The router has two lights on, and the mobile phone shows that it is connected to wireless, but there

The router needs to be set up before you can access the Internet.

1. Connect the line between the network cable, the router and the computer, and start the computer and the router equipment;

2. After starting the device, open the browser and enter it in the address bar to enter the wireless router settings interface. (If you can't get in, please look at the nameplate at the bottom of the router or the router instruction manual, the default settings of different models of routers are different.) ）

3. An account and password to log in to the router appear in the settings interface, enter the default account and password admin, or refer to the manual;

4. After successful login, select the interface of the setup wizard, which will automatically pop up by default;

5. After selecting the setup wizard, a window will pop up to explain that you can set the basic parameters of the router through the wizard, and click Next directly;

6. Set up step by step according to the setup wizard, select the Internet mode, usually ADSL users choose the first PPPoE, if you use other network service providers, select the following two according to the actual situation, if you don't know how to choose, directly select the first item to automatically select, convenient for novice operations, click next after selection;

7. Enter the password applied for from the network service provider, and go directly to the next step after the input is completed;

8. Set the wifi password, try to make the alphanumeric combination more complicated, and it is not easy to be rubbed off the network.

9. After entering correctly, it will prompt whether to restart the router, select Yes to confirm the restart of the router, and you can access the Internet normally after restarting the router.

See if the cat's network is networked, see if the line between the cat and the router is connected in good condition, solution:

1.Properly connected to the network, 2Restart the router (if that doesn't work, you can restore the router to the manufacturer).

Hello Kiss is happy to answer this question for you. 1. What's going on with a light on the router 1. When the router is on a light, it is likely to be the power light of the router. We can connect the router's cable with the computer network cable, if the router does not light up and does not work, it means that there is a problem with the network cable.

2. If the router can be used, and the network does not have any faults, it means that the display light of the router is broken, in this case, we can ignore it, as long as the network can be used normally, friends who really mind can replace the router or find a professional manufacturer for maintenance. 3. If the router has a light on, cannot connect to wifi, and there is no problem with the network at home, it means that the router itself has been damaged, perhaps because the router is old or usually does not pay attention to maintenance, so that the internal parts of the router are damaged, and there is no way to work normally, at this time we need to replace the router. Extensions:

2. What are the precautions for using the routerWhen we use the router, we must restart the router regularly, so as to extend the service life of the router.

Summary. The router light is normal and can be connected to the wireless network, but the reason for the failure to access the network is analyzed

The router lights are all normal. Mobile phones can also be connected to Wi-Fi. Just can't use it? What's going on.

The router light is normal and can be connected to the wireless network, but the reason for the failure to access the network is analyzed

Cause 1: The network line is faulty. [Home Network Environment Wiring]:

1. There is a cat (modem): cat (modem) - router WAN port; The LAN port of the router --- a computer. 2. No cat (modem):

Network cable --- router WAN port; The LAN port of the router --- a computer. Cause 2: The router has an incorrect Internet setting and you need to reconfigure the router.

Solution: Reset the router and set dialing again.

How to reset the router: Method 1: There is a button [RESET] button on the back of the router, press and hold for 5 seconds, and the indicator light on the router panel will be off and then on, which means that the router is reset.

Set router dialing: The computer IP and DNS settings are automatically obtained.

1. Open the browser - enter the general router address is this or view the login information on the back of the router) Enter the route - enter the user name and password, (the default is generally admin). 2. In the [Setup Wizard], select [PPPoe Dialing] (some are ADSL Dialing), enter your Internet username and password according to the prompts, and save. 3. In [Network Parameters] --WAN Settings], select [Normal Mode], and select [PPPoe Dialing] in the three options of [Connection].

The next step is to select [Auto Connect], Save, and Exit. 4. If you want to use wireless wifi, your router must have a wireless routing function, in the settings, turn on the wireless routing function, here, the wireless signal signal is changed to one of them.

The strongest anti-interference. You can also set a password for your Wi-Fi connection.

After the router is set up, you still can't access the Internet even if the Internet access and password are correct, for the following reasons:

1. If the broadband is in arrears or expires, you need to pay or renew it in time. 2. If the network cable is loose, both ends of the network cable need to be plugged in tightly. 3. If the device is used for a long time, the optical modem and computer can be powered off for 10-20 seconds, and then the power supply can be turned on and restarted.

Summary. 1. If only one light is on the router, it is possible that the power light is on, but the other lights are not on. If the power light is normal, then check whether the port of the network cable has any poor contact, unplug the network cable, and then plug it back in.

2. If the yellow light flashes, it means that there is nothing wrong with the network cable, it may be that there is a problem with the route port of the router, and then you observe it again, there is a letter called WLAN, if this interface flashes normally, it means that the network connection is normal.

What's going on with the router having only one wireless light on.

Can you add, I don't quite understand it.

1. If only one light is on the router, it is possible that the power light is on, but the other lights are not on. If the power light is normal, then check whether the port of the network cable has any poor contact, unplug the network cable, and then plug it back in. 2. If the yellow light flashes, it means that there is nothing wrong with the network cable, it may be that there is a problem with the route port of the router, and then you observe it again, there is a letter called WLAN, if this interface flashes normally, it means that the network connection is normal.