The computer can t be turned on, and when it is turned on, it always shows Startup Repair cannot au

Hello! Workaround:

Press F8 immediately after booting to the advanced option appears in the let go, select "The latest correct configuration" Enter to repair, and press F8 to enter the safe mode to restore the system or reinstall the system.

First soft and then hard, such problems are caused by software conflicts, inappropriate drivers, and system problems, you can restore the system in safe mode, or not reinstall the operating system, do not install software, patches, drivers, etc., and see if there is still a problem with booting? If you don't install drivers, patches, and software step by step, and find something that isn't suitable, don't install it.

If there is a hardware, take out the motherboard battery and put it on the charge, plug and unplug the memory, clean the graphics card, check whether there is a problem with the hard disk, and if it doesn't work, just overhaul it.

If this is always the case, first soft and then hard, reinstall the operating system, do not install software, patches, drivers, etc., and see if there is still a problem with booting? If you don't install drivers, patches, and software step by step, and find something that isn't suitable, don't install it.

Please note: If you restore the system or reinstall it, when installing drivers, patches, software and other things, be sure not to install the things that affect your accident this time, otherwise it will be restored or reinstalled in vain.

In terms of hardware, such as hard disk, memory, etc., whether there is a problem, whether the temperature of the CPU and other hardware is high, if it is caused by hardware problems, it is recommended to take it to a repair shop for maintenance.

Press F8 to try the last correct configuration start, if it doesn't work, redo the system.

When the computer prompts that AutoRepair cannot repair the computer, you can try to restart the computer, enter safe mode, reset the computer, etc., as follows:

1. Restart your computer.

Generally, this problem may be caused by an abnormal shutdown. You can first try the [Restart] option in the automatic repair interface to restart the computer. If you are still stuck in the auto-repair interface, proceed to the next step.

2. Try to enter safe mode.

"Advanced Options" in the "Auto-Repair" interface goes into safe mode. If you can enter safe mode, please uninstall the newly installed new patch in safe mode, and then restart the computer again to see if you can enter the system interface normally. If you can't enter the safe mode, you still can't enter the win10 system interface normally.

Try the next step next.

3. Reset this computer.

In this case, select "Advanced Options", then "Troubleshoot" and "Reset this computer" and follow the steps, resetting this computer will erase all files.

Precautions for the usual use of the computer:

1. Turn on peripherals, such as monitors, speakers, printers, scanners, etc., in a strict boot order, and then turn on the power of the host. Power off the console before turning off external devices.

2. Frequent switching on and off will damage the life of the computer. Long-term driving accelerates the aging of computers. When not in use, use a screensaver, wait for the machine, or hibernate.

10 hours of continuous use. It's best to turn it off for 10-20 minutes before turning it on. Don't play with the computer all night, it's not good for the life of the computer, and it's also harmful to the body.

Hello, I'm glad to answer for you, the computer can not be repaired when the computer starts automatic repair, this can be operated using the system disk, or open the BIOS. The specific process is as follows: First, press F8 to power on and then let go of the advanced options.

Second, select the most recent correct configuration and press enter to fix it. Thirdly, press 8 to enter the safe mode at boot and restore the system that comes with the system. Fourth, using System Disk Repair, open the Command Prompt and enter SFC Scannow.

Fifth, insert the original system disk to repair the system, and the system will automatically compare the repaired one. Sixth, if the fault persists, set the optical drive in the BIOS as the first boot device. Seventh, insert the system installation disk, press R to select the repair installation.

Eighth, if the fault persists, it is recommended to reinstall the operating system.

What is the reason why your computer does not boot up properly when the computer is turned on and shows automatic repair?

Jianghu Baixiao will answer for you: specific methods: 1. This should be because the system is still unstable, click on the advanced settings first.

2. After entering the advanced settings, you can see that there are 6 options here. Basically, there is no way to solve the problem by clicking to start the repair, but it is recommended to give it a try first. If not, follow my steps.

Tap on the System Restore option. 3. Then you can see that there are 2 options here. The first is incomplete clearance, and the second is complete clearance.

If you have important documents, it is recommended to choose the first option. In this case, the computer's files will still be stored in the computer, and the second option is selected here. 4. You can see that it is the deletion of the driver, here you can choose to clear all files and clear all the drivers, because it may be caused by the driver and the system not very well.

5. Then select the option to clean the drive completely. The instructions above indicate that these files can be recovered after deletion, but it is more troublesome. 6. Finally, click Initialize, and the computer will restart after completion.

Then correspond to the required documents in ** yourself. 7. The problem that may occur in the above methods is that the initialization is not successful, how to solve this kind of problem, one is to reinstall the system, and the other is to select the startup settings in the advanced options. 8. Then it is to choose the original system.

Because after upgrading win10, you can also choose the original system, but you will find that after choosing the original system, you will find that the system you enter is still win10 when you restart the computer. In this way, you can continue to use the win10 system model to accompany the Huai system.

1. The computer mistakenly deletes or destroys the system files.

Then the system needs to be reinstalled.

2. It may be caused by the compatibility conflict between the installed software or plug-ins and the system.

You can force shut down 3 times, and then restart the computer and the recovery interface will appear—select "Advanced Recovery Options"—then select "Incurable Disease"—then select "Advanced Options"—click Startup Settings—and then the computer will reboot into safe mode, and after entering safe mode, open apps and functions, and delete the recently installed software or plug-ins.

3. It may be that the system suffers from malware or computer virus, and the virus causes the system to malfunction.

Force shutdown 3 times, then restart the computer will appear recovery interface - the interface will appear to select "Advanced Recovery Options" - then select "Incurable Diseases" - then select "Advanced Options" - click on Startup Settings - then the computer will reboot into safe mode, after entering safe mode, use security software for antivirus.

4. It may be a disk problem. You need to check the disk, and if there is a problem with the hard disk, you can replace it with a hard disk.

Try the following:

1. Enter Windows RE recovery mode.

If you boot three times abnormally, you can enter Windows RE recovery mode. Here's how:

Press and hold the power button for 10 seconds to turn off the device.

Press the power button again to turn on the device.

As soon as you see Windows boot (the ASUS logo appears when it restarts), immediately press and hold the power button for 10 seconds to turn off the device.

Press the power button again to turn on the device.

While Windows restarts, press and hold the power button for 10 seconds on your device.

Press the power button again to turn on the device.

Let the device reboot completely to enter WinRe.

2. From the selection options, click Troubleshoot.

3. Select Advanced Options, and then select Auto-Repair.

Please click Enter a description.

What should I do if the computer does not start properly and cannot be automatically recovered1Method 1 The computer does not start correctly, and the automatic recovery can not be generally caused by the improper operation of the last shutdown, or the recent update of the computer is caused by the patch, and it needs to be restarted several times, if it has not been solved 1, in the restart interface, select Troubleshooting 2, click Uninstall to preview the update 3, and finally click Uninstall to solve the problem 2Method.

2. Check whether your monitor cable is connected to the graphics card. 3.Method.

3. If the problem of the machine is still after operating according to the above method, it may be caused by a problem with the system, it is recommended to save important files, press F9 when restarting the machine, and restore the operating system of the machine to see if it can solve the problem. Related tutorials.

Hello, it's a pleasure to serve you, I hope my answer can help you, I hope I like it, please end the service automatically, thank you Hello, I'm happy to serve you, I hope my answer can help you, I hope I like it, please end the service automatically, thank you

Hello, you can try the following methods:1Enter Windows RE recovery mode.

If you boot three times abnormally, you can enter Windows RE recovery mode. Here's how: Press and hold the power button for 10 seconds to turn off the device.

Press the power button again to turn on the device. As soon as you see Windows boot (the ASUS logo appears when it restarts), immediately press and hold the power button for 10 seconds to turn off the device. Press the power button again to turn on the device.

While Windows restarts, press and hold the power button for 10 seconds on your device. Press the power button again to turn on the device. Let the device reboot completely to enter the From the selection option, tap on Troubleshoot.

3. Select Advanced Options, and then select Auto-Repair.

If it doesn't work, you can only reset the computer.

Questions. Reset the inside of the computer.

Lots of information and blueprints.

It's all gone. [tears].

Click "Reset this computer" and you can choose "Keep my files" or "Erase everything".

You see if you can lose your data by keeping your files, and if you do, you can only go to a computer store and ask a professional to get it for you.

If there are important files in the computer, it is recommended that you do not get them by yourself, otherwise it will lead to data loss and it will be difficult to retrieve them.

Questions. I can't lose a lot of my homework blueprints.

Thank you, I'll go to the shop for repairs now.

You must make it clear to the repairer that the data must not be lost, and some staff members do not make it clear that it will be very troublesome if you lose your data.

The software is missing or the system settings have been changed.

Summary. 1. After the computer is turned on, click the F8 button frantically to enter the operation interface of the system, select the safe mode, and click all the programs under the start after entering;

2. Click on the Control Panel under All Programs, click on System Restore under the Recover button after entering, and select "Restore my computer to an earlier time" under the pop-up dialog box, so that the computer will be repaired successfully.

Unable to automatically fix the reason:

Check the hardware reasons: computer black screen is a phenomenon that is relatively easy to occur, especially in some older computers or assembled computers, there are many reasons for the failure of computer black screen;

Software reasons: 1. There is a virus Trojan, it is recommended to carry out a full antivirus, or to have a look at the antivirus in safe mode;

2. It may be a system failure, it is recommended to upgrade or reinstall the system to try;

3. The system is not compatible, for example, the computer is XP, and it is replaced with Win7.

The computer cannot be repaired automatically, and the computer starts repairing.

Hello, we have received your question and are working hard to prepare the answer for you, and will reply to you within five minutes! Wait a moment! ^

1.When the computer is turned on, enter the safe mode first, that is, press F8 when it is turned on, and then let go when the advanced options appear, and select "The latest correct configuration" Enter to repair. 2.

After entering safe mode, we can use the system restore that comes with the system to restore the system to the time when you last made a normal backup. 3.If this does not solve the problem, use the system disk to repair, open the command prompt and enter sfc scannow enter (there is a space between sfc and ), insert the original system disk to repair the system, and the system will automatically compare the repaired.

4.Or set the optical drive in the BIOS as the first boot device, insert it into the system installation disk, press the R button, and select "Repair Installation".

1. After the computer is turned on, click the F8 button frantically to enter the operation interface of the system, select the safe mode, and click all the programs under the start after entering; 2. Click on the Control Panel under All Programs, click on System Restore under the Recover button after entering, and select "Restore my computer to an earlier time" under the pop-up dialog box, so that the computer will be repaired successfully. Unable to Fix Cause Automatically: Check the Hardware Cause:

The black screen of the computer is a phenomenon that is relatively easy to appear, especially in some older computers or assembled computers, there are many reasons for the failure of the computer black screen; Software reasons: 1. There is a virus Trojan, it is recommended to carry out a full antivirus, or to have a look at the antivirus in safe mode; 2. It may be a system failure, it is recommended to upgrade or reinstall the system to try; 3. The system is not compatible, for example, the computer is XP, and it is replaced with Win7.