The basic practice of kiting is how to do it

Brief instructions. Kite-making tools: paste, paper cutter.

Materials for making kites: bamboo strips, gauze strips, horse-drawn paper.

Features of the square kite:

1) This square kite, which is now the most used and the most common.

2) The skeleton of the kite is very simple to make up of two sticks.

3) Although the method is simple, there are many changes in appearance, and many things can be made with some effort.

Method:1First of all, the bamboo strips are soaked in water, so that the bamboo strips are soft, and then the bamboo strips are broken with a knife, about one-third of the thickness, and then the half shape is repaired, because the bamboo strips will be pasted on the horse-drawn paper later, if it is too thick, the bamboo strips will break the paper, and the bamboo strips are too thick, and the yarn paper strips will not be stable.

Cut the trimmed bamboo strips into two lengths of about 16 inches and 23 inches. The next step is to cut the mara paper into a square, about 24 inches long, which is a very coarse paper that is best suited for kites.

2.At this point, you can stick the bamboo strips on the paper, but remember to tie the long bamboo strips with gauze paper to the third of the short side, and then slowly bend until the ends of the long bamboo strips touch the opposite corners of the paper and stick it well.

3.The last step is to attach the tail of the kite to the underside of the kite, and after the angle between the line and the kite, you can take off.

4.The tail of the kite is the main tool for balancing the kite, when the kite rides the wind, if one side is heavier, the kite will be biased to this side, and the tail is better to be longer, because the longer it is, there will be a weight The head of the kite rises, so that the whole body is affected by the wind, and the oblique side is balanced. 5.

The silk thread of the kite can be divided into round threads and row rollers with cowhide thread, cotton thread, glass thread, etc., and the thread can be tied to the kite at an oblique angle.

When flying a kite, we can't help but have a few questions that we want to ask? Do all kites have to have tails to fly? Does it have to be windy to fly a kite?

Most people think that a kite must have a long tail, what do you think? In fact, a kite can fly without a tail. The main function of the kite's tail is to unload the wind and maintain the balance of the flight.

Therefore, a kite does not have to have a tail, as long as the position of the string is adjusted, a kite without a tail is just as fun. The reason why kites can fly depends on the wind. The so-called wind refers to the flow of air, and the magnitude of the wind is generally determined by the speed of the air flow parallel to the ground.

For a kite to be able to take off and fly in the sky, there are several conditions that must be in place:1There must be a certain amount of wind force so that the kite rises more than gravity.

2.There should be a pull pull from the release point. 3.

The kite itself must have the inclination of the windward side and the position of the string, so that the kite faces and the footline form an elevation angle before it can be lifted into the air. In fact, as long as the kite material is light enough, the wind is strong enough, and the structure is reasonable, there are natural conditions for flying. So can you fly a kite when there is no wind?

It is often assumed that kite flying should be outdoors in a windy place, but indoor kites completely overturn this unbreakable notion that how to generate air movement in the absence of wind. That is to take advantage of the movement of the operator .

I would like to introduce you to the basic materials and methods of koala kites. Basic materials: a piece of paper the size of A4, about 30 cm of thread, 2 strips of golden paper (the tail of the kite), scissors, tape, pencil, rainbow pen.

Method: Step 1: Take a piece of A4 paper, draw a koala pattern on it, and then color.

Step 2: Cut it out and then cut it with a knife on the koala's head, to the neck area. Step 3:

Glue the thread to the bear's back, then pull the thread to the front and glue the head together. Step 4: Glue two pieces of golden paper to the back end of the bear, which is the tail of the kite.

That's it !!

Kites were invented by ancient working people in the Spring and Autumn Period of the Eastern Zhou Dynasty in China, and have been around for more than 2,000 years. Over the long years, our ancestors have created many patterns that yearn for a better life and symbolize auspiciousness. These patterns skillfully use people, animals, flowers and birds, sun, moon and stars, wind, rain, thunder and lightning, etc., with myths and legends, folk proverbs as the theme, and make a perfect integration with kites.

So how do you make a kite?

First of all, prepare a piece of paper with good toughness, thin and light, 50 cm long and 30 cm wide, and the paper used to make traditional kites is generally made of cotton, rice paper, leather paper, etc. Prepare two more sticks of wood, one 30 cm long and the other 50 cm long, fold them to form a cross and tie them with rope. The top of the cross is 15 cm high and the lower part is 35 cm high, glue the prepared paper to the cross with a glue gun, cut off the excess, and prepare two nylon ropes.

Tie the two ends of a rope to both ends of the short wooden strips, and then tie one end of a slightly longer nylon rope to the ** of this nylon rope, and connect a bundle of very light strings at the end of the nylon rope when preparing to fly, so that the kite will fly higher and higher.

The production process of kites is relatively simple, and the production methods are also diverse, and the above method is the easiest way, and you can make kites through simple materials.

The Bagua kite is a traditional Chinese kite, and its shadow can be seen everywhere in the north and south of the river.

Generally speaking, Bagua kites are suitable for flying when the kite is large, and the experience of flying shows that the stronger the wind, the greater the angle of the kite. Because it belongs to the hard beat category, there is no place for the wind, so the wind state of the kite has a close relationship with the change of the wind, if the wind is unstable, the gossip kite is very interesting when flying, one up and one down.

The Bagua kite is simple to make, and the requirements for the production materials and lashing are not very strict, as long as you follow the requirements below, you can generally achieve the purpose of flying.

Bagua kites get their name from the shape of the kite, because it is octagonal, because it coincides with the traditional Chinese gossip, so it is called gossip, and in painting, it is generally painted with traditional gossip graphics.

1. The skeleton of Bagua is composed of two square shelves, and the size of the general square skeleton is between 500-1000mm. However, the size of the two squares is required to be the same, and according to the size of the kite, the 500mm size can only be set with a stick of bamboo.

2. If it is larger than this specification, a cross-shaped skeleton should be set, and the size of the bamboo strip should be larger, and the thickness direction should be larger than the width.

3. Taking a 500 mm Bagua kite as an example, the four bamboo strips that make up the square are 3 mm wide and high and 500 mm long.

4. Tie two square skeletons with sharpened bamboo strips, and then tie the two squares together to form an octagonal.

5. The masking material of the kite is the same as that used for the kite. The kite has three strings.

6. Like the tadpole kite, when flying, the kite is also drawn into an arc with a thin line in the center of the kite, so as to facilitate the kite to relieve the wind when flying. (If you don't pull it into an arc, the kite can fly as well, so you might as well try it).

7. The painting of the gossip kite generally uses the traditional gossip pattern. The tail of the gossip kite is generally tied to a thin string with a paper tassel, and it is done.

1. Cut out the shape of the kite.

Draw the desired shape on a piece of plastic paper, cut it out with scissors, and then glue a wooden stick to the top of the paper.

2. Cut out the shape of the red paper.

Use a piece of red plastic paper to cut out a desired shape, and glue the red paper to the other side of the white paper.

3. Make small holes in the paper.

Use a blue marker pen to draw a fixed position on the plastic paper, make a small hole with the tip of the pen, and tie a rope to the top of the kite.

4. Attach the kite tail.

Then make a long strip of tail out of red plastic paper and glue it to the bottom of the kite, and you're done.

Kite flying: Kite flying is one of the traditional folk games, and the festival customs of Qingming Festival. Kites are also known as organs, paper harriers, harriers, and paper kites.

Originated in China, it is a communication tool invented by the ancient working people, the first kite was made of bamboo by Luban, and later only paper kites were found in the imperial palace. Hokkien is called wind blowing. A kite is a heavier than air product that can float in the air with the help of the wind.

In the late Tang Dynasty, people added bamboo flutes to the paper kites, and the paper kites were blown by the wind after flying into the sky, making a "woo" sound, like the sound of the zither playing, so people changed the name of the "paper kite" to the "kite" in modern times, and the organ was used as a general term, including the paper kite without a whistle. The city of Weifang is known as the kite capital.

The kite practice is as follows:Prepare materials: newspaper, bamboo strips, red thread, kite string.

1. First take a piece of newspaper, you can also use a cloth and fold it as shown in the picture below.

2. Then cut off the excess part of the newspaper, and after opening, cut out a square of newspaper, as shown in the figure below.

3. Then prepare two thin bamboo strips, preferably fresh bamboo, because of good elasticity and easy to bend.

4. Then, as shown in the figure below, fix the bamboo strips to the square newspaper, and one of the bamboo strips should be bent. It is more convenient to fix it with adhesive tape.

5. Take another piece of newspaper and cut out six strips of paper on the longest side.

6. Fix 6 strips of paper on the kite, as shown in the figure below.

7. Cut out two more lines, fix them to the kite as shown in the figure below, and glue them firmly with tape, so that a kite is ready.

8. Finally, take a look at the scene of flying a kite in the wild, it is easy to fly.

The production of kites is somewhat simple, and some are more complex, depending on the requirements for shape and quality. Beautiful and flying high, it takes a lot of effort to design and craft. Kites in general are not so difficult to make.

Here's an entry-level kite making method for reference.

Prepare items to make kites, such as paper; thin sticks; adhesives, etc. to build a thin stick into the silhouette of a kite. Note that the interface is tied firmly with a wire.

You can also wrap a layer of paper around the stick, so that you can put on the cover for a while. Dressing the kite frame paste, including material selection, cutting, mounting, correction and other steps.

Cover the kite. Pattern the kite through color selection, base color, line drawing, retouching and beautification.

Make three tails for the kite, stick it first or not, and see the actual situation when flying.

In addition to triangles, it can also be made into a diamond shape, and the method is similar, but the shape changes slightly.

For kite tie and test flight, the line is best to use a strong one, fly high and take it back. The position of the tie line may affect the kite's takeoff, so pay attention to the adjustment.

Finally, the rope tied to the kite, tied to about 1/2 of the position, can not be tied too high, tied below the position is about the horizontal position of both ends of the bow bamboo wire or a little below. Tie it and drag the rope with your hands, pull up the kite and run for a while, and try the force on the kite.

Hope it helps.

Make a bamboo rack and stick it with newspaper, and you're done.

Use a small saw to see a notch at the port of each stick. Be careful not to point the saw at you. Measure the center of one of the sticks, make a mark, and place the mark on the other stick at a distance of 20 cm from one end.

Glue the two wooden sticks together, wrap them around with a rope a few times, and tie them up. Straighten the rope and wrap it around a kite frame along the 4 sawn holes. Pull the rope tight, then tie the rope into a knot at both ends.

At the four ends of the wooden frame are wrapped around the rope through the gap, each place is tightly tied with the rope after a few more turns. Today, the kite frame has been successful.

The practice of ordinary kites is generally to use bamboo as a skeleton and paper as meat. Bamboo is the main material used to make kite skeletons. Bamboo with a wall thickness of 3 5 cm was selected and cut into bamboo chips, and the toughness of the bamboo pieces was used to make the skeleton of the kite.

Make a variety of kite skeletons according to your hobbies, such as dragonflies and butterflies.

The kite making method and steps are as follows. Material preparation: bamboo, cotton thread, plastic paper.

Steps:1First, make a diamond-shaped kite skeleton and tie the four corners of the skeleton with cotton thread.

2.Then, the plastic paper prepared for the size of the skeleton is suitable for the size of the skeleton, and cotton thread is threaded on each of the plastic sheets corresponding to the four corners of the skeleton and tied to the skeleton for fixation.

3.Finally, tie one end of the prepared long cotton thread to the skeleton, the other end to the prepared wooden stick, and wrap the excess in the middle around the wooden stick first.