7 shaped range hood urban single motor

The 7-shaped range hood refers to the smoke machine that integrates the two elements of top suction and side suction, the effect is OK, the experience is not as good as the side suction top suction, the appearance is still very good, and it is not so practical to look good.

The figure 7 is tall and easy to meet, the technical requirements are higher, the fumes of this shape are first taken away by the side of the suction outlet, and the suction can not be taken away by the top suction to take away, but the actual bottom of the suction outlet is very weak, the double suction outlet will reduce the negative pressure, and the use will be greatly discounted, which is estimated to be the reason why the big brand does not do it

Basically, it's a single motor.

a) Advantages. 1. From the point of view of appearance design, the 7-shaped range hood does not have the problem of meeting like the top suction range hood, and the experience is better for tall users

The zigzag range hood solves the problem that the side draft range hood cannot place large pots and pans, and provides the cook with more freedom of cooking options

3. From the aspect of range hood, when the figure 7 range hood is started, the smoke generated when cooking will be taken away by the side air intake first, and the smoke that is not taken away will be taken away by the range hood on the top surface, and the oil smoke will be attacked up and down, so that the oil smoke has nowhere to escape. So the range hood is very good in terms of functionality.

2) How high is the 7-shaped range hood installed from the stove?

The figure-7 hood is installed between 65 and 75 cm from the cooktop. The range hood needs to be installed above the gas stove and the distance between the bottom of the range hood and the gas stove should be between 65 and 75 cm, and the range hood should not be too close to the window, otherwise the air flow will affect the smoking effect, and the air outlet pipe of the range hood should be controlled within 2 meters, and too many bends should not be designed. Note that the levelness of the hood must be maintained when installing the hood, if there is an inclination, it will affect the flow of the oil circuit in the machine, and oil leakage may occur.

Hello, I am happy to serve you and give you the following answers: The figure 7 range hood motor is located at the bottom of the range hood, which is mainly responsible for the exhaust function of the range hood. If the range hood motor fails, the following solutions can be taken:

1.Check whether the old power supply of the range hood motor is normal, if not, you can check whether the plug is in good contact, or replace the new plug. 2.

Check whether the wiring of the range hood motor is correct, if not, you can rewire it according to the instructions of the range hood. 3.Check whether the pulley of the range hood motor is damaged, if it is damaged, you can replace it with a new pulley.

4.Check whether the capacitor of the range hood motor is damaged, if it is damaged, you can replace it with a new one. Personal Tips:

When checking the range hood motor, pay attention to the safety of the blue pin key and do not touch the power supply to avoid electric shock. In addition, when replacing the range hood motor, it is necessary to choose the appropriate model so as not to affect the normal use of the range hood.

Hello, I am happy to serve you and give you the following answers: the 7-shaped range hood motor is located at the bottom of the range hood, which is mainly responsible for the exhaust function of the range hood. If the motor fails, the following steps can be taken to resolve it:

1.Check the motor for signs of burnout, and if there is, you need to replace it with a new one. 2.

Check that the motor is wired correctly, if not, you need to rewire. 3.Check whether the power supply of the motor is normal, if not, you need to check whether the fibrillation early source line has an open circuit or short circuit.

4.Check whether the controller of the motor is normal, if not, you need to replace the controller with a new one. Personal Tips:

When inspecting the range hood motor, carefully check the Qingque power cord, wiring, and controller to ensure that the motor can work properly. In addition, if the motor is found to have traces of burnout, it should be replaced with a new motor in time to avoid greater losses.