What should be paid attention to when choosing various floors for floor heating?

If it is a wood floor, you must choose composite and laminate flooring, solid wood flooring has a high moisture content and is easy to deform after heating.

The thermal conductivity of the materials is listed in descending order as:

Natural Stone > Tiles > Parquet > Laminate Flooring > Hardwood Flooring > Chemical Fiber Carpets > Wool Carpets.

To achieve the same heating effect, the smaller the thermal conductivity, the higher the operating costs. In addition, no air interlayer should be set under the floor decoration materials, such as rubber or foam materials.

If you install floor heating, you generally use laminate flooring, and if you install solid wood flooring, because it is thickened, it is not recommended, and the heat dissipation effect is slow If you choose a composite floor, it depends on whether the back of the board is marked with the words of geothermal and deformation resistance, and there is a popularity of the board. Laminate flooring is cheaper and has more colors.

That is to consider what will happen after geothermal heating, the main consideration:

1. Harmful substances will be released twice after heating.

2. Changes in temperature and humidity will deform the floor.

3. Whether the floor will block the conduction of heat.

I think it's probably these aspects, and I think as long as it's made of wood, it won't solve these problems.

When the Water Cube was held, it was also floor heating, and it was paved with elastic floor tiles, which was called stone molding. I think this thing is good, and I have seen a company specializing in selling this thing in Jimei, not far away, called Shenxing Eco Flooring.

1. As long as it is not a wooden floor with a keel, 2. Try not to use carpet, 3. Do not use moisture-proof film with aluminum film When I installed it, people only told me these three points.

Floor heating floor is a major topic for all floor production enterprises to study, in the requirements of environmental protection, floor heating has become the primary choice for many family heating. So,What flooring is used for underfloor heatingOkay? Let's take a look.

The so-called floor heating is the abbreviation of floor radiant heating, this home heating method is to use the whole ground as a large radiator, through the heat medium in the floor radiation layer to achieve the purpose of evenly heating the floor, and conduct heat to the ground, to achieve the purpose of heating indoor personnel.

What flooring is good for floor heating1Heat retention

Experts said that in terms of heat dissipation, the heat dissipation of wood floors is not as good as that of ceramic tiles. But on the contrary, the insulation of wooden floors is stronger than that of ceramic tiles. Tiles usually reach the required heat faster, while floors take 1 to 3 hours depending on the material used and thickness.

Comparatively speaking, at the same temperature, when the underfloor heating is turned off, the house with wooden floors can maintain a higher temperature for a longer time.

What flooring is good for floor heating2Eco-friendliness

The most environmentally friendly solid wood flooring is not suitable for floor heating flooring, and composite wood flooring more or less contains a certain amount of formaldehyde, and the heating of floor heating will accelerate the release of formaldehyde, which is also a problem that many consumers are worried about. When consumers choose floor heating floors, they must choose floors with low formaldehyde content as much as possible.

Tiles are naturally radioactive, which is a concern for many consumers. According to experts, the ceramic tile is fired at a constant temperature of 1200, and the radioactivity of the tile will not increase because of heating for floor heating, and the radioactivity of the tile will not cause harm to consumers if it meets the national standard.

What flooring is good for floor heating3Comfort

The wood floor is comfortable in color, natural and beautiful, excellent in softness, very comfortable in the foot, and will bring people a warm and comfortable feeling, which is the reason why many people choose to lay wooden floors when decorating. The tile, on the other hand, has a hard texture and is not easy to create a warm feeling. When choosing tiles, it is necessary to consider two aspects: hardness and flatness.

Experts point out that it is necessary to choose tiles with high hardness, and at the same time, the flatness of the tiles should not exceed millimeters. At present, the antique bricks and vitrified bricks on the market are better choices, and the antique bricks have more requirements for decoration style, and the vitrified bricks are more suitable for the public to choose.

What flooring is good for underfloor heating4Stability

Ceramic tiles are more stable than wooden floors, due to the low moisture content of tiles, high temperature and no deformation, and better stability. If the change is too large, it may cause the floor to deform and warp, so the solid wood floor is not suitable for geothermal flooring. If you choose to lay wood floors for underfloor heating, it is best to choose multi-layer parquet flooring.

Because in the same environment, multi-layer parquet is the most stable and not easy to deform. In terms of post-maintenance, the care of ceramic tiles is very easy and convenient, while the wooden floor is relatively complicated.

That's it for youWhat flooring is used for underfloor heating

You can get it for free

Home decoration and installation of floor heating, most of them think that laying floor tiles is the best, the floor is not very suitable, in fact, it is not, but as a more complex system engineering, there are certain requirements for the laying of the floor.

1. Before laying, in order to avoid damaging the heat dissipation coil, the construction method is not allowed to destroy the surface.

2. Heat and deliver water to the floor heating system, and the water temperature is at least 50 to ensure the normal operation of the floor heating system, and continue to heat preservation for more than 12 hours.

3. Check whether the ground is kept clean, tidy and dry, whether the gap between the door and the ground meets the demand, and whether there is leakage in related facilities.

4. When the laying season is a relatively cold season, in order to reduce the possibility of floor deformation, the floor should be placed on the site in advance to adapt to the temperature difference change on the site.

1. Lay the special mat neatly on the ground and seal it with self-adhesive tape at the interface.

2. The direction of floor laying should be proportional to the light of the room, when installing the first row, the long side groove is towards the wall, put the wooden wedge between the floor and the wall, and ensure that the floor has 8-12mm expansion and contraction gaps, and the floor between the rows should be installed in staggered joints, and the distance between the staggered joints is not less than 20cm.

3. Observe the height difference, gaps and other defects on the surface of the floor, and only after meeting the requirements can the sizing be spliced, and the excess glue remaining on the surface of the floor should be cleaned up in time while sizing.

4. If the interface between the room, the living room, the corridor, etc., or the length of the floor is greater than 8m, in order to reduce the arching phenomenon of the floor, the floor needs to be cut off, leaving an expansion joint of 8-12mm, and connecting it with a closing strip.

After laying

The time for people on the floor should be 12 hours after it has been laid, but the follow-up work should be carried out after 24 hours.

In winter, heating is very important, and floor heating is the most comfortable way to heat, when choosing floor heating, you should pay attention to the choice of flooring.

Floor heating generally does not use solid wood flooring, laminate flooring, or solid wood flooring, mainly solid wood flooring will be dry and deformed after being baked by floor heating, arching, and reduced moisture content. In addition, the thermal conductivity of wood is relatively poor, which affects the heat dissipation of floor heating.

Floor heating belongs to low-temperature radiant heating, the heating water temperature is about 40-50 degrees, and there is a concrete protective layer above the floor heating pipe, so the temperature of the ground is about 30 degrees. If you lay a solid wood floor with a wooden keel, the worse the thermal conductivity.

Therefore, in order to have a better heating effect, the floor heating room generally does not use wooden floors or uses less, and it is best to use ceramic tiles. Or with electric underfloor heating laid under the wooden floor. The type of floor can choose laminate flooring, because the stability of this kind of floor is relatively good, made of wood-based panels, it is not easy to be deformed and cracked by heating, and the disadvantage is environmental protection, and it is easy to release harmful substances such as formaldehyde at high temperatures.

1. The floor is stable in size and can withstand temperature changes without damage.

2. No deformation and cracking, and the coefficient of thermal expansion and contraction is small.

3. Environmental protection, no formaldehyde and harmful gas release.

4. Don't be afraid of soaking the floor with water (prevent the floor heating pipe from being damaged, the water from flowing out, and the floor from being damaged).

If there is floor heating, you must choose those materials that are resistant to high temperature and are not easy to deform when installing the floor, if you choose the ordinary one, it is easy to cause thermal expansion and cold contraction of the floor cracking, and the maintenance cost will be more.

At present, there are many floors for underfloor heating, and not all floors are suitable for underfloor heating. Compared with floor tiles, the wood floor material is soft and anti-slip function is good, can well protect the elderly and children who are inconvenient, although the heat dissipation is not as fast as the floor tiles, but the heat preservation time is longer, its quiet foot feeling and unique visual effect, by many consumers love.

Floors that can be used for underfloor heating must meet the following prerequisites:

1. The size of the floor is not messy, and it can withstand temperature changes without damage;

2. No deformation and cracking, and the coefficient of thermal expansion and contraction is small.

3. Environmental protection, formaldehyde-free and harmful gas release;

4. Don't be afraid of soaking the floor with water (prevent the floor heating pipe from being damaged, the water from flowing out, and the floor from being damaged).