings page;

3. Set up according to PPPoE (ADSL virtual dialing), enter the Internet access and password;

4. Set the SSID, encryption method and .

Password; 5. Save and restart;

6. After setting, connect the network cable from the cat LAN port to the WAN port of the wireless router.

Second, if it is a clear defense route that does not require dial-up, the cat is connected to the wireless router, it is set according to the dynamic IP mode, and the method is the same as above.

ITV's account and password are not the same as your Internet account password,1:There is a cat in front,Followed by a wireless router to make a respectful device,The account and password of broadband are automatically pulled out by the router,ITV and the computer can be directly connected to the LAN end of the router,But after a period of time,TV may not have a picture,According to telecommunications,ITV and broadband are to be opened separately and take two ** lines in。

2: Imagine that the network cable at the input and exit end of the cat directly enters the switch, and then the switch comes out with two network cables, one enters the wireless router to pull out the broadband account, and one enters the ITV set-top box to pull the ITV account, so that they can not interfere with each other, and they can all be used.

1. You first look at the IP address assigned to you by the landlord for your online Internet access.

2. Your tp-link

The gateway of a 340G wireless router is:

At this address, the landlord's incoming line is connected to the WAN port of the router, and then you enter your own wireless router and configure the WAN to be simple and automatically obtain the IP address to save. This way, your router will be able to communicate with the landlord's cat. Your desktop computer is then connected with a network cable to one of the 1 to 4 ports of the router.