The old house is ready to be renovated with a wall toilet, is the wall toilet good?

I believe that many people have never seen a wall row toilet. The design of this toilet is a little different from the ordinary one. We can't see the back of the toilet, and there is also a difference in the way Chu Duo experiences it naturally.

Wall toilets can be divided into wall-hung toilets and ordinary side-row toilets in appearance. Most customers choose the former because regular side-row toilets are not as practical as floor-standing toilets.

The wall-mounted bathroom design can hide ugly drains, toilet tanks, etc. on the wall, making the bathroom very delicate and concise. It can be divided into wall-hung toilets and side-row toilets, but most consumers will choose wall-hung toilets because side-mounted toilets are not as practical as floor-row toilets. The design of the wall toilet can hide ugly things such as toilet tanks and drains on the wall, making the whole toilet look more delicate and concise, with more space.

The water tank of the wall row toilet is hidden in the wall. With barriers, the noise during the flushing process is significantly reduced.

The convenience of moving a wall-mounted toilet is not as complex as that of a regular floor-mounted toilet. A lifter should be used, which can even nourish the entire spatial layout of the restroom. The wall-mounted toilet is wall-mounted, which saves space and occupies a small area, making the whole bathroom look more open.

People who are addicted to cleaning are suitable to buy a wall toilet because it has no hygienic dead spots at a 360° angle and is easier to clean, which is in line with your cleaning personality. After securing the toilet to the wall, the last step is to secure the toilet to the wall. Then, if you want to fix the toilet to the wall, you have to fix it.

The ground toilet was changed to wall drainage, and the original sewage pipe was changed to special pipe fittings for compulsory drainage. One of the advantages is that the position of the toilet can be changed within a certain range. There is no need to install the toilet in the drainage location reserved by the original developer, adding value to the layout design of the entire restroom.

More options have been added. If the toilet is not a sunken toilet and the underfloor heating is embedded in the toilet, in this case, care should be taken to prevent damage to the underground underfloor heating fittings when replacing the sewage pipe.

There are pros and cons, you need to consider yourself, the advantage is beautiful, good cleaning, the disadvantages are not easy to repair, if there is a problem to smash the wall. Personally, I still like not to be afraid of trouble in the later stage, of course, the current things should not be easily broken.

The wall row toilet is good. Because it is very convenient to use, and then it can also meet the needs of the home, and it is also very convenient to clean. It is prone to clogging.

I don't think the wall toilet is particularly good because it is particularly troublesome to install and it is not easy to clean. You can settle that kind of squatting pit.

If the wall toilet is broken, do you need to dismantle the wall and repair it, you don't need to use the wall-hung toilet, it generally needs to be professionally installed, and the product itself will generally not be broken, even if the individual accessories are broken, you can replace the accessories, and you don't need to remove the false wall to change the water tank. However, the premise is that the installation is professional, the installation cost of the wall-mounted toilet is relatively high, the general brand, the installation cost includes changing the pipe, and the worker charges 400-600 yuan. In addition, try to choose well-known brands, so that the quality and after-sales are more guaranteed.

The wall-hung toilet is easy to change the position of the toilet, so that the bathroom space can make full use of the virtual friend. If you don't need to change the location of the toilet, it is recommended not to choose a wall-mounted toilet, after all, the wall-mounted toilet plus the installation fee is higher than that of an ordinary toilet, which is basically equivalent to a smart toilet of the same brand. Hope it helps.

Hello dear; I'm glad to be able to answer for you The toilet that has been renovated is changed to the wall row: yes, but the wall row needs to build an extra fake wall, which cannot be directly embedded in the wall. In principle, it is possible to directly embed the wall, but the wall will cause damage and harm to the wall itself, the lines in the wall and the water pipes.

Generally, when installing a wall toilet, it will not be directly embedded in the wall, but will be installed by building a false wall. In addition, the biggest use of building false walls is for the load-bearing of the toilet! We all know that the wall toilet is fixed and guaranteed to bear the load through the toilet bracket, if it is directly embedded in the wall, the bracket can not ensure the stability, so that there will be potential safety hazards in the later use, the hall Xiang bracket is buried in the false wall, the stability of the wall toilet will be more ***.

The wall toilet is the same as the ordinary toilet, there are water tanks and sewer pipes, and the water tank of the ordinary floor horse guess stove bucket is exposed to the outside and is ugly, which affects the overall decoration grade, with this fake wall, we can bury the water tank and sewer pipe into the fake wall in advance, so that it looks more designed and aesthetic, and the sound of the water tank buried in the false wall will be blocked by the wall when flushing, which has a noise reduction effect.

Under normal circumstances, the renovated room can be reed to install a toilet. But there are a few things to consider:

Space constraints: Determine if there is enough space in the room to accommodate the toilet and ensure that it can be used properly after installation, including standing and sitting space.

Construction and installation: Installing a toilet requires water and electricity renovation and related construction work, including water sources**, drainage pipe diversions, fixtures, etc. It is advisable to seek professional plumber workers for construction and installation to ensure quality and safety.

1. The difference between wall toilet and floor toilet:

The biggest difference between the two is that the installation of drainage pipes and water tanks is different, and the wall toilet is also called a wall-hung toilet, which is directly hung on the wall space, which makes reasonable use of the space on the wall, occupies a small area, and saves the space of the bathroom. The floor toilet is a traditional toilet directly placed on the ground, the floor drainage toilet, the hole spacing is 20cm, 30cm, 40cm pit spacing, no need to pre-embed the water tank, etc., as long as the distance from the center of the sewer to the finished wall after the tile is one of the above 3.

2. Why do wall toilets slowly replace floor toilets:

The wall toilet is to move the pipe of the bathroom to the wall, and there will be a pre-water tank when purchasing the wall toilet, which is first pre-buried, and then the ceramic parts are installed after the tiles are pasted.

It also makes sense that wall toilets are becoming more and more popular among modern young white-collar workers, and they have the following advantages:

1. The floor area is relatively small, and the parts such as the toilet and water tank that occupy the space are hidden on the wall, which is very clean and tidy, giving people a sense of fashion and delicacy.

2. The noise is low, because the water tank is installed in the wall to block the noise when flushing.

3. It is more convenient to clean, and it is the first choice for people who are obsessed with cleanliness, and it can be cleaned in place 360 degrees without dead ends.

4. It is convenient to move, and it can be completed without using a shifter, which is much more convenient than a floor-standing toilet.

But there are also some unavoidable shortcomings: it is very inconvenient to repair problems in the later stage, the wall must be chiseled, and the gravity is much smaller than that of the floor toilet.

As a toilet, of course, its job is to maintain a clean function, and at present, "environmental protection" has become an imminent problem in the upgrading of household products. As the bathroom with the most waste of water in the family, the toilet is one of the "big water users", taking a family of three as an example, the average person uses the flush toilet three times a day, and about 45 liters of water are flushed away every day, and about 10,000 liters of water are consumed a year. With such a large amount of water consumption, don't you really consider buying a toilet that is truly water-saving?

Strengthening the concept of environmental protection, water conservation and energy conservation should not just stop at shouting slogans, but should be implemented in every small part of life. State agencies such as the Ministry of Water Resources and the General Administration of Quality Supervision, Inspection and Quarantine are also trying to guide consumers to buy high-efficiency water-saving products through various effective ways to enhance the awareness of water conservation among the whole people.

Speaking of which, by the way, I will do a popular science on the level of water conservation. Level 1 water efficiency level means the average water consumption, and the water consumption of the double-flush toilet is fully flushed; Level 2 water efficiency level means average water consumption, and the water consumption of the dual-flush toilet is fully flushed. In other words, a toilet with a grade 1 water efficiency label can save about 1 liter per flush compared to a toilet with a level 2 water efficiency.

When it comes to half-punch and double-punch, do you know who its inventor is? That's right, it's from the European first-line bathroom brand - Ojet! Having opened a new chapter in global water habits and helped users around the world save 50% of water, Odjet has always been an expert in efficient water conservation.

One of the outstanding advantages of a variety of classic bathroom toilets such as Zhifang, Zhiyuan, and Zhixin launched by Oujiet is that they use less water to achieve more efficient cleaning results. At the same time, the Oujiete hidden water tank adopts a multi-level adjustable personalized flushing design, which is preset to 3 6L at the factory, and can be adjusted to 2 4L according to demand, which has reached the national first-class equivalent standard.

In addition, the water-saving ability of the Odjet wall toilet is also reflected in another aspect - the inlet valve. Many people know that the water consumption of the toilet is directly related to the water parts, and Ojet spent a lot of manpower and time to develop AZOR

PLUS delayed water inlet valve is an international patented technology, breaking the drawbacks of the traditional water inlet valve while draining the water inlet, and then entering the water after the water tank is emptied, so that each flush can save at least 9 liters of water per day, and truly implement the global policy of energy conservation and environmental protection.

1. Its own characteristics.

The choice of wall toilet is divided into wall-mounted toilet and ordinary side-row toilet from the appearance, and most customers choose the former, because the practicality of ordinary side-row toilet is not as good as that of the floor toilet. The wall toilet design can hide unsightly drainage pipes, toilet tanks, etc. in the wall, making the bathroom very delicate and simple.

2. Advantages.

Low noise: Because the water tank of the wall toilet is installed in the wall, there is a wall barrier, and the sound is naturally much smaller when flushing.

Convenient toilet shifting: The displacement of the wall toilet is much more convenient than that of the ordinary floor toilet shift, and it does not affect the layout of the bathroom space.

Small footprint: The wall-mounted wall-mounted toilet adopts the wall-mounted installation method, which occupies a small area and has a more open space.

Easy to clean: The wall-mounted wall toilet is easy to clean without hygienic dead corners, which is very in line with your personality who loves to clean.

3. Disadvantages. It was very inconvenient to repair, and sometimes the wall had to be chiseled open.

The gravitational force is less than that of a floor toilet.

Internal parts break down quickly. Is the wall toilet good Wall toilet ** Is the wall toilet good Wall toilet **.

4. Precautions.

Many consumers are worried about whether the wall-mounted wall-mounted toilet will collapse, and it is normal to have such questions when looking at the installation method of the wall-mounted wall-mounted toilet. In fact, the load-bearing is not the wall-mounted wall toilet, not the wall, not the water tank, but the bracket in the wall. It has been proven by the technical center that it can withstand 400 kg of gravity, so there is no need to worry about the toilet collapsing.

Because the water tank of the wall-mounted wall toilet is hidden in the wall, the material, process and internal water parts of the tank are more important. Whether it is HDPE or whether it is one-time blow molding, this directly determines the service life of the water tank. The water tank with inadequate technology will easily leak, and the inlet and drain valves in it also need to be high-quality verified, otherwise the hidden water tank will become a hidden trouble.

The choice of concealed water tank must consider whether the manufacturer is professional and has been verified by the public.

Wall toilet You are talking about a wall-mounted toilet or a floor-to-ceiling wall toilet! These two are different! The wall-mounted toilet is more space-saving, generally a direct flush type, and is more practical for guest or secondary bathrooms, not suitable for internal guards! Because of the loud flushing sound, the floor toilet is suitable for a wide range.

The wall toilet is still very good, first of all, it is space-saving, the bathroom is small, so it is more economical, and it is also the place I like, but it is recommended that you must use the toilet and pipe, so that it is not easy to have problems, and the wall toilet is more troublesome than the ordinary toilet after the problem.

1. Wooden planks are definitely not recommended. And the practical use of the board wall is not a wooden board, but a calcium silicate board.

2. Even so, the problem of waterproofing should be considered, because the calcium board itself is not waterproof, and the board surface should also be waterproofed.

3. There is also a problem that the board wall is hollow, basically not soundproof, as soon as someone uses the toilet, the other side must be able to hear, this problem is not much even if the sound-absorbing cotton is placed in the board.

It is very recommended that you pack a water tank, which is not conducive to maintenance.

If you insist, take a picture of ** to give you a specific plan.

First of all, it is waterproof, and secondly, it is necessary to coordinate.

First, the installation method of the wall toilet.

1.First of all, according to the layout of the bathroom at home, determine the installation location of the wall toilet, and then get the drain pipe. The installation process of the entire concealed tank is relatively simple, and the whole process takes about 6 hours.

2.It is operated by professional and technical personnel, and the cost is not expensive, less than 400 yuan. The installation service is door-to-door and includes three times:

The first time to see that the installation conditions of the bathroom do not meet, if they do, find the location of the blow molding water pipe installation, and explain how to arrange the pipe; The second visit is to deliver the water tank and install the sewer pipe; The third time is to install the wall-mounted toilet when the overall decoration is almost completed.

Second, the installation steps of the wall toilet.

1.Adjust the height of the water tank.

Side-press water tank: according to the thickness of the decorative layer xcm, the horizontal line from the upper part of the white box diagram to the bottom of the bracket adjustable foot is 2500px+xcm.

Top press water tank: according to the thickness of the decorative layer xcm, the adjustable foot from the top of the bracket to the bottom of the bracket is 2050px+xcm. The bracket adjustment leg is only allowed to be adjusted up to 500px without being particularly lengthened.

2.Set the screws.

The installation of the water tank bracket is mainly fixed by 4 screws, two on the upper part of the bracket and two on the support feet; At the same time, all screws on the water tank bracket must be tightened. When installing, it is necessary to ensure that the surface of the water tank bracket is horizontal and the façade is vertical.

3.Water supply pipe connection.

The water inlet of the water tank should be connected with the water supply pipe (hard pipe) of the water tank and the water inlet angle valve.

It is strictly forbidden to install the angle valve in the water tank outside the box, so as not to cause the water tank to be unable to open and close the angle valve during cleaning and maintenance. It is strictly forbidden to connect the water supply pipe and the water tank angle valve with a hose, the pipe pressure and the quality of the hose may cause leakage, and in case of leakage, the false wall needs to be destroyed to repair.

4.Drain installation.

If a concealed water tank is installed in the original pit, the short pipe connecting the water tank and the drainage pipe must be larger than 90 to prevent blockage.

5.Protective device installation.

All protective devices should be installed before the false wall is made and the decorative layer is installed.

6.Acoustic pad installation.

The fake wall is decorated and tiled. Then attach the soundproof mat to the decorative wall. Cut off any excess acoustic pads after installation.