After passing the first class construction engineer and cost engineer, is it easy to find a job?

Of course, it is easy to find a job with a first-class construction engineer certificate, and there are many projects in the national construction market every year, and the demand for construction project managers is also huge.

First-class constructors and cost engineers, as well as registered supervision engineers are all in charge of the Ministry of Construction, and can only be registered or affiliated with the same company, and it is best to take the qualification examination of other ministries, such as asset appraiser and so on.

The examination of the first-level cost engineer is not easy, and its difficulty is no less than that of the first-class constructor.

The professional technical and metrology subjects of the first-level cost engineer examination are divided into four majors: civil construction engineering, installation engineering, traffic and transportation engineering and water conservancy engineering. Candidates need to choose one of the majors to apply for the exam.

Although the cost engineer examination has been carried out for a year after the implementation of the new policy, 2019 is the first year of the new examination for transportation engineering and water conservancy engineering, so the difficulty of the examination of various professional subjects is still uncertain. However, what is known is that the installation engineering is more abstract, while the civil engineering major is more computational.

The difficulty of the first-level cost engineer exam is still relatively large, and its difficulty is not under a building, so you need to take it seriously when preparing for the exam.

The difficulty of the cost engineer is still relatively large, and it can be said that the difficulty is above the first-class constructor. But the key to learning is personally, as long as you prepare for the exam seriously, there is nothing difficult or not difficult, and there is nothing that you can't pass the test.

There is no way to give an accurate judgment on the difficulty of the first-level cost engineer exam. However, it is not inferior to the difficulty of the examination of a construction engineer, according to the experience of the previous construction examination, the calculation involved in the examination of a cost engineer will be relatively large, and the pass rate in recent years is also floating around 7%, so students who want to participate in the examination this year should seize the time and prepare for the exam seriously.

For people like me who have passed the cost engineer exam at one time, I must think that the cost engineer exam is easy to take. But there are many people around me who say that it is not easy to take the test, but, as far as I know, the pass rate of the cost engineer exam is also average, if you want to apply for the exam, it must depend on your own situation, if you review well, it is certainly not difficult to pass, right, I don't need to tell you the details of the exam here. If you have any doubts, you can go to the "Cost Pass"** to see, go there to find the cost engineer exam preparation experience, and see what those seniors say.

Construction project cost management: there are many basic subjects and subject knowledge points, and the amount of information is large, which needs to be fully mastered. It's easy to pass, but it's hard to get a high score.

Looking at the pass rate of the cost engineer shows that it is not so easy to test, and the difficulty is not lower than that of a first-class constructor.

It's not easy to take the test, and the pass rate is very low in the industry.

4. Civil engineering.

Difficulty: The difficulty of the exam is moderate, as long as you review according to the syllabus, it is not difficult to pass.

Subject characteristics: 1. The content of each chapter is independent of each other, and the knowledge points are scattered;

2. It is necessary to have certain on-site construction experience and basic knowledge of engineering measurement

3. Familiar with the basic knowledge of civil construction technology and municipal construction technology.

2. Read more books and don't miss any of the contents

3. Pay attention to the past questions, and it is best to mark the past questions of the past three years in the textbook

5. Case analysis.

Difficulty: The above four subjects are combined, and there are many knowledge points involved, and most of the exam questions are calculation questions.

Subject features: 1. The topic is comprehensive is the characteristic of the case subject, and each topic involves multiple knowledge points;

2. The question type is relatively fixed, but the amount of calculation is large

3. It has a strong correlation with the first three courses, and needs to have a certain foundation in public courses.

Suggestions for exam preparation: 1. Lay a solid foundation in the first three courses.

2. Be able to summarize and achieve integration.

Web Links.

As far as the difficulty of the exam is concerned, it is still more difficult for cost engineers to start Yousen reminds that no matter what kind of study, self-study is more difficult, it is recommended that you can apply for a learning course, first someone points out the direction, and then you can also study with teachers and classmates It is still good.

The first-level cost engineer exam is still very difficult, with three basic course exams and one case, each of which is difficult. In the field of engineering, second only to structural engineers, and higher than supervision, construction and consulting, case difficulty is a common problem for most people.

However, it is precisely because the examination of this first-class cost engineer is not easy to take and the difficulty is not simple, so the gold content is very high, and it also has a high market recognition.

The cost engineer and first-class constructor exams are relatively not easy, and they both require a lot of effort to prepare for the exam, which is more difficult and more professional than the two.

First of all, let's talk about the first-level constructor examination, the content of the first-level constructor examination has four examination subjects, namely "Construction Engineering Economy", "Construction Engineering Project Management", "Construction Engineering Regulations and Related Knowledge", "Construction Engineering Management and Practice", of which the first three subjects are objective questions to answer, relatively speaking, it is relatively easy to pass the examination in the first-level constructor examination, and the final "Professional Engineering Management and Practice" is a subjective question to answer, which is generally more difficult, and it is also the key subject of the annual constructor examination to regulate the pass rate.

The content of the cost engineer examination is also four examination subjects, namely "basic theory of engineering cost management and related regulations", "engineering cost valuation and control", "construction engineering technology and measurement", "engineering cost case analysis", the same first three subjects as objective questions to answer is also the annual cost engineer examination is easier to pass the subject, "engineering cost case analysis" is a subjective question to answer, is the comprehensive use of the first three subjects, generally more difficult.

The Constructor I Examination is required to pass four subjects in two consecutive examination years, which is deemed to have passed the Constructor I Examination to obtain the qualification to practice.

Since 2018 (including the results of 2017), the cost engineer examination has passed all the subjects in four consecutive examination years, which is deemed to have passed the cost engineer examination to obtain the practice qualification.

From the perspective of the subject setting and the rolling years of the grades, the content of the cost engineer exam is more detailed and more difficult. The first-level constructor exam focuses on the understanding and memorization of on-site construction technology and theoretical knowledge, while the cost engineer exam focuses more on application, and there is more data to be memorized in the cost engineer exam. Therefore, the difficulty of the cost engineer examination is greater than that of the first-level construction engineer examination, of course, the first-level construction engineer examination is also very important in the registration examination of construction projects as the post qualification certificate of the project manager in the construction engineering industry.

It is difficult, relatively speaking, the cost will be more difficult.

Cost engineers focus on project budgets. Take four subjects.

1.Cost Management 2Project Valuation 3Technology & Metrology 4Case study Registered cost engineer is divided into civil engineering and installation majors.

The first-level constructor also takes four subjects.

They are: 1Laws and Regulations 2

Project Management 3Engineering Economics 4Practical (including construction, mechanical and electrical, municipal, water conservancy and hydropower, highway and many other majors.)

The application requirements are different for the two. Cost engineers are more rigorous.

The number of years of service should be counted from the time you get it. This is true for both academic qualifications and academic qualifications. The first-class constructor is different, and the working years of the academic degree can be counted from the age of 18.

As for the difficulty of the exam, it's hard to say. It depends on where you came from. If you are good at math, it is certainly good to take the Registered Cost Engineer exam.

However, the economy of the construction of the project must also be counted. In fact, the exam is not about how difficult it is, but mainly depends on what you want to do after the exam. And where your interests lie.

If you want, you can take the first-level constructor exam directly. First take the exam for a construction engineering major, which is relatively simple. After the exam, you can add municipal administration or other majors, which is also good.

With multiple majors, the cost is also high. It's also good to use it yourself and take it out to find a job.

If you pass the exam as a registered cost engineer, you can go to the office. The income is also quite high. If you pass both certificates, then you are an authentic gold collar! For me personally, it is easier to be a first-class builder.

The cost is relatively more difficult to take the test, you can click on my avatar to have free materials and exam preparation experience, etc.

The first-level cost engineer is not easy to test.

The first-level cost engineer exam is still a bit difficult, it has a total of four subjects, of which in addition to the management is relatively easy to pass, the remaining three are not easy. Metrology knowledge is scattered and covers a wide range, which is difficult to memorize and understand. There are a large number of pricing questions, and the questions are prone to traps when calculating.

The case question covers a wide range of content, it includes the content of the other previous subjects at the same time, and the amount of calculation is very large, and most candidates do not have enough time when taking the case exam.

Case analysis and measurement are more difficult, case analysis is a variety of calculations, on the last question and the actual connection, the others are theoretical calculations, although measurement is a multiple-choice question, but the theoretical knowledge is more, easy to mix, not very easy, the most difficult is the case analysis, followed by measurement.

Exam Notes

1) Examiners can enter the examination room 30 minutes before the test; 5 minutes after the start of the test, you are not allowed to enter the test room, and you can only hand in the papers and leave the room 2 hours after the start of the test.

2) Examiners can only bring black ink pens, 2B pencils and erasers, and calculators with silent and textless functions when entering the examination room. Scratch paper is available in the examination room for the examiners to use, and it will be collected after the exam.

3) During the examination, the examiner must bring his or her original valid resident ID card or social security card and paper admission ticket to take the examination, and both certificates are indispensable.

4) Examiners should consciously maintain the order of the examination venue, obey the management of the examination staff, abide by the discipline of the examination room, and if there are violations of discipline and regulations, they shall be dealt with in accordance with the Regulations on the Handling of Violations of Discipline and Violations in the Professional and Technical Personnel Qualification Examination (Order No. 31 of the Ministry of Human Resources and Social Security).

5) After the end of the test, if the test paper is identified by technical means and other means, the test result will be invalidated.

The two certificates of first-class constructor and cost engineer are very valuable, and they can be taken if they meet the application conditions. The following is a comparative analysis of the difficulty and value of the two certificates by Dali Education:

1. Examination subjects.

Registered Cost Engineer Examination Subjects: "Basic Theory and Related Regulations", "Engineering Valuation and Control", "Engineering Technology and Measurement" (this subject is divided into two majors: civil engineering and installation, candidates can choose one) and "Case Analysis".

Among them, the "Professional Practice" of the first construction and the "Case Analysis" of the cost engineer are both subjective questions, and the other three subjects are objective questions, and each subject is actually relatively independent.

The main content of the four courses of the first-level constructor is biased towards understanding and familiarity, while the cost engineer requires the learner to master the relevant professional knowledge in detail and depth, so it is a bit difficult.

2. According to your own work needs.

The division of labor between the two is different, the first-level constructor belongs to the global online school of engineering construction management, and the registered cost engineer belongs to the project cost and belongs to the budget category.

The most important thing is to look at the direction of development, generally speaking, there are more people who take the first-level constructor exam.

If it is more contact with the engineering site, a construction will be easier to test, and if the contact cost is more, the cost may be easy to test.

If the work you are engaged in is not related to both, it is best to take the first-level constructor first, at least the books are understandable, and the cost engineer may be difficult to understand without guidance.

3. Value comparison.

The salary of the cost engineer is relatively high, and the cost engineer belongs to the technical post and the knowledge is very professional; The first-level constructor belongs to the management post, and the knowledge is very broad, but it only involves a little scratch, and it is more general.

However, cost engineers are more difficult and not easy to pass the examination, and are second only to architects and structural engineers in the engineering qualification examination.

Comparatively speaking, the first-level builder is much simpler and does not require much foundation. The first-level constructor is very important to the qualification of the construction unit, so it is mostly used for affiliation.

The cost engineer is a professional and technical post, and has the right to sign in the project overview, budget and final accounts, and the affiliation is lower than that of the builder. If you talk about the development prospects, the annual salary of senior cost engineers can reach one million.

The cost is more difficult than a building, and the gold content of the cost is higher.

A construction difficulty coefficient, cost difficulty coefficient.

I was a one-time construction (municipal) in 2011 and a cost in 2012. The contrast is as follows:

1. The cost is a little more difficult than a building. But a construction is a little bit more expensive than the cost.

2. As long as the cost is deep and familiar, the routines are basically fixed, but the moves are complex, and you need to be proficient over and over again, and then you will be very confident in the examination room.

One building is to see, see more, see more. The moves are very simple, but there are too many moves, and they may be test points everywhere, so if you want to be confident, you have to read the book carefully (only talk about practice).

3. After the cost test, I basically know whether I have passed, and I know if I have passed the test.

4. There is a foundation for construction, in which cost management basically does not need to take effort, and other subjects also have some foundation, so the difficulty coefficient of cost can be reduced.

The four sections of cost engineers are sorted from easy to difficult as follows:

Construction Engineering Technology and Metrology (Civil Engineering, Installation).

Basic theory of project cost management and related regulations.

Project cost valuation.

Case study of project cost.