Theodolite angle how to display 87 87 87 on the theodolite display

60'' one degree? You can adjust zero first, and then rotate, thick 87 ° in the eyepiece, and then slowly rotate a button, I forgot the specific name, slowly adjust, as for 87 ''It seems that it is not easy to adjust, what is the accuracy of your photoelectric theodolite? 87'', you can estimate, but don't exceed his precision.

If the situation allows, a total station is still used. Convenient and precise. All benefits and no harm (except for the instrument itself, which is more expensive.)

It is impossible to realistically produce this result, and if your instrument shows such a display, then the instrument must be broken.

You can set the angle unit to 400 blocks or 6400 slots, or not!

The theodolite hits a 45-degree angle, how many degrees is displayed on the theodolite?

The theodolite is an instrument used to measure angles, divided into two dials, and the remainder is one for longitude and one for latitude. If the theodolite is at an angle of 45 degrees, then it should show 45 degrees on the longitude dial and 0 degrees on the latitude dial. Because the 45-degree angle is on the plane of the Earth's equator, it is said that it follows the direction of the meridian rather than the direction of the parallel.

Summary. My dear, the theodolite is 45 degrees, and 45 degrees is displayed on the theodolite, because the angle is the number of degrees displayed by the theodolite.

The theodolite hits a 45-degree angle, how many degrees is displayed on the theodolite?

My dear, the theodolite is 45 degrees, and 45 degrees is displayed on the theodolite, because the angle is the number of degrees displayed by the theodolite.

The best reading range of the theodolite is 0 90 degrees of horizontal angle reading, first of all, Zen dismantle and change the small reflector under the instrument, in the reflector Shiga judgment is in the position of the royal grip, the reading lens next to the eyepiece can see the reading, before the reading must be rotated to align the vertical line in the small window, and then read. The number above is the degree of the angle, the number of the concave is the number of tens of cents, and the number on the lower number is the single digit of the cent. The lowest number is the number of seconds in the corner.

Theodolite, not level, the total number of theodolite is 360

Let the theodolite hit an angle of 45 degrees, and it will be displayed as 315 degrees on the theodolite, because the Duanwu theodolite is 360 degrees for a week, assuming that it is 270 degrees now, if you turn 360 degrees to the right, the reading is still 270 degrees. If it's 10 degrees, turning 100 degrees to the left will still read 270 degrees. A 45-degree tan burn is rotated left and right, so it is 315 degrees.

Degree is an angle, and it is necessary to know whether it represents longitude or latitude. In general, longitude is expressed in the range of -180 degrees to 180 degrees, while latitude is expressed in the range of -90 degrees to 90 degrees. If the degree represents the longitude, then the angle should be marked with E or W, which represents the east longitude and the west longitude of the spring slag, respectively.

If degrees represent latitude, then n or s should be marked after the angles, representing north and south latitudes, respectively. For example, it represents the degree of north latitude and the degree of east longitude. On a liquid hood theodolite, it may appear similar to 36°51'36''n or 36 ° 51'36''e such forms.

Summary. The horizontal angle in an electronic theodolite refers to the angle of rotation on the horizontal plane, usually expressed in radians or percentiles, rather than in degrees. When using an electronic theodolite, it needs to be placed on a horizontal plane so that it can measure the horizontal angle.

The electronic theodolite can detect the horizontal angle through the built-in sensor and then display it on the screen. In some cases, it may be necessary to convert the horizontal angle to degrees for calculations or to compare with other data. At this point, you can use an angle converter to convert radians or percentiles to degrees.

The horizontal angle in an electronic theodolite refers to the angle of rotation on the horizontal plane, which is usually expressed in radians or percentages, rather than in degrees. When using an electronic theodolite, it needs to be placed on a horizontal closed surface so that it can measure the horizontal angle with the bend. The electronic theodolite can detect the horizontal angle through the built-in sensor and then display it on the screen.

In some cases, it may be necessary to convert the horizontal angle to degrees for calculations or to compare with other data. At this point, you can use an angle converter to convert radians or percentiles to degrees.

Can you add, I don't quite understand it.

The angle converter converts Bishen radians or percentiles into degrees. Here are the steps to convert using an angle converter: Determine whether the amount you need to convert is radian or percentile.

If it's radians, you need to convert it to percentages or degrees. Radian to percent: radian value 180 ) 100% radian to degree:

Radian Value 180) enters the value of radians or percentiles into the angle converter. Determine the output format that needs to be converted, whether it is a degree of focus or another format, such as degrees, minutes, and seconds. Click the "Convert" button and you can get the converted result.

It should be noted that different brands of angle converters may be different, and you need to refer to the corresponding manual when using them. In addition, for engineering measurements that require high accuracy, it is recommended to use high-precision angle measuring instruments for measurement and conversion.