If I accidentally buy shoes, is there any way to make them bigger?

Use socks: If you have socks, put them on thick socks, and then put them on and walk around to make them bigger.

Use a hair dryer. Plug in the prepared hair dryer, then aim the hair dryer outlet at the small part of the shoe and blow continuously for about 20 minutes, and then blow again every half hour, at least three times or more. This is based on thermal expansion and contraction.

The principle that the shoes will become larger.

1. Use a hair dryer to blow on the small part of the shoe for 20 minutes, once every half an hour, more than three times. According to the principle of thermal expansion and cold contraction, the shoe will become larger. Then stuff the inside of the shoe, keep it that size, and place or put it on and walk around.

2. Hold the newspaper into a ball, pinch it tightly and dip it in some water, it doesn't need to be too wet, but the whole ball should be stained with water.

3. Then wrap the wet newspaper with a dry newspaper and stuff it into the part of the shoe that squeezes the foot. Seal the shoes in a plastic bag and leave overnight.

4. Mix alcohol and water in a ratio of 1:1, wet the inside of the shoes, and wear the shoes on the feet until the shoes are dry. After the alcohol has dried, the shoes will retain the shape of your feet. Alcohol is more suitable for shoes made of leather and canvas.

5. Fill some water in a sturdy plastic bag.

6. Put it in the shoes so that the water in the bag can hold the shoes up completely.

7. Put the shoes in the refrigerator, freeze them overnight, wait for the water to expand when they freeze into ice, and stretch the shoes up. Just take it out again.

8. Boil a pot of water and wait for the water to boil.

9. Hold your shoes against the steam at the spout of the pot and hold each shoe for 3 5 minutes.

10. Scoop up a shoe pole on the Internet, put the shoe gripper into the shoe, adjust the width and length, and keep it for two days, which can generally be stretched half a yard to one yard.

11. The ultimate trick: send the shoes to the shoe store and ask a professional shoe repair staff to help you grow up.

The remedies for buying small shoes are as follows

1. Blow with a hair dryer. Blow the small part of the shoe with a hair dryer for about 20 minutes, once every half an hour, and blow it more than three times. This is the use of the principle of "thermal expansion and cold contraction" to make the shoe bigger.

2. Stuff newspapers. Crumple the newspaper into a ball, dip it in a little water, wrap it in a dry newspaper, stuff it in the place where the shoes are squeezed and put in a plastic bag, seal the shoes and let them sit overnight.

3. Stuff potatoes. Find two potatoes that are big enough, peel them and stuff them into your shoes, and remove them after eight hours. Peeled potatoes will quickly soften the shoes with moisture, allowing them to become a little bigger.

4. Wipe with alcohol. Mix alcohol and water in a ratio of 1:1, dip the solution with a cloth and wipe the inside of the shoes, then wear them directly on the feet until the shoes are dry.

After the alcohol has dried, the shoes will retain the shape of the foot. This method is more suitable for leather and canvas shoes.

5. Heat your shoes with steam. When the kettle is boiling, hold your shoes against the steam at the spout and leave for 3-5 minutes.

6. Use ice cubes. Fill a plastic bag with some water, stuff it into your shoes, and try to let the water in the bag hold up the shoes completely. Put the shoes with the hydration bladder in the refrigerator and take them out when they freeze.

Shoes are bought one size smaller, and some squeezing feet can be used with liquor, heating method, white vinegar, paper balls, etc.

1. Use liquor

If we have a high concentration of liquor at home, then we can use a paper towel or cotton to dip it in alcohol and wipe it back and forth where we squeeze our feet. Or use a clean towel, dip it in liquor, apply it to the place where you squeeze your feet, let it sit overnight, and then put it on again, you will find that you don't squeeze your feet.

2. Use the heating method

First of all, we can first find out how many pairs of thick socks we have at home, preferably how many pairs there are, and then put on the socks and then put on shoes to expand the space inside the shoes. After putting on your shoes, don't rush to take them off, find a hair dryer at home, turn on the maximum hot air shield, and use the hair dryer to blow your shoes back and forth.

Use the principle of thermal expansion and cold contraction to make the shoes stretch out, and wait until the surface of the shoes becomes hot, don't rush to take them off, wait until the temperature of the shoes decreases, and then take off the shoes. Keep the socks in the shoes, put the shoes aside, let them cool naturally, and then put them on again, and you will find that the shoes become looser.

3. Use white vinegar

We can find a towel, wet it with white vinegar, wring it into a semi-dry state, and then stuff the towel into our shoes. Try to find a relatively large towel, you can stretch the shoes when stuffing, and then leave them overnight, and then wear them again the next day, and you will find that the shoes have become loose.

4. Use paper balls

When we buy shoes, we will find that there are generally some paper balls stuffed in the shoes, which is to prevent the shoes from collapsing and deforming. In addition to preventing the shoe from deforming, these paper balls can also prop up the shoe.

Tips for buying shoes

1. When trying on shoes, leave space at the toes to prevent the shoes from grinding the feet too tightly.

2. Don't just recognize the shoe size when trying on shoes. For example, if you often wear size 37, then you should try both size 36 and size 38. In addition, in the afternoon and evening, the feet will be larger than in the morning, so it is not recommended to buy shoes in the morning.

3. Take a walk when trying on shoes. The extension of the feet is not the same when standing and sitting, so walking more can give you a full view of whether the shoes fit properly.

If you buy small shoes, it is best to return them, because small shoes are very uncomfortable to wear, and it is easy to squeeze out the musculoskeletal deformation of the foot, causing bunion is very painful. If it's a little smaller and you don't want to return it, you can go to the leather goods store and ask him to give you a bigger last, so that it is very comfortable to wear.

If you find that the shoes you bought are smaller, is there any way to make them a little bigger...

Use a hair dryer to enlarge the shoes. Plug in the prepared hair dryer, then aim the air outlet of the hair dryer at the small part of the shoe and blow continuously for about 20 minutes, and then blow again every half hour, at least three times. This is based on the principle of thermal expansion and cold contraction, and the shoe will become larger.

I enlarge shoes using newspapers. Find some old newspapers, then crumple a few old newspapers tightly, dip them in some water so that they don't get too wet, then wrap them in dry newspaper and stuff them at the top of your shoes. Finally, seal the shoes in a plastic bag and wait until the next day.

Use socks to enlarge the shoes.

If it is a big one, the insole will be padd, if it is 2 fingers, go to buy a half insoles, to the forefoot, buy two pads, generally sports insoles, the kind of foam, so it is more used.

Expand the capital blind bridge materialInsole function classification:

1. Health care insoles are insoles that have health benefits for people's bodies. Such as: antibacterial insoles, deodorant insoles, traditional Chinese medicine insoles, etc.

2. Functional insoles: It is a shoe cushion with special functions. Such as: antistatic insoles, heightened insoles, waterproof insoles, air circulation insoles, etc.

3. Conventional insoles: insoles that do not have the above 2 points, which are very common.

Wearing style empty leather.

Common ways to wear insoles are explained here:

1. The whole insole can be placed in the shoe.

2. Correct the insoles to be worn according to the manufacturer's instructions, and the position is fixed.

3. The heel sticker can be directly attached to the heel part.

4. Place the seven-point pad in the shoe, as far back as possible.

5. The wearing of the half-size pad is fixed on the forefoot of the shoe.

6. The waist tape is directly attached to the waist of the shoe.

7. Place the heightened insole on the heel of the shoe.

8. The heel pad is placed on the heel of the shoe to prevent it from slipping forward.