What tools are good for unclogging pipes at home?

If the blockage is not severe, baking soda can be used. Pour some baking soda and vinegar into the pipe, and the blockage will be softened by the neutralizing reaction of baking soda and vinegar. You can also find a wooden stick that is slightly thinner than the water pipe, and then put some water, and quickly use the wooden stick to make a piston movement, so that the use of water sealing, pressure will be generated, and the blockage will be washed away.

Find a water pipe that is a little smaller than the diameter of the water pipe, then put a section of the water pipe tightly on the faucet, and then put the other end of the water pipe directly to the place where the water pipe is blocked, find some cloth to surround the water edge, and then open the faucet to the maximum, the general water pressure can take away the blockage of the sewer directly, but this can only be successful if your blockage is not very large, if the blockage is too large, it is useless.

Pipe blockage in the kitchen is generally caused by the accumulation of food residues and oil stains, so it is a wiser choice to choose high-temperature plugging. First pour some laundry detergent into the drain and then pour hot water, which will not only dilute the dirt in the drain, but also clean the oil stains on the inner wall by the way, and the blockage in the drain will also be dredged.

Clogged plumbing in the bathroom is generally caused by hair. You can use a hand-cranked spiral wire to push down from the floor drain until the hand-cranked has a foreign body sensation, and then gently pull it out while shaking, and the clogged hair and other dirt will spin on the spiral wire. It is also possible to put caustic soda into the mouth of the sewer and pour boiling water into it.

If you can't solve the problem, you can use a steel cable, you can take a look at the Ridge brand of pipe blockage dredging tools, with their own patented technology, such as what feed control technology, automatic steel cable feed function, etc., girls can use their tools to clear the sewer by themselves without any effort, and there will be no cross-flow of sewage.

The best ways to unblock pipes are as follows:

1. Water pressure dredging method. If it is caused by some relatively small items, it can be caused by the impact of water.

Settle. Plug the other drains first, then find a water pipe to connect the faucet to the pipe opening. Next, turn on the faucet and adjust the amount of water to the maximum, so that you can keep flushing.

2. Acid-base reaction method. If the blockage is too serious to solve, you can buy some vinegar and baking soda.

Mix the two in a two-to-one ratio and stir thoroughly. Next, add an appropriate amount of water and stir it again and pour it into the pipe, let it stand for a period of time to allow the blockage to fully dissolve, and finally rinse it with water.

3. Wire dredging method. If the pipes are clogged due to hair build-up, this works very well. All we need to do is find a wire, fold it into the shape of a hook, and then slowly reach the wire into the pipe to hook out the debris.

If you don't have wires at home, you can also replace them with long strips.

4. Pipeline dredging agent. If it is caused by grease, vegetable residue, paper scraps and hair, it can be dredged in this way, and at the same time, it can also solve the problem of pipe odor, and has the ability to kill bacteria and parasites.

and other effects.

1. Water pressure dredging

Pipeline blockage can be dealt with by the method of water pressure dredging, which first needs to block the other outlets of the pipeline to avoid air pressure leakage, and then align the water pipe with the blocked pipe, open the maximum flow of water, and impact the foreign matter in the pipeline until the foreign matter is removed and the pipeline is dredged.

2. Acid and alkali dredging

The acid-base reaction can be used to unclog pipes. Pour an appropriate amount of vinegar and baking soda into the blocked pipeline, the two will have a neutralization reaction, generate a large amount of gas, and have the effect of removing foreign matter, and the acid and alkali will also have a corrosive effect on the foreign matter blocking the pipeline, which is conducive to dredging the pipeline.

3. Wire dredging

Pipe blockages can be dealt with by wire dredging. It is necessary to prepare a long and flexible iron wire, the head of the iron wire is bent into a hook shape, and the iron wire is stretched into it along the pipe, and the debris in it is hooked out by the wire to achieve the purpose of dredging the pipe.

Precautions related to pipe dredging

Pipeline dredging agent mainly uses it to have a chemical reaction with the oil in the water pipe to dredge. However, it has a certain corrosive effect on plastic pipes and aluminum pipes, and this type of dredging agent cannot be used. Pour an appropriate amount of pipeline dredging agent, if you add too much, the effect may be counterproductive, and the sewage will solidify and the water pipe will be more blocked.

Hot water and laundry detergent have a good detergent effect on protein dirt and oily dirt. Use a basin of hot water, mix with laundry detergent and stir, then pour it into the drain, soak for dozens of minutes, and then dredge the drain.

Hot water and caustic soda both have a certain corrosive strong alkali, and general detergent products will contain caustic soda. When caustic soda is dissolved in water, it generates a large amount of heat, which is used to dissolve sewer blockages. But he, like the pipe dredging agent, cannot be used for plastic pipes and aluminum pipes, and has a certain corrosiveness.

1. If we have the problem of pipeline blockage, there are still many ways to dredge it, you can use a dredge device to dredge, this dredge is equivalent to a curved steel wire, we will stretch the bent steel wire into the pipeline, and then hold the handle and keep rotating until the hand feels slightly heavy, hold the handle and lift it up, you can clean up all the stains in the pipe.

2. If the sewer pipe is blocked, we can also see if the pipe can be unscrewed, if it can be unscrewed, we can directly unscrew the pipe, wash it with dish soap and brush, and all the dirt and oil in our home can be washed out.

3. If there is a blockage problem, we can also use vinegar and baking soda to pour into the pipe, which can not only help us remove the grease in the pipe, but also help us soften some dirt in the pipe, and we can help us dredge the pipe by pouring it in with water after about half an hour.

4. You can also use caustic soda to pour into the pipeline, but the premise is that if our pipeline is a stainless steel pipe or an advertisement of iron juice, it is recommended not to use a biopsy, because it has a certain corrosiveness, which can help us corrode some foreign bodies in the pipeline, but if it is a pipe of iron juice, it may also corrode the pipeline together.

5. After the pipeline is dredged, if it is due to the aging of the pipeline, then we can also replace the pipeline directly.

Water pressure dredging method:

If it is just a small object caused by a blockage of the toilet drain, it is easy to solve, and the impact of water pressure can be used to flush away the small object and unclog the pipe. It is recommended that you first plug the other gaps in the sewer outlet, then connect the faucet and the sewer outlet together with a pipe, then turn on the faucet and adjust the water volume to the maximum for a few minutes.

The best way to dredge the pipeline blockage: acid-base reaction method.

If the blockage is caused by oil contamination in pipe dredging, you can use 20% sparkling water to dredge it, or you can pour 1 cup of laundry detergent into the clogged sewer pipe, and then pour 3 cups of hot water. If this does not clear the drain, you can pour 1 more cup of vinegar into it. Baking soda and vinegar are more suitable for use in the following situations where the sewer pipe is slightly blocked.

How to Prevent Pipe Clogging:

1. When washing vegetables or dishes in the kitchen, try to clean up the residue blocked by the filter screen as kitchen waste for disposal, and do not forcibly discharge it through the sewer pipe, so as not to deposit in the water trap and cause the pipeline to be blocked.

2. When bathing, do not flush the hair and other debris into the sewer pipe, after entering the pipe, it will net the impurities passing by and cause the flow of water is not smooth, and at the same time, it is necessary to regularly clean the hair in the basin drain filter and floor drain filter, and if not cleaned up in time, it will also aggravate the deposition of residues in the sewage and lead to blockage.

3. Check the pockets of the laundry to avoid coins, keys, buttons and other items from damaging or blocking the drain and sewer pipes of the washing machine.

1. Boiling water.

Before you start raiding the cupboards and plan an all-out assault on your drains, figure out if the blockage is minor. In some cases, plain boiling water is sufficient to clear the blockage. Bring a pot of water to a boil and quickly pour the entire pot into the clogged drain.

For sinks and shower drains, this ultra-low tech approach may be sufficient.

2. Baking soda and vinegar.

Use baking soda and high-strength vinegar to pour an appropriate amount of baking soda into the drain first, and then pour an appropriate amount of high-strength vinegar, and the soda powder and vinegar have a violent chemical reaction to remove grease and other sticky things in the pipes.

3. Dredging agent.

This method is very simple, just pour the dredging liquid into the drain, wait for about an hour, and then rinse with plenty of hot water, if the blockage is more severe, you can repeat it several times.

4. Alkaline tablets. If the pipe is thick and hard, you can use alkali flakes, first pour a large amount of water in the stainless steel basin, and then add an appropriate amount of alkali flakes, fully melt and pour into the drainage pipe. Note that gloves should be worn when operating to avoid corrosion**.

5. Pump.

When the small pipe is blocked, you can plug the hose of the pump into the drain pipe, seal the drain, and then put in enough water to quickly pump air into the sewer, and the pipe can be dredged.

6. Frozen vinegar. Full disclosure: Frozen vinegar lumps don't really go through the hard lumps in the sewer. But if your sink's garbage disposal is backing up, this simple strategy will help sharpen the processing blades and get things moving again.

Freeze the white vinegar in an ice cube tray. Put a handful in the process and turn it on until it runs smoothly.

7. Liquid dish soap.

For greasy clogs, like those that may linger in the pipes of the kitchen sink, dish soap can't be beaten. After all, it's designed to break through the oil. Boil a pot of water and pour in enough dish soap to make the water good and foamy.

Pour the mixture into the drain and follow up with plain boiling water after a few minutes.

8. a wire hanger.

Cut a hanger near the bent hook and straighten the wire as far as possible. Either keep the original hook and compress it inside the drain, or create a new hook at the end of the wire and wrap it around the drain. The hook may be able to pull the blockage up and out.

9. a plunger. When it comes to tough clogs, there's really nothing to replace a humble plunger. The plunger works by creating suction and pressure that forces the water to flow up and down in the pipe. The water that washes through the blockage should loosen and hopefully release it.

Use one (clean!) Plungers on sink or shower drains, and plungers on clogged toilet drains.

Solutions for blocked drains:

Step 1: Plug the drain of the sink, first store the hot water in the upper half of the sink, remember that the temperature must be 50.

Step 2: After the water is stored, pull the water plug (drain cover), pay attention to anti-scalding, more than 50 water, the human body feels very hot.

Step 3: Wait for the hot water to run dry, along with the air current.

Principle: An important reason for a clogged drain pipe is that grease solidifies on the drain pipe.

As far as the sink drain is concerned, the daily food oil stain adheres to the drain pipe, which is the main cause of blockage. In the case of bathrooms and sinks, the oil stains from the food become sebum dirt and attach to the drain pipes.

The hot water will melt the grease on the drain pipe, and the high-pressure air flow will instantly wash away the melted grease, which is why it is necessary to store water or have a large flow of water.

Plumbing is a common problem in households, not only in the kitchen, bathroom, laundry room, etc., but also in the case of leakage at the drain outlet. At this time, it becomes especially important to choose a good pipe dredging tool.

First of all, among the pipe dredging tools, the most common are ventilation pipes and pressurized water pipe dredging tools. The principle used by the ventilation pipe is to rely on the artificial force to generate pressure to bring out the blockage, while the pressurized water silver pipe dredging tool is to wash out the material in the pipe through the high-pressure water flow. In contrast, pressurized water pipe dredging tools are more efficient.

Secondly, buying a pipe dredging device online is also a good option. On online shopping platforms, we can find various types of pipe dredging devices, including high-pressure water guns, hand-cranked pipe dredging devices, etc. Using these tools is not only convenient, but also cheap.

To sum up, we need to buy easy-to-use and efficient plumbing tools to better solve the plumbing problems in the daily life of the family.

Dear We are very happy to answer your <> one-on-one

The best way to unclog <> pipes depends on the cause and extent of the blockage. Here are some common methods of unclogging pipes:1

Use chemical cleaners: Pipe cleaners can be used to dissolve or break down blockages, such as alkaline or acidic cleaners. But be careful to choose a cleaner that is appropriate for your pipe type and blockage, and follow the instructions for safe use of the cleaner.

2.Mechanical unclogging: Mechanical unclogging can be done using tools such as hand-cranked or electric toilet pistons, pipe cuppers, hooks, etc.

This method works well for smaller blockages, but may not be effective enough for larger or more stubborn blockages. 3.High Pressure Water Jet:

The high-pressure water jet washes away the dirt inside the pipe with strong water pressure and is suitable for larger or more stubborn blockages. However, please pay attention to choose the appropriate water pressure and sprinkler head to avoid damage to the pipe. 4.

Disassembling the pipes: If other methods don't solve the problem, you may need to disassemble the pipes and clean them manually. This method is time-consuming and labor-intensive, but can effectively remove any size and type of blockage.

Please note that to avoid clogged pipes, clean them regularly and avoid pouring large pieces of food debris, grease, paper towels, and other debris into the pipes.