What causes a standing urinal leak and what to do if the urinal leaks?

There are many reasons for water leakage, it may be a crack in the urinal, or the pipe is not tightly sealed, which can cause the urinal to leak.

There is a set of inlet and outlet device in the water storage tank, the water quality in the north is relatively hard, the water contains a large number of alkaline components, and the scale will be produced after a long time, which is easy to cause the device to be ineffective, so it will leak, you can change a new set or soak the water tank with weak acid to remove the scale, and it will be good naturally.

Your small, your combat power urinal leakage, that must be somewhere on the street, or loose or that you unload, close and unload the pajamas, and see where the water leaks after unloading, and then if you repair it yourself, repair it like this, if you want to find a professional better, he can remove the water pipe professionally, and then remove the leaking place, see where the water leaks or the valve pipe is not strict? He can find the reason, find the reason, and then deal with it.

The reason why the standing urinal is leaking is that there is a crack in the urinal, so it is leaking, so replace the battery quickly.

Do you mean a leaky faucet or a drain floor drain? If the faucet above is leaking, replace it. If it is a leak below, it is more annoying, to remove the urinal, open the floor drain to check the specific leakage, targeted repair. FYI.

If the valve or rubber pad is leaking, you can buy tools or materials to repair it yourself, if the hands-on ability is not strong, it is recommended that you find a hardware master to repair.

Hello, if this problem occurs, please report it to the cleaner on site. Then they'll contact someone to come and fix it. Chances are, someone else threw something into it and shattered it.

The valve is broken or the gasket is broken!!

Let's see if the valve is broken.

It's the so-called dripping water through stones!

It may be that the quality is not very good, so it is leaking.

1. Check whether the flush switch is reset. The plastic flush switch of some flush toilets has been worn for a long time, and occasionally there will be a phenomenon that it cannot be reset, if it cannot be reset, then it can be switched on and off several times, so that it can be reset. There is also to check whether the rubber gasket of the drain port under the ball valve is aging, the sealing is not tight, etc., and if the problem is found, it should be replaced, so as not to affect the use.

2. Check whether the connection between the spherical float of the water tank and the water inlet switch is loose, whether the float is in place and the switch is not closed, resulting in the water inlet does not stop, and the water flows out from the upright drain pipe after the water is full, in this case, as long as the connection between the float and the water valve switch is tightened. If the rubber ball valve of the toilet is damaged, the seal is not tight, and the toilet leaks, then it needs to be replaced immediately.

3. If the toilet tank is leaking, basically there is a problem with the drain valve, so it is necessary to check the rubber plug of the water tank outlet in time. If the rubber plug at the outlet is damaged or blocked by foreign objects, resulting in poor sealing of the rubber stopper, it will also cause the toilet to leak and flow water. If the water supply pipe in the tank is not placed correctly, it may also cause water leakage in the toilet.

The sealing of the interface is important, check the seal and replace it if necessary.

The interface is leaking, and the interface is replaced, which is not troublesome for the person who repairs it.