How to keep driving in a straight line for 100 meters without moving the steering wheel

Method: Hold the steering wheel at 3 o'clock and 9 o'clock with both hands, and apply moderate and natural force. When the steering wheel rotates passively due to uneven ground, it is appropriate to gently reverse the correction. The faster the vehicle, the faster the correction will be, but the smaller the correction will be.

In short, the direction is slightly corrected at any time according to the vibration from the body and steering wheel, so that the vehicle can drive according to the intended line.

Note: First, do not force merging. Merging can not affect the normal driving of other vehicles in the lane to be merged, and the normal driving vehicle has no obligation and responsibility to let the merging vehicles pass first, so do not forcibly merge.

Unless there are special circumstances in front of you, such as a traffic accident, and you have to force a merger, you should give way to the vehicles that are going to merge into the lane and drive normally.

Second, continuous merging is not allowed, which is not only unsafe, but also a violation of the Road Traffic Law.

Third, don't merge frequently, it won't be much faster.

Fourth, merge ahead of time – especially before you plan to enter or leave the main road. If you are more than 2 lanes away from the exit, you should merge one by one, and you cannot wait until you are close to the exit, which is the most likely time for traffic accidents.

Tips: When merging, you must accelerate or decelerate, in this case it will definitely be higher than driving at a constant speed. When we drive in our daily life, we often see some people drilling around in the traffic, which is called "swimming in the car river", which is not only dangerous but also increases fuel consumption.

Is the car in the middle of the road? If yes, it's simple.

100 meters straight-line driving know-how

1. Before driving in a straight line, finally raise the speed and use the second gear to pass the project. In this way, the speed is relatively fast, the direction is different, and the time to pass the distance of 100 meters is also a little shorter, which can be described as a quick knife to cut through the mess.

2. Enter the second gear, after the speed is raised, look far away and observe the road sidelines on both sides. Slowly adjust the distance between the vehicle and the road sideline, so that you are in the middle of the road, and look at the rearview mirror, and slowly adjust the body is not correct to eliminate the early.

3. Maintain this state and start driving in a straight line, after entering the straight driving project, look farther, observe the road edges on both sides, and keep yourself in the middle of the road.

4. Gently hold the steering wheel while driving.

As long as the road surface is flat, the car will not be biased, otherwise once the finch is tense and uneven, it will cause the vehicle to deviate.

5. If the car is old and the car is offset, you can fine-tune the direction, and the range of the direction should not exceed 5 degrees, and the moving car will be significantly adjusted by hitting the direction of the body.

Straight-line driving assessment requirements:

1. Candidates should start smoothly and the driving operation sequence is basically not chaotic when driving in a straight line;

2. Be able to correctly grasp the steering wheel (mainly operate the steering wheel with the left hand), and be able to apply the steering wheel to correct the driving direction by sliding the slide freely;

3. Be able to master the timing and method of shifting gears, and be good at interchanging high and low gears at various speeds (step-by-step up-shift, step-by-step downshift or skip-shift reduction);

4. And be able to use the key friend brake (predictive braking deceleration) in a timely and effective manner; 5. The method of fixed-point parking and intersection U-turn can be basically achieved.

Straight-line driving skills:

1. First of all, when the driver is driving in a straight line, he must look ahead and pay attention to both sides, and must select the reference object, keep driving in a straight line, correct the direction in time, and always pay attention to various traffic conditions in front of him, so as to find and deal with it in time.

2. To look at the distance and hold the right direction, the driver should adjust the distance in front of the vehicle with the change of speed. The speed of the car is fast, and you should see farther; If the speed is slow, you should look closer; And use the afterglow to pay attention to the situation around the vehicle in a timely manner.

3. The operation of the steering wheel should be pulled with one hand and pushed with one hand, and the steering wheel should be operated smoothly and naturally with both hands, and the hands should be kept shoulder-width apart, and the force should not be too great.

4. When correcting the direction, it is necessary to hit early, play less, and hit and return, so that one hand pulls and one hand pushes, and both hands work together to operate and keep the vehicle in a straight line.

5. Finally, there is the requirement of vehicle speed, driving at a constant speed to maintain a straight line, under normal circumstances, you should insist on driving at a medium speed, and the speed should not let the combustion exceed the warning line, which can not only ensure driving safety, but also save fuel, and the test should be accelerated or decelerated according to the requirements.

To drive in a straight line for 100 meters, you need to grasp the position of the steering wheel at 3 o'clock and 9 o'clock with both hands, and use reasonable force. If you want to drive in a straight line, you must see far and open your field of vision, and only by looking farther can you make the vehicle drive very straight. If there is a deviation, you need to adjust it by fine-tuning the steering wheel.

The driver can fine-tune the steering wheel according to the specific situation, but it is necessary to be careful not to make large adjustments. When you find that the vehicle has a deviation, you need to fine-tune the steering wheel in time, and do not wait until it is completely deviated to adjust, so that it will be too late, and it will only become more and more serious.

Straight driving mainly represents, the novice driver starts in the driving vehicle, slowly accelerates, and raises the lowest gear all the way to the highest gear, so that the vehicle reaches high speed. After that, you can slow down, lower gears, and even stop at the end, depending on the situation. Driving in a straight line requires candidates to start very smoothly, the sequence of operations is not chaotic, and the steering wheel is correctly grasped.

Here's how to drive in a straight line for 100 meters:

1. Find references

The choice of reference is directly related to whether you can drive in a straight line, if you don't look for a reference, simply rely on the driving experience, it is very easy to deviate. The choice of reference is to choose a distant tree or an eye-catching reference as much as possible. The reference object is more than 100 meters away from us.

2. Posture and line of sight

After selecting the reference, it is necessary to ensure that you can sit upright and keep your sight, and then pay attention to the left and right road conditions, according to the reference, to observe whether the vehicle is deviated, and then use more afterglow to check the rearview mirror, see the position of the body in the lane, and make small adjustments.

In the exercise of subject 2, the skill of 30cm away from the sideline of the body is the same, and the rearview mirror is more to observe the left and right body body, which can prove whether you have deviated.

3. Speed control

If you want to pass easily on your own, try to keep your speed at 40 km/h. If the speed is too slow, it is easy to cause the direction angle to be too large when repairing the direction, causing the body to swing left and right.

When the speed of the car can be faster, when adjusting the direction, only fine-tuning is required, which can better ensure that the body is still elongated or straight. And the faster the car, the faster the project can be completed. Pay attention to the operation of the steering wheel back to the right when repairing the direction.

The content of the road driving skills test in Module 3 generally includes:

Preparation for getting on the bus, light rushing and staring at the mock test, starting, driving in a straight line, adding and decreasing gear operations, changing lanes, pulling over, going straight through the intersection, turning left at the intersection, turning right at the intersection, passing the pedestrian crossing line, passing the school area, passing the bus stop, meeting the car, overtaking, making a U-turn, driving at night and driving safely and civilly.

The tips for driving in a straight line 100% without deviation are as follows:

1. If you want to keep the vehicle in a straight line, you must look farther, so as to avoid deviation from the direction. While driving the vehicle, you should also use your peripheral vision to look at the near front of the vehicle, the left and right vehicles, and the rearview mirror.

2. Three points and one line, to put it simply, you need to find a suitable reference during driving a vehicle, such as a lane divider or railing in the middle of the road. Once the owner notices that he has deviated from this reference, he should adjust it in time.

3. Control the speed, you still need to maintain a constant speed during driving the vehicle, if the vehicle in front of you suddenly accelerates, the speed is separated by a large distance, and the road conditions are good when you need to take the initiative to keep up. If the distance between the vehicle and the front car is too close, reduce the speed of the vehicle in time.

Subject 3 Hand-Eye Coordination Skills:

1. Eye: Choose a good reference object and look far and near.

The general trainee's car feeling is not good, and it is difficult to observe and walk in a straight line with his eyes, so he can use the trees on the side of the road or the marking line on the road surface as a reference to judge the integrity of the body.

If the trainees have been staring at the direction of the front of the car, it is difficult to observe, so they need to look as far away as possible, of course, for the sake of driving safety, the afterglow should also take into account the road conditions around the front of the car.

2. Hand: left main and right auxiliary, fine-tuning early hit.

When driving, holding the steering wheel with both hands is the wrong gesture, and the most direct result of this is that when the right hand shifts, the steering wheel will be unbalanced and deviate to the left in an instant, and the car will deviate. Therefore, the left hand is the main control of the steering wheel, and the right hand is gently placed on the right side as a support.

In addition, subject three car speed is faster, so can not be found when the direction of the deviation and then adjusted, at this time has long been judged to be unqualified in the exam, the direction of adjustment should be predicted in the process of letting the hail drive, found that the trend is not right on the timely adjustment, the adjustment range can not be large, control within 5 ° (if the speed is relatively slow, it should be slightly larger, but not more than 1 4 laps).