ni mhaaa 600mah 9 6v how many milliamps

200MW should be a high-frequency output power.

The current consumption of 150mA should be the power consumption of 150mA * 8 (cells) * x 8 Ni-CD batteries (600mAh) should be rechargeable batteries, the capacity of each cell is 600mAh, and the capacity of the same battery remains unchanged after being connected in series.

12v 50mA should be the battery pack that allows you to charge this with 12v 50mA current, so it is the standard charging method, charging for 15 hours.

If you are dealing with a transformer, the theoretical current of the transformer bridge rectifier is about 150mA*, because to consider the margin, the transformer should choose 300mA or more. If you choose a regulated power adapter, because the current is 150mA, with 12V 200mA or greater current, this voltage has always been 12V, but the transformer is not necessarily 12V, it depends on the circuit structure.

NI-MH, this is a nickel-metal hydride battery, pro.

Ni-MHAA600mAh is a nickel-metal hydride AAA (No. 7) battery with a capacity of 600mAh

A single battery is a combination of 8 batteries, and the voltage and capacity remain unchanged at 600mAh

It doesn't matter. Electrician common sense, the current depends on the load.

On the contrary, the battery has a large capacity and can support it for a longer period of time.

Judging from the information provided by the landlord, the landlord's battery should be a battery pack composed of 5 strings of AAA, and it is a nickel rotten hydrogen battery, and the highest charging cut-off voltage of the nickel-metal hydride battery is, 5 strings of AAA need a charger with a cut-off voltage of 9V, as for the charging current, it mainly depends on the internal resistance of Li Lizhao's battery, the capacity of the main battery of the whole building, and the charging current is controlled at about 300 milliamperes, that is. If the battery still heats up, then it proves that the internal resistance of the battery is very large, and the charging current should be reduced.

Feast

This one. Maybe Zhiheng can help you.

Look at the network &&& address: ww** go to ** number"Copy Open Branch.

Hello! Your title is incorrect.

Ni-CD stands for nickel-cadmium battery.

NI-MH stands for NiMH battery.

The nominal voltage of both types of batteries is.

Nickel-metal hydride and nickel-cadmium have AA type, AA stands for battery type, which is called No. 5 battery in China.

800mAh represents a battery capacity of 800.

NiMH AA can do 2300mAh normally, code: H-AA2300 Nickel-cadmium AA can do 900mAh normally, code: D-AA900 I hope the above Dianchizhidu's answer can help you.

The voltage of a nuclear battery is volts, and the amount of electricity is. If the battery pack is connected in series by multiple batteries, the voltage is added, if the battery pack is connected with multiple batteries in parallel, the voltage is constant, and the power is counted as one, and the number of batteries is added as much as possible.

Voltage volts 800 mAh.

Then you just press 800.

The charging time is determined by the charger and the battery combined, which is divided by the capacity by the charging current and multiplied by the time.

10V voltage 400mAh charger will do.