The iron pipe of the household smokeless wood stove is burned red, what should I do?

If the "red flame" shown in the figure below often appears when using the gas stove, you need to pay special attention, because this "red flame" is the result of insufficient combustion of natural gas, which not only consumes oil, but also does not cook well, making the bottom of the pot black; Over a long period of time, it produces carbon monoxide.

and sulfur dioxide and other harmful gases, which can easily poison people.

Many users don't understand or pay attention to security risks.

And buried hidden dangers, I don't know if you noticed when you cooked, when the gas stove at home burns normally, the color of the flame is light blue.

If you look closely, the height and size of each small flame is consistent, showing a cone.

The internal and external flames are clearly visible, and at this time, the natural gas burns most fully and the calorific value is generated.

The highest, the most natural gas saved.

At the same time, and more importantly, this combustion produces the least harmful components in the flue gas and is also the most environmentally friendly. The normal combustion state of the gas stove is a pure blue flame, but in life, it is often found that when the gas stove is in use, the flame appears yellow flame, red flame and other abnormal phenomena.

Because the furnace can continue to work at this time, it cannot immediately attract our attention and will be used often, you know, yellow fire and red fire indicate that the gas is not burning sufficiently, which will produce harmful gases, seriously endanger human health, and bring unexpected safety hazards! During use, if the operation is not good, there will be a flashback phenomenon, which may lead to damage to the gas stove, or even **.

Solution: Turn off the gas switch immediately.

Due to the pressure of the pot, the burner temperature is too high, resulting in tempering. Try to put the pot up; If the nozzle is clogged, the airflow is reduced, resulting in tempering, clean the nozzle; If the fire hole is backfilled due to the influence of wind direction, a windproof ring should be installed. If you can't catch fire several times in a row, you should stop for a while and make sure the gas has dissipated before starting again.

Due to the multiple releases of the gas, it is extremely flammable and explosive in the case of an open flame.

Solution: The main air supply valve is not opened; The fire hole at the outlet of the ignition needle is blocked; clogged nozzles; If the liquefied gas leaks, the pressure reducing valve.

may be damaged; Ignition needle offset.

You can slowly take out the fire in the wood stove and let it go out slowly, at this time, don't touch the iron pipe, and don't go to cool him down at will, let him cool down naturally.

I think the best thing to do is to add less coal, so that the iron pipe will not burn red if the temperature is not enough.

I think the best thing to do is to leave it alone, because this situation means that the furnace is in the right structure and has good ventilation, which is why it will burn red.