What is the size of leather shoes 240 How to buy leather shoes

1. Appearance In addition to choosing your favorite style, you also need to pay attention to whether the stitch size is uniform and whether the two shoes are completely symmetrical. Then place the toe of your shoe facing you, flat on the counter, and see if the point of contact between the forefoot of the sole and the counter is in the center of the forefoot. If there is a deviation, it is easy to deviate sideways on the foot, resulting in deformation of the shoe.

2. Sole. There are two types of leather soles: leather and rubber. The leather sole has a bright and smooth surface, uniform color, no oil spots, stains and scars, and uniform thickness; Flick with your fingers, the sound is crisp, and the hand model feels very solid.

This sole is flexible and plump, with high tensile strength and strong abrasion resistance. The rubber sole has a smooth and consistent surface, neat patterns, and the corners of each pattern should be bright and complete. From the side, the cut surface is uniform and meticulous, without impurities, no large and small particle structure, and no uneven thickness; Touch with your hands, you should have good toughness and elasticity.

If it is adhesive leather shoes, it is necessary to check whether the bottom edge is tightly bonded and smooth, and there can be no gaps and glue residue. The lightweight synthetic resin base feels the best, and it is light and wear-resistant.

3. Size. Leather shoes are chosen with comfort in mind. Generally speaking, it is better to be able to completely stress the width of the foot when the foot surface is stressed; The length is that the toes are not clamped or topped, and the feet do not slide inside the shoes when walking.

In addition, the time to buy leather shoes is also particular. People have a slight swelling of their feet in the afternoon, and the shoes purchased at this time are of the right size; If you try on shoes in the morning, you should leave room for them so that you don't wear them for a long time and squeeze your feet.

4. Air permeability.

Synthetic leather has the worst air permeability in leather shoes (easy to sweat when wearing, foot odor, not only can the feet stand it for a long time, but the artificial leather on the surface will also fall off a small piece). Generally, natural leather shoes have better air permeability, especially pig leather is the best, because the pores of pig skin are several times thicker than those of cowhide, and the pores are much larger, and sweat is easy to discharge. But leather is not as beautiful as cowhide.

One thing to add: pigskin is generally used as the lining of shoes.

5. Leather. There are two types of leather uppers: smooth leather and reverse leather. The smooth leather shoes have uniform grain thickness, smooth and fine, without wrinkles and scars; The brightness and color are uniform, the color is bright and vivid, and there is no phenomenon of light and shade and shade.

Press the skin surface with your fingers, the wrinkles will appear evenly and fine, and when you release your fingers, the fine lines will disappear immediately; The hand mold feels soft and smooth, elastic, not stiff, and the thickness of the leather is uniform and moderate. The reverse leather shoes, the surface fluff is fine and soft, uniform, the color is consistent, there are no coarse long fibers and oil spots, no obvious wrinkles and scars, and the touch is the same as that of smooth leather shoes.

Generally, animal leather shoes will not fall off after 2 to 3 years.

38 yards, 240 means 240 mm of foot length, which is 24 cm when converted to centimeters. Shoe size.

The conversion formula is:

Number of centimeters 2 10 = European system, (European system + 10) 2 = number of centimeters. 240 is 24 centimeters, which corresponds to the European size converted to =24*2-10=38 European size.

Centimeters 18+US, US +18cm. The US size corresponding to 24cm = 24-18 + US size.

The number of centimeters 18 = imperial, imperial +18 = the number of centimeters. The imperial size corresponding to 24cm = 24-18 = 6 imperial size.

240 (is a size 38 shoe.) There are two kinds of shoe sizes used in our country, one is the British and American system, the value is relatively large, that is, 36 sizes, 37 yards and the like, and the other is formulated by our country, called the foot length, in centimeters or millimeters, which is usually called 23cm or 230mm.

240 is a size 38 shoe. 240 of them is the number of millimeters and belongs to the international yard.

Indicates the length of the shoe, generally we use 24cm to denote, it is also a Japanese size, and the Japanese size is actually the length of the shoe. The conversion of Japanese code to Chinese code is: Japanese code 2-10 = Chinese code.

So we can know that 240 on the shoe size is what we are used to saying 38.

The size of shoes, also known as shoe sizes, is commonly marked by international, European, American and British markings. The international standard shoe size indicates the number of millimeters of foot length, and the Chinese standard uses millimeters or centimeters to measure the size of shoes. Such as:

123 means in millimeters, while it means in centimeters, and in fact the two refer to the same thing.

To determine if the shoe is the right size, you can do it by measuring the length of the foot. After measuring the length of the foot, you can choose the size of the shoe according to the inner length of the shoe.

The length of the foot refers to the apex of the longest toe to the heel.

The horizontal straight-line distance between the protrusions. Be careful not to measure the foot directly, there will be a large error in the direct measurement, but use white paper, step on the white paper, draw the four sides of the foot with a pen on the white paper along the foot, or mark the front and back end of the foot respectively; Measuring the length according to the foot diagram drawn is the foot length.

People's left foot and right foot are not exactly the same, some will be bigger, some will be smaller, we still use the longest foot as the basis for choosing shoe size. It is also recommended to measure the length of the feet in the afternoon, because the feet of the people will be slightly swollen in the afternoon, which is also a key factor affecting the length of the feet.

240 is a size 38 shoe. Among them, 240 is the number of millimeters, which belongs to the international size, which indicates the length of the shoe, generally we use 24cm to represent it, and it is also a Japanese size, and the Japanese size is actually the length of the shoe. And the conversion of Japanese code to Chinese code is:

Japanese size 2-10 Chinese size, so we can know that 240 on shoe size is customarily said to be 38 size. The size of the shoe, also known as the shoe number, is commonly marked by international, European, American and British markers.

The size of shoes (shoessize), also known as shoe size, is commonly marked in the following ways: international, European, American and British. The international standard shoe size indicates the number of millimeters of foot length.

The Chinese standard uses millimeters or centimeters to measure the size of a shoe. For example, 123 means in millimeters, and it means in centimeters, and the actual number of lead and silver is the same as the two references.

General ways to measure the length of your feet and the length of your feet:1. Put on the socks that you usually wear for exercise.

2. Choose the larger foot to measure.

3. Put a piece of paper under your feet, and prepare a pencil and ruler.

4. Press the whole body weight on the foot to be measured, so that the arch of the foot can be complete, and the arch of the foot supports the weight of double the body weight, and the approximate length and width will increase by a few millimeters.

5. The red line shown in the figure below is the foot length and foot width.

38 yards. According to the conversion formula between Chinese code and international code: Chinese code is equal to European code plus 10 and then multiplied by 5, so 240 mm is equal to 38 yards.

Shoe size, also commonly known as shoe size, is a standard unit system used to measure the shape of a human foot in order to fit a shoe. In 2013, the shoe sizes used by countries around the world were not consistent, but they were all high cracked and included two measurements: length and width. The length refers to the length of the wearer's foot and can also be the length of the manufacturer's last.

Even within the same country and region, shoes for different groups of people and for different purposes, such as children's and sports shoes, have different shoe size definitions.

It should be 38 yards.

The general size we usually talk about is actually the French size, and now the shoes are generally marked with the American size.

I don't really understand the specific conversion method, but I know how big the two sizes of shoes I wear are.

I myself wear a size 36 in the generic size, which is the 230 marked on the top of the shoe. Use this to calculate that 235 is 37 yards and 240 is 38 yards. For every 5 digits added to the French size, then the US size adds one number.

Shoe sizes all over the place. 1. Europe.

The shoe size of France, Germany and other continental European countries is generally calculated as follows, and the unit of staring is centimeter:

Shoe size = last length = foot length + 2).

However, the exact size may vary slightly depending on the quality of the last.

2. North America. Shoe sizes in the United States and Canada are last lengths measured in inches

Men's shoe size = 3 * foot length - 22

Women's shoe size (common) = 3 * foot length.

In addition, there is a relatively rare women's shoe size that is produced by the American Footwear Association (footwear in

Dustries of America).

Women's shoe size (FIA) = 3 * foot length - 21

The shoe size for both boys and girls is calculated as the men's shoe size+.