How to clean the fan, tips for cleaning the fan

Teach you how to clean an electric fan.

<> "Tips for cleaning fans.

First prepare a container, pour and pour in an appropriate amount of baking soda.

Then pour in an appropriate amount of white vinegar.

Then pour in some dish soap.

Finally, pour in water to dilute.

Stir well and slide into the watering can.

Spray the prepared solution on the fan blades, and remember to spray the reeds before and after!

Finally, put the fan in an open place and turn on the fan, so that the stains on the fan will fall off by themselves, which is very simple and convenient! Let's go back and give it a try!

1. First of all, you need to move the dusty fan out and put it in an area that is convenient for movement.

2. Make a basin of water, and ask for soapy water in the water or a waiter to wash simple potato detergent, etc.

3. Prepare the screws, etc., remove the fan, and put away the removed screws.

4. Wipe the shell of the fan with a wet towel first, and clean it with a steel wool ball if it encounters more stubborn dust.

5. To clean up the fan activity page, you need to pay attention to the edge to prevent scratching your hands.

6. Clean the dust from the corners with a brush.

7. During the cleaning process, do not drop water droplets into the fan line to prevent the fan from being energized.

8. After cleaning and drying the fan for a period of time, you can continue to use it after reinstallation.

1. Cut off the power supply of the fan and remove the protective net of the electric fan. There are cards around the protective net, after loosening the card, unscrew the screws, and the protective net can be removed.

2. Then remove the fan blades, unscrew the round plastic cover in the middle of the front of the fan blade, and you will see a small section of the shaft exposed. Different models of electric fans have slightly different designs, and some need to remove the small screws on the side of the fan blades.

3. Add water and detergent to the cleaning basin, carefully scrub the protective net and fan blades, the detergent can be used laundry detergent or detergent and other commonly used household products, but do not use oil-based detergents such as gasoline, because oil-based detergents will cause corrosion to paint and plastics, damaging the appearance and even life of the electric fan. Then use a rag dipped in detergent to scrub the small parts and the body of the machine, after the cleaning is completed, wipe all the parts with a clean dry rag, and then put it in a ventilated place to dry for a while.

First disassemble the fan, there is a screw in the middle of the wind wheel in front of the fan, and there are a few small screws in the back shell, and the fan is all disassembled.

Remove the fan and wipe it slowly.