How to make the screen turn on when the phone calls?

The phone calls on the screen, it is a mobile phone will turn on the screen, this is the default setting, and it cannot be canceled, if the phone does not turn on the screen, it means that there is a fault.

If you don't have special settings, under normal circumstances, when our mobile phone comes, the mobile phone screen will automatically light up.

You don't need to set it up.,The phone will automatically turn on when you call.,Unless you're in your pocket, he won't.。

This is set in the settings and then clicks on the call method.

Normally, if the mobile phone has that function, you can directly set it up or find that kind of software, such as a caller show.

You don't need to operate all your phones, and the screen will be on when you call in!

If you want to measure your own convenience when the phone calls, then you need to go to the phone settings to set it.

The setting method of the automatic black screen of the ** screen is as follows:

Tools Raw materials: Huawei nova 4e,, setup.

1. Open your phone's settings and tap Accessibility.

2. On the accessibility page, find the anti-Huai first mistake lead chain digital touch mode button.

3. Slide the slider to turn off the anti-mistouch mode, and you can remove the black screen.

The method of setting the screen of the mobile phone is as follows:

Tool: Huawei P30 Pro, .

1. Turn on your phone, find and tap the settings option on the main interface of your phone, and swipe down on the settings page that appears.

2. Find the notification option and click Wild Call to enter.

Information features

1. Dependency. Matter is a concrete, tangible resource; And information is an abstract, intangible resource. Information must be attached to a material carrier, and only a carrier with a certain amount of energy can transmit it.

Information cannot exist independently of matter and energy. News information cannot be reflected without facts, language, and newspaper layouts that have a certain time and space.

2. Reproducibility. Material and energy resource shortcodes are reduced as long as they are used; As information is used, it is constantly expanding, regenerating, and never running out. In today's world, on the one hand, there is an "energy crisis" and a "water crisis", while on the other hand, there is a "surge of information".

3. Deliverability. If there is no transmission, there is no information. There are many ways to transmit information, such as oral language, body language, hand-copied text, printed text, telecommunication signals, etc.

OriginOS 3, OriginOS Ocean, and OriginOS: Go to Settings > Notifications & Status Bar > Lock Screen Notifications, turn on "Show Lock Screen Notifications", then turn on "Alert when you receive a Lock Screen Notification", click the required software, and set it to display Lock Screen Notifications.

IQOO UI, and FunTouch OS versions: Go to Settings - Notifications & Status Bar Status Bar & Notifications - Turn on "Show Lock Screen Notifications or Show on Lock Screen" - Turn on "Alert or Alert When Lock Screen Notification Received", then go to "Manage Notifications" - Find the software needed - Turn on "Show Lock Screen Notifications on Lock Screen".

FunTouch OS: Please go to [Settings - Notifications & Status Bar - Turn on Bright Screen Reminder and Show Switch on Lock Screen], and then enter [Settings - Status Bar & Notifications - Manage Notifications - Find the Corresponding Software - Turn on Show on Lock Screen Switch], and the screen can be turned on normally after the message comes.

FunTouch OS: Please go to [Settings - Notifications & Status Bar - Turn on the screen when you lock the screen notification] to turn on this switch. Then enter [Settings-Status Bar and Notifications-Find the corresponding software-Turn on the lock screen display switch], and then the screen can be turned on normally after the message comes to the pants.

FunTouch OS Previous: The phone does not support third-party software to turn on the screen when a message comes in.

Go to the phone settings - sound and vibration - Do Not Disturb mode, check whether the switch is turned on, turn on the Do Not Disturb mode, and the screen will not turn on when incoming calls are turned on.

Note: After the Do Not Disturb mode is turned on, the phone will not ring when the screen is off, and the screen will not turn on. The caller icon will only appear at the top of the screen if the call comes in when the screen is on. In Do Not Disturb mode, turn on Allow Interruption and Repeated Calls to Ring, and the screen will turn on for contacts that are allowed to disturb and repeated calls within three minutes.

2. Check whether the screen rotation function is normal in other scenarios.

For example, after turning off the vertical screen lock, turn on the automatic rotation of viewing ** in the built-in album program (go to Settings - Application & Permissions - System Application Settings - Album - View ** when auto-rotation - select "Always" to turn it on.) Note:

The old version of the album can turn on the switch of "automatic rotation when viewing**"), click ** to see if it will automatically rotate when viewing;

If all scenarios are abnormal, please go to the customer service center for testing;

3. Confirm whether the system is the latest version.

The new version improves compatibility and stability, go to Settings - System Upgrade, it is recommended to observe after upgrading the system.

4. In addition, when the mobile phone calls, put the mobile phone close to the ear (not connected at this time**), some mobile phones will turn off the screen, and some mobile phones will still keep the screen on

Due to the different configuration parameters of each product, the performance of some of the quiet functions and interfaces may be different, the description of the phenomenon is due to the difference in infrared-related design on the mobile phone, so it will make some mobile phones close to the ears when calling (not connected at this time**), some mobile phones will turn off the screen, and some mobile phones still keep the screen on, this phenomenon is not an abnormal function of the mobile phone.

If you have more questions, you can enter the vivo official website vivo**app--my--**customer service or the web version of vivo official website--scroll down to the bottom -**customer service--enter manual customer service to enter the consultation and understanding.

Go to Settings - Sound & Vibration - Do Not Disturb Mode Focus mode, the relevant functions are turned on, and the screen will not turn on when incoming calls come on.

Note: Turn on Do Not Disturb Mode Focus mode, when the phone is off, incoming calls will not ring, and the screen will not turn on; The caller icon will only appear at the top of the screen if the call comes in when the screen is on. Turn on Allow interruption and repeated calls ringing, and allow interruption of contacts and repeated calls within three minutes will turn on the screen.

2. Check whether the infrared sensor is blocked.

Please check whether the IR gripper is blocked by other objects (such as dirt, mobile phone film, protective case, etc.), and it is recommended that you check and clean it before trying again.

3. Use the default dialing software.

If you are using third-party calling software, it is recommended that you go to Settings with caution - Application and Permissions More Settings - Permission Management - Permissions - Default Application Settings - Dial - Replace with the "**" that comes with the system

4. Confirm whether the system is the latest version.

The new version improves the compatibility and stability of stupidity, enter Settings - System Upgrade, it is recommended to observe after upgrading the system.

If the above methods fail to help recover, it is recommended to call the customer service center in advance to confirm the relevant matters and understand the working time, so as not to delay precious time.

1. Set it in the call settings, first click to dial, and the function key below the point dial shows that there is a setting, click on the silver to talk about it and click on more** settings, there is a status setting when there is an incoming call, enter and turn off the distance sensor, and that's it.

2. There are many reasons for the black screen of the mobile phone, it is recommended to replace the new battery first, you can replace the authentic original mobile phone battery, or use our domestic Hony battery such as a well-known brand of business battery, if the battery can be used normally, it means that the phone is fine, mainly because the battery is faulty.

3. Now only mobile phones generally have distance sensors, which are generally touched on both sides of the mobile phone earpiece or in the groove of the mobile phone earpiece, which is convenient for its work.

4. When the user is answering or dialing**, put the mobile phone close to the head, and the distance between the distance sensor can be measured to a certain extent, then notify the screen background light to go out, and turn on the background light again when taking it away, which is more convenient for users to operate and save power.

1.It is recommended to remove the third-party screen protector or case and try again;

2.It is recommended to restart your phone and try again;

3.It is recommended to back up important data and restore it to factory settings for attempt;

4.If the above solution cannot solve the problem, please bring the purchase invoice, warranty card and mobile phone to the nearest OPPO customer service center for testing and processing. Before you go, please prepare a copy of the mess in advance and migrate the messy limb materials of the mobile phone (the data of the safe and QQ WeChat need to be backed up and migrated separately); Finally, before going to the service center, please contact the service center staff in advance to confirm the after-sales service.

Set the incoming message screen to turn on, you can view:

OriginOS 3, OriginOS Ocean, and OriginOS: Go to Settings > Notifications & Status Bar > Lock Screen Notifications, turn on "Show Lock Screen Notifications", then turn on "Alerts when you receive lock screen notifications", click the required software, and set it to display lock screen notifications.

iQOO UI, and FunTouch OS versions: Go to Settings - Notifications & Status Bar Status Bar & Notifications - Turn on "Show Lock Screen Notifications or Show on Lock Screen" - Turn on "Turn on Screen Alerts When Lock Screen Notifications Are Received or Use Screen Alerts", then go to "Manage Notifications" - Find the software needed - Turn on "Show Lock Screen Notifications on Lock Screen".

FunTouch OS: Please go to [Settings - Notifications & Status Bar - Turn on Alerts & Show on Lock Screen], then go to [Settings - Status Bar & Notifications - Manage Notifications - Find the Corresponding Software - Turn on Show on Lock Screen Switch], and the screen will turn on normally after the message comes.

FunTouch OS: Please go to [Settings - Notifications & Status Bar - Turn on the screen when you lock the screen notification] to turn on this switch. Then enter [Settings-Status Bar and Notifications-Find the corresponding software-Turn on the lock screen display switch], and then after the message comes, the screen can be lit up normally.

FunTouch OS Previous: The phone does not support third-party software to turn on the screen when a message comes in.

If you are using a vivo phone, you can set the message to turn on the screen as follows:

OriginOS 3, OriginOS Ocean, and OriginOS: Go to Settings Calendar - Notifications & Status Bar - Lock Screen Notifications, turn on "Show Lock Screen Notifications", then turn on "Screen Alert When Lock Screen Notifications are Received", click the required software, and set it to display Lock Screen Notifications.

IQOO UI, and FunTouch OS versions: Go to Settings - Notifications & Status Bar Status Bar & Notifications - Turn on "Show Lock Screen Notifications or Show on Lock Screen" - Turn on "Alert or Alert When Lock Screen Notification Received", then go to "Manage Notifications" - Find the software needed - Turn on "Show Lock Screen Notifications on Lock Screen".

FunTouch OS: Please go to [Settings - Notifications & Status Bar - Turn on Alerts & Show on Lock Screen], then go to [Settings - Status Bar & Notifications - Manage Notifications - Find the Corresponding Software - Turn on Show on Lock Screen Switch], and the screen will turn on normally after the message comes.

FunTouch OS: Please go to [Settings - Notifications & Status Bar - Turn on the screen when you lock the screen notification] to turn on this switch. Then go to [Settings-Status Bar and Notifications-Find the corresponding software-Turn on the lock screen display switch], and then the screen can be turned on normally after the message comes.

FunTouch OS Previous: The phone does not support third-party software to turn on the screen when a message comes in.

If you are using a vivo phone, you can set the screen to turn on the message as follows:

OriginOS 3, OriginOS Ocean, and OriginOS: Go to Settings > Notifications & Status Bar > Lock Screen Notifications, turn on "Show Lock Screen Notifications", then turn on "Alert when you receive a Lock Screen Notification", click the required software, and set it to display Lock Screen Notifications.

IQOO UI, and FunTouch OS versions: Go to Settings - Notifications & Status Bar Status Bar & Notifications - Turn on "Show Lock Screen Notifications or Show on Lock Screen" - Turn on "Alert or Alert When Lock Screen Notification Received", then go to "Manage Notifications" - Find the software needed - Turn on "Show Lock Screen Notifications on Lock Screen".

FunTouch OS: Please go to [Settings - Notifications & Status Bar - Turn on Alerts & Show on Lock Screen], then go to [Settings - Status Bar & Notifications - Manage Notifications - Find the Corresponding Software - Turn on Show Calendar Switch on Lock Screen], and the screen will turn on normally after the message comes.

FunTouch OS: Please go to [Settings - Notifications & Status Bar - Turn on the screen when you lock the screen notification] to turn on this limb switch. Then enter [Settings-Status Bar and Notifications-Find the corresponding software-Turn on the lock screen display switch] and then turn on the screen normally after the message comes.

FunTouch OS Previous: The phone does not support third-party software to turn on the screen when a message comes in.