At the same time as the kitchen uses water, the water flow in the bathroom becomes larger, what s go

Hello, this reason may be that there is air pressure in the pipes, and the water flow in the bathroom is not hindered only when the kitchen water is turned on.

Water heater water passes through the kitchen and then to the bathroom; The water from the first water heater enters the water heater tank and is delivered to the toilet from the water outlet; The water pressure itself is small; When the water in the tank reaches a certain height, the water heater will work, and the pressure will be larger when the water is discharged; At this time, the reason why the water in the bathroom is larger than usual is to check whether the main valve is opened to the end; Check whether there is a foreign object blocking the elbow at the outlet of the faucet in the bathroom, and check whether the filter screen at the outlet of the faucet is a foreign object.

The problem is a bit strange, generally when the kitchen does not use water, the bathroom water flow will become larger, there is no doubt about it, if your current situation is when the kitchen uses water, the bathroom water flow will become larger.

Then I have a simple speculation, under normal circumstances, there is a blockage at this end of the bathroom, there is a blockage in the main road from the kitchen to the bathroom, when the kitchen uses water, the blockage moves to the kitchen with the water flow, then the blockage goes from the small pipe to the large pipe, the water flow in the bathroom increases, and when the water in the kitchen is closed, the blockage moves to the end of the bathroom to cause a blockage, which causes the toilet to be unsmooth. I'm just a simple guess, and I hope you can analyze it yourself based on some of the conditions and current situation on the site.

Kiss! Hello, it's a pleasure to answer your <> for you

Why is the kitchen water very largeThe bathroom water is very small as follows: you unscrew the head of the faucet outlet in the kitchen, there is a splash net inside, it should be the garbage in the pipe blocked on the net, disassemble and clean it and then install it back. Then check to see if the angle valve in the cabinet is not fully opened, or if there is rust inside the angle valve.

A small flow of water in the bathroom and a large flow in the kitchen? The reason is very normal, because they are not walking in a pipe, the kitchen is tap water, the bathroom is secondary water, because of the secondary water war, there are almost no pipes broken, so the water flow in the bathroom is small, if you want the water flow to be large, you have to connect the sanitary wheel with the kitchen water, and the water flow will be large. Hope mine can help you <>

Do you have any other questions? Nothing.

What's the matter with the large water in the kitchen and the large water in the bathroom and the small water in the washbasin and toilet in the bathroom?

Kiss! Hello, happy to answer your <>

The reasons are as follows: first of all, you check whether there is an angle valve in the cold water pipe under the washbasin and kitchen basin is fully opened, if it is fully opened, then check whether there is a filter screen at the faucet mouth of the water wheel, disassemble it to see if there is a blockage, if there is no blockage, whether the amount of water is small in the case of complete cold water, if the amount of water is small, it is a problem of tap water pressure, and the possibility of blockage of the general water pipe is not large. If the water flow is very large after the above inspection, but the hot water is small, it may be related to your water heater settings, and you need to find after-sales service to check the water heater pressure valve and pressure sensing components. It may be that there is a problem with the water pipe in the bathroom, and there is also a virtual energy that the water pipe is blocked with some scale, if the faucet of the outlet pipe can be unscrewed, it can be unscrewed to flush off the scale, if the water heater, the pipe generally has a filter screen at the joint of the inlet pipe or outlet pipe, and there may be scale inside.

Hope mine can help you <>

Do you have any other questions?

I live on the second floor, we can use the water in the bathroom, but the kitchen is slow and there is no water pressure.

My family lives in the second sale of the mill building, we can use the water in the bathroom, the water flow in the kitchen is slow, and there is no water pressure. Solutions to low water pressure:1

The solution to the low water pressure caused by the blockageIn order to remove the low water pressure caused by the blockage in each link, we must clean and dredge each pipe block. Regularly dredge or replace pipelines, medium water tanks, hardware, etc. 2.

The solution to the low water pressure caused by the water pipe is to choose the water pipe diameter formed by the diameter of the water pipe into the room, reduce the loss of the water pipe to the water pressure, and the water pipe should be shortened as much as possible and go in a straight line as much as possible. Perform a hydrostatic test on the newly installed water pipe to ensure that there is no water leakage. 3.

Install a water pump If the water pressure in the home is really too low, human intervention can be carried out. Try adding a booster pump or self-priming pump to the line behind the water meter, which is a very effective visible solution.

This phenomenon shows which is blocked. It's not a leak. If there is a water leak, all the faucets will be affected.

Solution: 1. Check which one is blocked, which needs to be carried out in several steps. Step by step remove, faucet, soft connection, water valve.

2. First remove the soft connection on the water valve, why is this step, in fact, it is for the convenience of unloading. At this time, it should be noted that the water valve must be turned off first, or the consequences can be imagined.

3. Remove the upper faucet, at this time, the soft connection and the faucet can be taken down together.

4. Separate the soft connection from the faucet, check whether the soft connection is completely unblocked, and the inspection method is to blow on the soft connection to see if the ventilation is smooth.

5. Check the faucet, this one must be carefully inspected because there are many types of faucets. My family is the most cumbersome kind, the kind with a shower, it is more troublesome to unload, the general faucet is removed, the faucet out of the water net, to see if there is a big thing blocked inside, and with the wire to see if the faucet valve is blocked.

6. If the soft connection above, and the faucet are no problem, blow the air, and the wire have been tried, then you can only remove the water valve to see, this step has to go to the outside to close the sluice, and then remove the water valve, the valve is very simple, you can see if there is anything inside when you twist it.

There is a filter at the outlet of the faucet, which is twisted down to clean the impurities inside.

I also have the same reason, obviously it is the same water pipe, but there is a different flow of water, and later I found that the faucet with a filter has a small flow of water, I don't know if it is related to the filter.

Practice proved that the filter was definitely blocked, and I removed the filter and found that it was full of small sand grains.

1. The problem of the faucet, 2. Is there a valve in the water supply pipe that is not fully opened.

Hello I am selling sanitary ware, the water flowing out of the faucet is small, the pressure of the water is small, simply put, the kitchen faucet is not directly installed in the water pipe, the hose under the faucet must be installed in the pipe directly into the water.

Unscrew the faucet to check the water flow, the large water flow is the faucet problem, see if there is debris blocking the faucet, and the small water flow is the pipe problem.

It's the problem of the faucet filter, take a wrench to remove it and wash the plastic on the filter, and you're good to go. The water quality is still poor.

If the water pipe is PPR, it's definitely a hot-melt fitting, and you have to cut it off and replace it with a faucet.

Find a master to check it out.

Maybe the faucet is leaking, or maybe the water isn't coming up.

This issue needs to be analyzed on a case-by-case basis.

If this is the case in a newly renovated house, there are two main reasons for it

First, there is slag in the original pipe, resulting in the blockage of the kitchen outlet and faucet, resulting in a small water flow, and the solution is to remove the filter screen at the front end of the faucet and the connection between the hose and the reserved kitchen outlet pipe, and clean the pipe and the strainer; The second is the aluminum-plastic pipe in the kitchen when decorating.

When PPR and other materials are hot-melt welded, the melted part is too much, which occupies too much space on the inner wall of the pipe and causes a small water flow.

If it is an old house, there is no problem with the water flow in the kitchen and bathroom, but later the water flow in the kitchen becomes smallerThe reason for this is that the first of the above is more likely to be dismantled and cleaned.

The faucet in the kitchen at home has been used for a long time, and the water flow has become smaller.