How does the spindle of a Falak machining center rotate directly

Generally, the operation panel of the machine tool will have the spindle forward transmission (clockwise rotation), the spindle stops, the spindle reverse (counterclockwise rotation) button, and the spindle can be started in the J0G that is, in the manual state, and its speed is the last speed of the spindle. Or under the MDI window, enter and exit the M03 spindle (clockwise rotation), M04 S (counterclockwise rotation), S is r min (how many revolutions per minute), and press the cycle to start. After booting back to zero, in MDI mode or programming mode, there must be M3 instruction first, press the reset button and then enter S, and the spindle should be able to rotate when the program starts.

If you input S directly in MDI mode, it may alarm, and some systems can enter S in MDI mode and then press the spindle to rotate.

CNC milling machine. It is an automatic processing equipment developed on the basis of general milling machine, and the processing technology of the two is basically the same, and the structure is somewhat similar. CNC milling machines are divided into two categories: without tool magazine and with tool magazine. Among them, the CNC milling machine with a tool magazine is also called a machining center.

Input S+ speed in MDI mode to rotate the spindle directly. Or there is a spindle rotation function in the quick screen. Directly enter the speed and confirm, press start to do.

MDI input S600M3 press the cycle start button and it will turn.

Summary. 1. First of all, you have to determine what kind of zero return method your machine tool uses, whether it is the absolute origin or the incremental origin?

2. If it is the absolute origin: first modify the parameter 1815 5 to 1, and then rotate the axis of the origin you need to adjust the origin about two times, and then shut down and restart;

3. Then you need to set the axis of the origin to move to the origin;

4. Set the parameter 1815 4 to 1, which is not to move the axis, and to shut down and restart directly.

5. Boot back to the original point, and the setting is completed.

If you use an incremental origin, you can modify the parameters 1005, 1815, 4, etc.

Wish. Professional maintenance of CNC machine tools.

Frank machining center, how to set the zero point under the premise that the turning table does not move.

1. First of all, you have to determine what kind of zero return method your machine tool uses, whether it is the absolute origin or the incremental origin? 2. If the sock mitigation is the absolute origin: first modify the parameter 1815 5 to 1, and then rotate the axis of the origin you need to adjust the origin about two times, and then shut down and restart; 3. Then you need to set the axis of the origin to move to the origin; 4. Set the parameter 1815 4 to 1, which is not to move the axis, and to shut down and restart directly.

5. Boot back to the original point, and the setting is completed. If you use the incremental origin, you can modify the parameters 1005, 1815, 4, etc. Wish.

Professional maintenance of CNC machine tools.

It's just that the A-axis is zeroed and it still needs to be shut down.

Shut down and restart. Ok thanks.

M03 S3000 (3000 rpm for positive spindle rotation).

Click the quick CNC spindle forward rotation Enter the speed to confirm and press start.