Internet access in the dormitory, buy a wireless router, won t get it

The wired signal is more stable, but if it's in a dormitory, it doesn't matter. If you have a laptop, it's much more convenient to use a wireless router. In addition, the range of the dormitory is very small, and for computers in this range, the signal attenuation is small, and there is basically no obvious difference between wired and wireless.

In addition, this router should also have a wired jack, which also supports network cable access.

The connection is the cat-route-computer. Set to enter the login address of the router in the address bar of your IE window, generally, how much is written on the manual, and after logging in, follow the prompts to fill in the account number of your network card, password, open a wireless network or something. It's set,Exit the settings interface,Turn on the routing power later, he will automatically log in according to the account password you gave,Remember to buy a new card to enter,It's best for a few of you to pool money to buy a monthly or seasonal card,It's also very affordable。

The time is only timed when you go online, and it doesn't usually time, of course, you have a connection, and you have to have a wireless network card.

Even if the cat is turned off, even if the route is closed, even if the military department is disconnected, the cat still has to calculate the time when the route is turned off.

The built-in wireless network card of the laptop can search for signals sent by other wireless routers, provided that the other router does not have a password, you can click to steal it. Is your router just wireless, no wires? Generally it's either wired, or it's a wired plus wireless router, I don't know if the cat you said is wired or wireless, if it's wired, then you change your router to wired plus wireless, if the cat is wireless, then you just replace the cat with your wireless router, that's not good, about the design of the router, you need a network cable to connect the computer and the router, and then follow the steps on the router manual to do it!

However, if there are more people using the router, it will be very stuck!

Yes, after buying a wireless router, you have to set it up, borrow a notebook, plug it in, and then set the settings inside the router and turn the router on.

The wireless router of the home version is generally equipped with a wired interface. You can try TP-link, not advertisement, because that's the brand I use.

It's good, I haven't had a problem in a few years.

tp-link

Trouble, thanks!

Buy a wireless router for dozens.

Internet fees, you still have to run an Internet ** Telko, Mobile, Unicom.

Telecom is too expensive, and China Mobile Unicom is now about 50 monthly subscriptions, unlimited time and unlimited traffic.

But I don't know if the school is mobile or not.

ps: I use 4M Unicom 60 a month with a speed of 400K+

Hello, it can be used. If you don't have broadband at home, you can only use 3G Internet access.

Yes.. OK..

I use wireless on my phone every day.

Wireless routers had better set a password, otherwise they would be stolen by others and occupy the network speed.

The premise is that your phone supports wife

OK.. The premise is that you are sure that your phone supports WiFi wireless function.

Here's how to install it:

1.When the power is on, the computer is connected to any interface in router 1-4 (the WAN port is not connected temporarily).

3.The initial login username and password are admin.

4.After opening the router settings interface, find the WAN port setting of network parameters, select the WAN port connection type as "PPPoe", and then fill in the correct Internet account and password, and save.

5.To prevent others from stealing your wireless network, it is recommended to set an access password for your wireless network, find Wireless Settings Wireless Security Settings, type your own private password and save it.

6.After exiting, the network cable or home fiber access WAN port will be sent out of the modem, and the desktop computer will be connected to one of 1-4. As long as the desktop computer is connected to the Internet normally, your phone can be wirelessly connected.

2.The router is a device that sets up a LAN to achieve network sharing, and the general connection and setting methods are as follows: connect the network cable out of the broadband cat to the WAN port of the router, connect each computer to the LAN port of the router, the IP address of the computer network card is set to be automatically obtained, enter it in the address bar of the computer browser, and specifically check the network dust parameters obtained by your computer network card, and log in through the IP address of the gateway) Log in to the router, and the general username and password are admin, Select the WAN port settings, and set your broadband account and password to the PPPoE mode. 3.

If the laptop uses wireless Internet access, the operation is as follows: right-click the online neighbor - properties - right-click the wireless network connection - view the available wireless network, click your wireless network name in the searched wireless network - connection, and enter your wireless network key for verification, after passing the verification, you can connect to the wireless router to surf the Internet normally;

That's how I did it, my mobile phone and ipad can access the Internet, which is very convenient. This setting is very simple, and there is a way to set it on the routing manual, as long as you have a computer.

Accessing a wireless router on a campus network involves the setting of a router string router.

There are two ways to set the LAN port, and the other is to set the LAN port.

1. When setting LAN port access, modify the LAN port address of the router to be in the same network segment of the main router of the campus, and it does not conflict with the IP addresses of other connected network devices. For example, the address of the main router of the campus LAN is set to any address between the LAN addresses of the router that is reconnected, and this address cannot conflict with the addresses of other network devices that have been accessed, otherwise the Internet cannot be accessed).

At the same time, turn off the router's DHCP service. After setting the LAN address, you can access the Internet normally after setting the wireless connection password, and you can also leave the wireless connection password at all.

After the router is set up, plug the network cable port into the LAN port of the router.

2. Set up the WAN port method. If the router can automatically obtain the IP address assigned by the total router, the default LAN port address of the router must be different from the same network segment as the main router, for example, the total router address is :, and the router that reconnects must be set to be as long as it is not in the same network segment.

Then set the IP address of the WAN port to be obtained automatically, and set the wireless connection password. Then plug the network cable port into the WAN port to access the Internet normally.

If you cannot automatically obtain the IP address assigned by the total router, you need to enter it manually. The prerequisites are as follows: first change the LAN port address of the router. If the address of the LAN port is the same as the address of the total router, a conflict will arise between the two ports, resulting in the inability of all devices to access the Internet.

The network method you said is different from the one used at home.,It requires the client to recognize the language.,The account can't pass the router authentication.,You still don't try.,Unless you can crack the client.,Of course, your account will be deactivated if there is an abnormality.。 Another point is that the Star Express account you mentioned is only on one computer, and it can only be accessed by one MAC address, so please don't think of any other way, or change to a longer network cable.

Wireless routing is also useful, allowing you to group a LAN in your dormitory and play LAN games like CS.

It is recommended to try to negotiate the installation of wired fiber broadband or ** line access broadband, if it really doesn't work, you can use a laptop to search for wifi, don't use a mobile phone, the ability of mobile phone wireless search is too poor, it is best to use wireless routing to search, if there is CMCC or chinauion, passwordless access to wifi, then congratulations, you can use the luxury version of mobile or Unicom WLAN, you can go to the business hall to open, if not, you can also log in with a mobile phone number, The speed is quite fast, and the only drawback is that it is expensive.

Of course, you can also use your mobile phone as a router to connect your computer to the network of your mobile phone, I won't talk about this cost, Apple can use a data cable, or open a personal hotspot, and Android directly open a personal hotspot.

Finally, non-wired broadband is super expensive.

Useless Neither wifi signal nor broadband.

Data Network Promise. E-commerce sells them for $5, $10 and $30.

As long as there is a net, you can rub it. Hehe. It looks like advertising for him, I haven't used it myself, but I have it around me.

The effect is pretty much the same.

2.Use your mobile phone to access the Internet.

- You can use the PC suite that comes with your phone to connect to the computer to surf the Internet, and this fee is the data of your mobile phone card.

- If you don't have a kit on your phone, you can use Bluetooth to connect to the Internet. This is a lot of searches on the Internet, and it's very simple. You can try.

However, this fee for traffic is very fast, and there are cards that sell unlimited data on the Internet, but they are also expensive. In this way, the Internet is suitable for you to go to QQ, and the traffic is less.

3.Look at whether your dormitory has a ** line, our dormitory is directly connected to the 201** line, using the network on the campus pioneer. For details, you can consult the operator of your dormitory**, such as Netcom and Unicom.

This way the Internet is good, the speed is fast, there is no traffic limit, 4If you want to go on the Internet without spending a penny. Then you can crack someone else's wireless network password.

You search for bt3 on the InternetYou can search for a bunch of tutorials. This principle is actually the same as rubbing the network card, but rubbing the network card is automatically cracked, the speed is fast, and you don't need to do it.

I've done my own research and can crack it, but only in the way wep encryption, WP2 has not been experimented yet.

Well. That's it, that's all I can think of. Good luck. Hehe.

Cracking is troublesome and not necessarily successful.

What kind of dormitory are you? Is it impossible to live without a network?

If you have a ** line, you can connect to the Internet, do you want to call 10000 (Telecom), 10010 (Unicom), 10086 (mobile the latter 10050 (Tietong)) customer service to ask.

There are really only two ways, if you want to rub the Internet, you must have a router, and you must be within 50 meters of your residence. There is also a way to get on at airports or in places where there are routes installed in some large public places. Finally, it is recommended that you see if there is any fiber thread in the school to build a thread.

Or go with a few people to pull the string.

A few people can pull a network cable, find three people, lead a 2m one, and one person will be 20 yuan a month.

You can buy a router that rubs the network, you can crack the password yourself, and you don't have to worry about it at all.

Negotiate with others, install broadband together, and then buy a router, invite 4 roommates to access the Internet, and it is not expensive to spread it evenly.

To school installation sprinkle. Talk to the school.