Badminton racket, carbon fiber, normal hitting racket, easy to break, generally where easy to break.

Updated on physical education 2024-06-09
30 answers
  1. Anonymous users2024-02-11

    Medium and high-end rackets are only useful for carbon fiber, and the correct shot is generally not broken, and if there are collisions and other factors, there are generally 4 points that are most likely to break, which are 2 4 8 10 o'clock (the clock time). The internal injuries mentioned upstairs may not be understood, and the racket played by novices will not have internal injuries, and if the racket has internal injuries, the players must have a considerable level to have internal injuries.

  2. Anonymous users2024-02-10

    A good, normal workmanship meets the standard racket, the normal swing of the racket will not break like this, there are several main reasons for such a racket: 1, the frame of this racket is inherently problematic, the racket holes are not played well, and the force on each hole is uneven, resulting in the racket breaking; 2. The line is not well drawn and has not been formally measured, resulting in the force cannot be evenly dissolved, and the racket is broken due to uneven force; 3. The racket breaks when it touches other hard objects or touches the ground. Looking at the ** after the folding of this racket, I think the breaking of this racket should belong to the second possibility.

    Hope mine is helpful to you.

  3. Anonymous users2024-02-09

    Carbon fiber. Generally brittle, but it is not easy to break when hitting the ball normally.

    For example, when hitting the ball, if the frame hits the ball strongly, it may cause "internal injury".

    However, under normal use, if the tension of the tie is normal, it is generally unlikely to break.

  4. Anonymous users2024-02-08

    Under normal circumstances, it is not easy to break. If the racket breaks with too much force, the racket should also break in the direction of the swing. The situation reflected in this ** should be the fracture caused by a partial impact.

  5. Anonymous users2024-02-07

    2 o'clock 10 o'clock break. There is a possibility of fracture on a normal shot, and you can also look to see if there are any signs of collision. There may also be a problem with pulling the cord.

    Once I had a new shot, played for about 50 days, once hit the ball, just a few racket head 2 o'clock position, the frame was broken, keep the commemorative KS98TI... The mass production of a model of racket is destined to have internal cracks in some rackets, which is also recognized by many golfers.

    Carbon fiber is generally brittle, but it is not easy to break when hitting the ball normally.

    For example, when hitting the ball, if the frame hits the ball strongly, it may cause "internal injury".

    However, under normal use, if the tension of the tie is normal, it is generally unlikely to break.

  6. Anonymous users2024-02-06

    Not normally, only the string is often broken, and this is also related to the number of tensions you tie. The racket is also hard and soft, but as long as it is not particularly bad, it will not break so easily.

  7. Anonymous users2024-02-05

    It is not easy to break, and the line will be short.

  8. Anonymous users2024-02-04

    Good quality is not easy to break, and the connection between the ring and the stick is easy to break.

  9. Anonymous users2024-02-03

    It must have hit the wall or floor. The normal break is the weld between the handle and the net.

  10. Anonymous users2024-02-02

    It is a new generation of reinforcing fibers that not only have the intrinsic properties of carbon materials, but also have the soft processability of textile fibers. Compared with conventional glass fiber (GF), Young's modulus is more than 3 times higherCompared with Kevlar fiber (KF-49), it not only has about twice the Young's modulus, but also does not dissolve or swell in organic solvents, acids and alkalis, and has outstanding corrosion resistance. In 1981, some scholars soaked Pan-based CF in a strong alkali NaOH solution, and more than 20 years have passed, and it still maintains its fibrous form.

    So it's not easy to break.

  11. Anonymous users2024-02-01

    It won't break, you can be corroded regularly.

  12. Anonymous users2024-01-31

    It's not a normal swing that breaks, but the normal hitting swing of carbon fiber doesn't break.

  13. Anonymous users2024-01-30

    It won't break, it's just that the net is easy to break.

  14. Anonymous users2024-01-29

    The line at the top of the badminton racket is not broken by swinging normally.

  15. Anonymous users2024-01-28

    Probably not, unless you are Lin Dan, even if Lin Dan is just a net. Worship.

  16. Anonymous users2024-01-27

    Don't hit hard objects with a racket, your racket won't be like this.

  17. Anonymous users2024-01-26

    No, it was beaten and broken.

  18. Anonymous users2024-01-25

    I did this once, when the racket hit the ground and it became like this.

  19. Anonymous users2024-01-24

    This is like a normal swing that doesn't hit the wall without hitting the ball...

  20. Anonymous users2024-01-23

    It's easy to break the line on the net, especially when you get excited.

  21. Anonymous users2024-01-22

    Summary. The shooting line generally has a pull force of more than 22 pounds, and if there is a problem with the carbon, it will break in an instant.

    The shooting line generally has a pull force of more than 22 pounds, and if there is a problem with the carbon, it will break in an instant.

    The child pulled it with his hand, looking at the elasticity, the strength should not be large, and it broke instantly.

    So I wanted you to help me look at this fracture mark. It is not carbon steel.

    Burn it with a lighter and it will soften.

    Can you see this ** clearly?Do you need me to shoot clearer?

    It's carbon steel, it's very fragile.

  22. Anonymous users2024-01-21

    Not necessarily, there will be many reasons for it to break.

    How to choose a badminton racket.

    The lighter the racket, the better. A good badminton racket should have a certain weight, which can give full play to the explosive power of the wrist and be conducive to attacking. At present, most of the most used all-carbon rackets weigh 90-94 grams or 85-89 grams, the latter is more suitable for mass fitness.

    Especially for beginners or people who don't exercise regularly, it is easy to hurt your wrist with a racket that is too heavy. This type of person can practice the movement with a lighter paddle first, master the essentials of wrist force, and wait until they are proficient to hit with a heavier paddle.

    2.The handle should be moderately soft and hard. When choosing a racket, pay attention to the overall structure, elasticity and hardness of the racket.

    After getting the racket, Zhao Shao waved it to see if it shook his hands. The handle of the shaker is too hard, and the handle that does not shake the hand indicates that the elasticity is better. This is important because the smoothness of the racket is largely dependent on the elasticity of the handle.

    Generally speaking, the greater the hardness, the better the control, and the greater the strength, but it is difficult for amateurs to play, so you should choose a type with moderate elasticity. In addition, the choice of the handle should be selected according to the size of each person's hand, so that it is appropriate to feel comfortable holding the handle. People with large hands will feel uncomfortable holding a thinner or square handle; And for people with small hands, the thick handle of the clap is not proportionate.

    3.The racket string should not be too tight. The tightness of the badminton string is generally measured in terms of "tension" (marked on the racket) and must be determined according to the explosiveness and strength of the individual's wrist.

    Generally, it is divided into low pound (below 20), medium low pound (20-23), medium pound (23-25), medium high pound (25-27), high pound (above 28), the lower pound racket line is looser, and when hitting the ball, it is obvious that the ball has a lingering time on the racket surface, and the direction of the ball cannot be well controlled. High-weight rackets are highly professional, and only professional athletes can handle them well. Therefore, it is recommended that 20 pounds is enough for women who do not exercise regularly, 20-23 pounds for beginners, and 23-25 pounds for those with moderate skills.

  23. Anonymous users2024-01-20

    There are two reasons why badminton rackets are easy to cause.

    Breakage: 1. The quality of the racket itself is unqualified, and it is easy to break;

    2. In the process of use, if you use too much force or use it incorrectly, it is easy to break the badminton racket.

    The choice of badminton rackets.

    1. Initial feelings.

    When we buy a badminton racket, we must first observe the general situation of the racket, the simplest is to roughly swing up and down to try, pay attention to observe whether the opponent feels hard, if you feel that the hand must be very strong, then such a racket may not be made of good material, too heavy racket is obviously not suitable for long-term practice.

    2. Light and heavy feelings.

    Although the racket with a lighter feel is more agile in defense and shot, and when swinging for a long time, the burden on the arm is also lighter, but you should understand whether you belong to the defensive player or the offensive role, because the racket that is too light will appear too weak when attacking and smashing. The defensive type, because of the focus on agility to catch the ball, is more suitable for lightweight badminton rackets.

    3. String observation.

    This is a direct expression of whether the workmanship of the badminton racket is exquisite and meticulous, the above 3 points are only in personal feelings, and about the workmanship of the strings, it clearly reflects whether the manufacturer's quality control is rigorous, and it is also the best indicator to measure whether the badminton racket is a first-class product. Generally speaking, the badminton racket with better workmanship is more evenly rotated on the strings, and the spacing between each string, the interval between the upper and lower sides, is basically not much different from the naked eye.

    Gently pull each string a few times to observe and feel whether each string is tied very tightly, if so, then this badminton racket is more worth starting. Li Ning is recommended here.

    The badminton racket is still very exquisite in workmanship.

    4. Select.

    The choice of badminton racket and the reference of ** depend on the material, brand, and weight of the racket. The material of the racket determines the weight. Generally speaking, lightweight rackets are basically made of all-carbon materials, which are also more popular and popular.

    The ** is generally more than 300, of course, such a racket is very suitable for practice and exercise, and it is also the first choice for professionals. The rackets made of the rest of the materials are often too heavy and cheaper.

  24. Anonymous users2024-01-19

    1: The thickness of the line, this principle is easy to understand, the finer the easier it is to break.

    2: Line material, generally speaking, domestic line, do not consider the ball speed, control, sound, running line problems of the line, with relatively poor materials, so it is very durable, not easy to break! 3:

    The hardness of the line, this can also be divided into the following items, the hardness of the line is high, the pound feels high, and it is easy to break.

    4: The level of the tension, here is divided into two kinds, a: the tension of the pull line is high.

    The density of the B line directly with the line, that is, the density between the line holes, the higher the density, the tighter it is in the case of the same pound!

    5: Player strength, under the same tension, the greater the player's strength, the greater the impact on the line, and the easier it is for the line to break!

    6: The number of times you play and the interval between plays, the line has a limit, for example, if you play 6 hours a day, you can break a line in 6 hours, but if you play 2 hours a day, you can play 4 days, if you play 2 hours every other day, you can play 5 times, 10 days!

    7: The weight of the ball, the heavier the ball, the greater the impact on the line!

    8: Racket frame hardness. When playing, the ball hits the line, and the line shrinks the whole frame to the center point, if the frame material is hard, then the shrinkage is very small, the impact force of the line is great, and the line is easy to break, so many high-end rackets, the line is easy to break!

    9: Abnormal reasons, A: For example, the point of playing the ball is not right, close to the racket frame.

    B: The edge line is too far apart from the frame!

    C: The reason for the site, if the site is a cement floor, it will be broken when touched! Carbon can be sharpened like a knife, and the thread is ......Especially some rackets, when designing, this problem is not considered at all, the grooves on the outside of the frame are very shallow, the line is basically exposed, and the line can be worn off by picking up the ball!

    10: Climate, the colder the weather, the easier it is to break the line, this can be linked to point 3, the weather is cold, the line is easy to harden!

  25. Anonymous users2024-01-18

    This is simple, it is the reason for the badminton racket, the quality and the seller said that it is not the same, the label on the racket is not accurate at all, once the tension is enlarged, the racket can not bear it, and the quality of the racket, the real good racket is constantly played, can only be discounted, bent, your racket may be adulterated, just like the pig iron, the racket is carbon alloy, and the elasticity is very good. Don't use too much force when you play, except for point kills, other shots have a good buffer, but to be honest, your strength must be very big, I often play **, when I am almost a line in one or two games, you are often interrupted beating, which is really interesting.

  26. Anonymous users2024-01-17

    A: Don't hit too hard.

  27. Anonymous users2024-01-16

    LZ is mighty, and my YY beat has not broken for 10 years. Are you sure you're not sweeping the floor?!

  28. Anonymous users2024-01-15

    Badminton racket breakage is related to the tension, string diameter, frequency of use and other factors.

    1. Don't pull the pound too high, it is recommended to be below 24. The higher the poundage, the easier it is for the thread to break;

    2. Choose a string with a large wire diameter, and Yonex BG65 string is recommended, which is one of the most durable strings;

    3. Don't use the racket too often, if you play often, it is recommended to change the racket every time, the higher the frequency, the faster the line will break;

    4. Try to hit the sweet spot.

  29. Anonymous users2024-01-14

    With a more wear-resistant feather line, YY65 is more wear-resistant, about 25 pieces. After the thread is broken, it is generally cut off and replaced with a new one. I recommend you to buy Kaisheng's, it is very cost-effective, and I use Kaisheng's myself.

  30. Anonymous users2024-01-13

    1.If the vertical line in the middle of the racket is broken, it proves that your skills are often bad. Like Fu Haifeng, a game is broken once. There is no way to prevent it, and the harder you work, the easier it is to break.

    2.There is no remedy.

    3.Wear the YY 65 line, if you are afraid of breaking, it will be about 30.

Related questions
12 answers2024-06-09

Serve with the right hand to spin and counterspin, spin and counterspin are mostly squat serves, and the right side of the opponent's front friction ball with the racket is spin; The left side of the ball rubbed against the opponent's paddle is backspin; In short, "the positive is the good, the reverse is the negative". Use the front of the racket to rub the ball from the left back to the right side of the ball to rub the ball downward, that is, to spin downward; Use the front of the racket to rub the ball from the left back to the right front of the ball to rotate the ball upward; Rubbing the ball from the right back to the left side of the ball with the reverse side of the racket is reverse downspin; Rubbing the ball from the back of the right to the left front of the ball from the back side of the racket is reverse topspin. Catching the ball with downspin (downspin and topspin) and backspin (downspin and topspin) is in the opposite direction to the left and right spin balls, and the opponent's paddle is on the right side of the ball and goes to the opponent's left; The opponent's paddle is on the left side of the ball and is connected to the opponent's right side. >>>More

6 answers2024-06-09

How much does a badminton racket string cost?

8 answers2024-06-09

What brand of racket is it?

It may be that the wire master is not good at pulling and is too easy to break the line, one is the problem of the line, and the other is the problem of the wire pulling technology. >>>More

13 answers2024-06-09

It should be more suitable for Chinese use, after all, foreign athletes do not use Li Ning rackets much, so the production design is mainly designed in combination with the characteristics of Chinese. Yonex is more oriented to the world, and it is not good to say that it is also a stinky street. I think since the champion is Chinese, then the one who uses China is the best.

26 answers2024-06-09

First of all, the racket weight should be appropriate. The racket should have a certain weight, by no means the lighter the better, each racket should be marked with its weight, and the general standard is U. Usually full carbon feather racket. >>>More