What to do if the toilet is particularly blocked, what to do if the toilet is too badly blocked

1. The toilet plug is a tool often used when the toilet is clogged, you only need to put the end of the toilet plug with rubber at the toilet drain, and press hard repeatedly and then lift it up, for paper towels, plastic bags and other things, it is easy to rinse it clean.

2. After the toilet is blocked, you can also use a steel wire or hanger to disassemble it and bend it into the shape of a toilet sewer pipe, with a hook at the top, and stretch it into the toilet sewer pipe to stir back and forth to dredge the toilet.

3. You can also use baking soda and vinegar mixed solution to dredge, pour baking soda and vinegar into the toilet drain, there will be some foam and hissing sound, and then pour a small basin of hot water in it, so that the baking soda and vinegar are completely dissolved, which can effectively dredge the toilet.

4. Pour the pipe dredging agent into the toilet drain, pour about 15 grams each time, and pour it every 3 minutes - times. After pouring it, add hot water to it, usually wait about 10 minutes, and then you can rinse off the blockage with water, which is relatively common in the market and is easy to buy.

Follow the steps below to deal with it.

First, remove the toilet bowl and check whether there are any stuck foreign objects in the toilet trap.

If there is a foreign object stuck in the submersible bend of the toilet, it will affect the normal drainage of the toilet, resulting in slow drainage speed and easy clogging of the toilet.

If there are no foreign objects, it may also be due to throwing items that should not be thrown into the toilet bowl in the toilet, thinking that the toilet can be flushed, but the result is not flushed, such as paint putty powder, cloth heads, diapers, sanitary napkins, etc.

The toilet flushes away toilet paper.

Second, the problem of toilet quality can only be solved by replacing the toilet.

Inferior toilets, with narrow inner wall pipe diameters, rough surfaces, not smooth, and low flushing force, can only be solved by replacing the toilet bowl, there is no other way.

Hello, the reason for the blockage of the toilet may be that the drain is not aligned when the toilet is installed, resulting in the unobstructed drainage, or the toilet is aging, and the toilet will scale on the inner wall of the toilet after a long time, and in serious cases, it will affect the vent of the toilet, and eventually cause blockage and poor drainage. Treatment method of toilet blockage: 1. Use pipeline dredging agent, pipe dredging and canopy canopy is very practical, pour a little pipe dredging agent into the toilet, and then add dredging tools to solve this problem, this method can not only dredge the pipe but also purify the odor of the toilet pipe.

2. Detergent and hot water are also a good method, first pour dish soap into the toilet, then pour boiling water into the toilet, and then press with the leather terminal, the dish soap will dissolve the dirt around the toilet pipe, you can also add the dish soap to accelerate the dissolution through hot water activation, and wait for half an hour to flush directly to dredge. 3. Baking soda and white vinegar together Zheng You will have a chemical reaction and produce bubbling, and when the bubbling is gone, pour it into the toilet and then heat the water to flush it. The effect is also very obvious; 4. Plastic wrap is a special medicine for dredging the toilet, first use plastic wrap to wrap the place except for the flushing accident can not leave a little gap, and then press the flush switch of the toilet, then the plastic wrap town will be flatulent and bulging, and finally we only need to press down, use the pressure of the air to press down the blockage of the toilet, this method is very effective, the effect is very good.

Kiss, <>

We're glad to answer your questions! Pry the sealing strip under the toilet with a knife, remove the entire toilet base, lift it up to remove the blockage inside, and then reseal the toilet with hot melt adhesive. Extended information: You can use the toilet plug to press hard and repeatedly on the drain to suck out the blockage with suction.

It can also be cut with a wire or hanger and then bent into the shape of a hook to hook out the blockage inside the toilet. You can add about fifteen grams of dredging agent to the toilet, add it once every three minutes or so between the compartments, repeat it several times, and then add hot water to the respondent, and wait until it is fully dissolved, so that the blockage can be flushed out. If none of the above works, you need to ask a professional for help.

How to clean the inner wall of the toilet bowl 1, flush the lid first, and flush it with clean water. Be careful to close the lid whenever you flush, as it will create a very large cyclone that will wash bacteria into the air and remain suspended in the air for several hours. Eventually, these bacteria can land on toothbrushes, towels and mouthwash cups, affecting human health.

2. After soaking and flushing, add detergent along the inner wall of the toilet, and then close the lid to soak the potatoes. If there are stubborn stains on the inside of the toilet, you can add a little white vinegar to soak for a few minutes, and then brush vigorously. The water outlet on the inner wall of the toilet bowl is prone to rust, so the toilet seat should be lifted and thoroughly brushed when cleaning.

3. After disinfection and brushing, disinfectant can be sprayed on the inner wall, or wiped with prepared disinfectant water, so as to achieve the effect of killing bacteria. Wipe the toilet bowl dry with a dry rag after cleaning and keep it dry, which will reduce the growth of bacteria. Article Summary:

The above is the relevant content of what to do if the old toilet is seriously blocked and how to clean the inner wall of the toilet, I hope it can help some friends in need. Hope mine can help you! <>

The toilet is too seriously congested, and the treatment methods for empty Qingqi are: flushing with water, using plastic wrap, flushing with plastic hoses, sucking with the toilet, using toilet loosener, and seeking professional help.

1. Flush with water: Prepare a large basin of water, flush it down in one breath at a higher position above the toilet (more than 1 meter), and try several times repeatedly, if the blockage is not very serious, it will generally be solved.

2. Use plastic wrap: Wrap the toilet seat as a whole with plastic wrap, not leaving a little gap, and wrap it tightly. Then press the toilet switch and you can see the plastic wrap bulging.

Finally, press down, and use the principle of air pressure to press down the clogged dirt in the toilet, and the toilet will be dredged.

3. Connect to the plastic water pipe flushing: find a longer plastic water pipe, connect the water pipe at one end, and plug it into the toilet mouth at one end (the water pipe plugged into the pipe can be extended appropriately according to the situation), and then block the toilet mouth with rags, then open the tap water, and use the water pressure to dredge the pipe.

4. Suck with the toilet: add water to the toilet, when the amount of water can have a certain momentum, suck the toilet bowl at the mouth of the toilet, press it violently, as long as you hear it, there is a knock, it means that it is through, if it doesn't work, add water and press again.

5. Toilet dredging agent: It is a thick liquid that is specially designed to deal with toilet blockage, which can better decompose the blockage and is very easy to pour out and use. The safe bottle cap design can effectively prevent young children from accidentally opening and ingesting, it can not only unclog the toilet, but also can dredge any type of pipe such as aluminum.

6. Seek professional help: If the above methods are useless or the hard object blockage cannot be taken out, it may be necessary to remove the flush toilet from the floor and turn the toilet upside down to Douling, so that the blockage can be removed from the toilet. It is advisable to seek professional assistance for this work.

The solution to blocking the toilet 1, the most commonly used and easiest to think of should be the leather pick. Also known as "water pluck". It's not technically difficult, and it's easy to use.

The way to use is: add water to the toilet, and then look at the amount of water can have a certain momentum, put the leather hammer at the mouth of the toilet and press it violently, as long as you hear a 'knock', it means that it is through;If it doesn't work, add more water, press again, and that's it. 2. Dunbu method:

Mop the floor with your mopping cloth. First put the cloth at the mouth of the toilet, and then put water to ensure that the water submerges the cloth. Then press the round and infiltrate dun cloth hard, stuff it into the toilet mouth as much as possible, and finally lift the dun cloth as fast as possible, repeat this action, the things in the toilet will be sucked out, and the pipe can be unobstructed.

3. Find a longer section of plastic water pipe, connect the tap water at one end, plug the toilet mouth with the other end, carry the ridge and then block the toilet mouth with rags and other things, and then turn on the tap water, which will use the water pressure to dredge the pipe. 4. Buy some caustic soda, boil water to melt the caustic soda, and pour it into the toilet. After ten minutes, everything was cleared.

5. Use an appropriate amount of oxalic acid (usually you can also use oxalic acid to clean the toilet, just neutralize it with urine alkali to achieve smooth toileting).

Summary. My dear, if the toilet bowl is slightly clogged due to paper towels, easily decomposable substances like paper scraps can easily cause clogging. In this case, you can directly pour boiling water into the squatting pit to soften the blockage in the water pipe under the action of boiling water.

Wait a few minutes for it to soften, and you will see the blockage go down on its own, at this time use a few more buckets of water to rinse vigorously a few times and go down.

My dear, if the toilet bowl is slightly clogged due to the lack of lead and paper towels, it is easy to cause clogging of easily decomposable substances like paper scraps. In this case, you can pour boiling water directly into the squatting pit, so that the blockage in the water pipe can soften the acacia reed under the action of boiling water. Wait a few minutes for it to soften, and you will see the blockage go down on its own, at this time use a few more buckets of water to rinse vigorously a few times and go down.

If other hard objects fall into the toilet and cause the toilet to clog, it is better than a messy manuscript such as plastic brushes, bottle caps, or even hard objects such as bones falling into the toilet. If this blockage is relatively mild, it is better to find a longer plastic water pipe to rent. One end is connected to the water pipe, the other end is stuffed into the toilet mouth, and then the tap water is turned on, which uses the water pressure to unclog the pipe.

If it is really serious, please ask a professional dredging team to disassemble the squatting pit and dredge it to completely solve it.

The toilet is blocked by feces and the dredging method is as follows:

Step 1: Don't be impulsive when you notice a clogged toilet

Generally, many people find that if they flush but do not get water, they will flush it a second or third time, which is a wrong move! If you can't flush the first time, stop flushing, as this will cause more water to fill the pot. The first flush will not cause the toilet basin to overflow, but the second flush might.

Step 2: Turn off the water source

There are two ways to turn off the water source, one is to turn off the entire water supply system in your home, but in this case, you need to clean the water in the water pipes in advance, otherwise you may end up with water everywhere. The second method is to see if the toilet has a toilet angle valve, and if an angle valve is installed, you can simply close the toilet angle valve.

Step 3: Diffuse odors and keep ventilation

Make sure the toilet is well ventilated. Open your ventilation or windows to minimise foul odors and avoid inhaling too many potentially toxic gases from any chemical products you may be using.

Step 4: Pour in detergent and hot water

Pour in a little dishwashing detergent. Pour a few drops of dishwashing detergent down the toilet. Pour a basin or half a bucket of hot tap water from waist height into the toilet basin.

The reason for pouring water from waist height is because this high level of water can help unclog blockages or flush away corrosion. The temperature of the hot water is like the temperature of the usual tea, and there is no need to boil the water, because too hot water can break the ceramic.

Too little water is also not effective, because you need to let the temperature of the water flowing into the toilet or slapping in the blockage rise. Leave the water and dishwashing detergent on the toilet sink for a while. Sometimes this will allow the blockage to soften, loosen, and then clear itself.

Step 5: Wait before flushing

After waiting for the blockage to soften and loosen, we can directly flush the toilet. If the water cannot flow into the toilet, it means that the blockage is not dissolvable, and it is recommended to find a toilet repair master to unclog the toilet at this time.