What s an easy way to slipper?

Preparation materials: one pair of soles, two rolls of cotton thread, and one crochet needle.

1. First of all, lay the foundation, the starting source point is selected on the side of the shoe, the crochet needle is passed through the bottom line, hook the wool, and then hook the line out from under the bottom line. Hook the wire, pull it out of the coil, and pull it tight appropriately.

2. Hook the thread out from the bottom line, wrap the thread around the crochet needle, and pull the thread out from the two coils. This is a short needle method, and the bottom thread is hooked with the same needle method.

3. Start crocheting the upper and thread the crochet needle directly through the adjacent pores. Wrap the thread around the crochet needle, hook the crochet needle to the winding, and pull out the pores from the end of the thread to form 2 coils. Hook the previous one through the back one to form a coil.

4. Hook the crochet needle to the end of the thread, stretch it through the coil, and remove the crochet needle. Pull the thread tight, but don't cut it yet. The first row of the upper is hooked.

5. Start to hook the second row, and the position of the needle threading is on the right side of the first row of needle holes, separated by 1 pinhole. The wire is taken out of the pore to form a coil. Wrap the thread around the crochet needle, take the thread out of the coil, tighten it appropriately, and complete the second row of needles.

6. When collecting the needle, thread the crochet needle into the holes of the second space, and the stitching method is the same as that of the first row.

7. Then it is the same method to hook the rest, you can add patterns, novices are recommended to hook without flowers to try the hand.

8. A pair of shoes is hooked, as shown below.

Tools Raw materials: coarse wool, crochet hooks.

1. First of all, prepare the soles of the good line, start to hook a circle of bottom lines from the toe position, and leave a line beyond the length of the sole when hooking.

2. After a circle of bottom lines is hooked, hook the left tail line into the last stitch, and then tighten the line so that it is fixed (the toe head should be hooked a little tighter, because the line is thicker and the distance will be farther, which is not conducive to starting to hook the upper).

3. Then pull the main line to the other side, and the line should be hooked a short needle at an angle forward.

4. Then hook a "medium and long needle" every other needle, and hook a total of "5" long needles on the toe cap (one needle must be hooked forward for each fixed needle).

5. In the process of crocheting halfway, there will be inconsistencies on both sides, which is a normal situation.

6. As long as you hook forward a little more, this gap can be flattened.

7. In the process of crocheting, it is necessary to compare with another crocheted shoe from time to time, so that the two shoes can be the same.

8. And when the hook is in the middle position, two needles should be fixed forward, and both sides should be consistent.

9. When hooking to the back rows, tighten the line appropriately to avoid the cuff being too fat.

10. In the last few lines, hook three stitches backwards, so as to show the arc of the slippers, and pay attention to the consistent position of the edges of the two shoes.

11. When the slippers are hooked to the last line, this row does not hook the medium and long needles, but instead hooks a short needle.

12. Cut the thread after the hook is completed.

13. Hide the thread again.

14. That's it, see the effect.

1. Start 16 stitches and choose some thin rod needles, so that the braided upper will not be very hard.

2. The second row begins to add needles, one back and forth, two rows, and add a sleeve needle when there is still one needle left on the far left of each row.

3. The size of the upper is suitable for the width of the shoes usually worn, and the ears of the shoes begin to be knitted after the upper reaches the length of the instep.

4. The weaving method of the ears and balance: leave a number of needles in the middle, and give the rest of the needles to the two ears equally, and then start to weave one of them.

5. Do not close the needle near the sole position, collect a needle on the other side of each knitting to the end, and leave three stitches at the end, and don't be busy tearing off the thread after one ear is completed.

6. Start to walk back, the whole upper is double-layered, and now start to weave a clone of the ear just now, how to collect the needle just now, and how to pour it back now and put it out.

7. After both ears are two layers, then make the second layer of the upper, and after weaving the two layers of the upper, it is best to find some cloth and stitch it in the middle of the cracked upper, so that the upper of the wool is not easy to go out of shape.

Here's how to make slippers:Step 1: Cut out the shoe pattern according to the shape of your foot.

The shoe sample is divided into two parts, one is the sole part and the other is the upper part. Prepare the cotton cloth, according to the shoe pattern, cut out the shoe shape, the upper part can be used 2 to 3 layers of cotton, and the middle of the cotton cloth can also be used to pinch cotton. The sole part can be used with 3 to 5 layers of sole cloth, and the bottom layer should have a non-slip hand effect, so you can choose according to your needs.

Step 2: Sew the two parts together. After sewing, use your favorite lace to wrap the slippers on the edge, pay attention, when the hemming is sewn from the reverse side, and then wrap it back, sew it again, and the socks are done.

The easiest way to make slippers:

There are two ways to make cotton slippers, one is to sew it with a sewing machine and sew it to the sole with a needle (now you don't have to do it yourself, and it is not waterproof and easy to wear), and the other is to hook it directly to the sole with wool, which we call wool slippers.

(1) First of all, we have to buy soles (you can buy one or two sizes larger, so that it is appropriate to sit down), buy inner lining cloth (the color is lighter) and outer lining cloth (the color is darker and dirt-resistant), and the cotton (we use cloth shells here The grandmothers use many layers of cloth, and then use konjac powder paste to stick together and dry) After buying, you can start to do it.

2): Find the upper face mold of the shoes, and cut an inner mold and an outer mold with the inner lining cloth and the outer lining cloth respectively;

3): The middle of the two layers of cloth should be covered with cotton (we use the cloth shell, but also cut into a face mold);

4): Sew the edge with a sewing machine, and the upper surface can also be sewn to increase the hardness;

5): Sew the top and bottom of the shoe with a thick needle and a thick thread, so that one shoe is ready, and the other is done.

Moving on to the second method (hook and mop):

1) Choose your favorite wool, soles (the soles should also be one or two sizes larger), and crochet hooks;

2) Crochet soles, the crochet method of the sole I am used to hooking from the heel, hooking about eight needles at the beginning, only one turn plus one needle, so that the hook is slowly added, and a sole can be hooked;

Take 16 stitches and choose some thin rod stitches, so that the braided upper will not be very hard.

The second row starts with two needles, one back and forth two rows, and adds a sleeve of needles when there is one stitch left on the far left of each row.

The size of the upper is suitable for the width of the shoe that is usually worn, and then the upper reaches the length of the instep and the "ears" of the shoe are knitted.

Please click Enter a description.

4.Weaving method of "ears": leave a number of needles in the middle, and the rest of the needles are evenly given to two "ears", and then start to weave one of them, close to the sole position of the needle is not retracted, and the other side is knitted to the end of a needle, and finally leave three needles, one ear can be completed.

5.Don't be busy tearing the thread first, the whole upper is double-layered, now start knitting a clone of the ear just now, how to collect the needle just now, how to reverse it back now and put it out, the second layer of one ear is knitted and start knitting the other ear.

6.Both ears are two layers, and then make the second layer of the upper, after weaving the two layers of upper, it is best to find some cloth and stitch it in the middle of the upper, so that the upper of the wool is not easy to get out of shape.

7.After getting the upper and then look at the sole, the pattern is the same, according to the size of the sole, it is slightly smaller than the sole bought, because the wool is an easy stretch thing, when sewing, it is best to add something under the sole, so that it is easier to keep warm.

Please click Enter a description.

The method of novice weaving slippers is to start first, and then weave all the needles, change threads, and decide the number of needles according to the size of the feet, the specific steps are as follows:

2. The first row is knitted with red thread.

3. On the reverse side of the second row, it is still woven under the needle. The first stitch at the beginning of each row is picked up and not woven. When there are 2 stitches left at the end, 2 stitches and 1st stitch. Every time you weave it like this in the future, you can retract a fan-shaped upper.

4. The third row begins to change the thread and weave, 2 needles under the needle and 2 needles to pick the needle. The first stitch is still picked over the reputation of the shirt to not weave. According to the pattern arrangement, the thread is changed from the third stitch. Clause.

First, the second needle is not woven. Change the thread to weave the third and fourth needles, pick up the next 2 needles without weaving, and then change the thread every 2 needles to weave the next needle, and so on all the way to weave the needle. The floating line of the pin is brought through from behind.

5. After weaving the third row, it is still 2 stitches and one stitch in the end.

6. The fourth row is still 2 knitted needles and 2 needles (not knitted). 2. When the needle is not knitted, the floating thread should be pulled over and brought from the front (that is, the reverse side of the upper).

7. The fifth line is changed to the red thread to weave all the needles, starting from this line to add needles, adding needles every four rows (that is, adding needles when weaving the front of the red thread).

8. Add a needle between the second set of red lines and the color line on the right side of the marking point. (That is, add one needle on each side of each side of the 14 needles in the middle) here according to the knitting book of the sweater, the symbol is "o", which is the needle diagram on the right side of the center point.

9. This is the needle diagram on the left side of the center point, and every time the needle is added in this place, there are four groups of red columns in the middle.

10. The sixth row is still knitting the needle, which is where the needle is added in the previous row.

11, weaving a row plus needle, weaving this line, the last two needles are still combined into a needle, to the place of the previous line of needles, here pick three needles do not weave, woolen slippers of the rod needle weaving detailed method and pattern began to add the needle for the second time in the place of the needle pick down four needles do not weave.

12. Decide the number of needles according to the size of the foot. In the end, the remaining 14 stitches are flat, and the upper is 14 stitches on one side (28 stitches on both sides), which is 2 stitches less than the blue side (16 stitches on the blue side, 32 stitches on both sides). Therefore, the upper is a little shorter and a few fewer rows than the blue one.

13. After weaving the upper of the shoe, hook it to the sole, and then hook the short needle at the cuff of the shoe twice. The soles of the shoes are pre-sewn with a pre-sewn thread, and the edges of the woven upper are aligned with this loop and then hooked with a crochet needle.