The yellowing of the mobile phone case is very affecting the appearance, why is the mobile phone cas

Updated on number 2024-07-17
11 answers
  1. Anonymous users2024-02-12

    It is also possible that the sweat and substances on the hands come into contact with the phone case for a long time, causing the phone case to turn yellow. Generally speaking, the silicone case is yellow, only the surface of the case is yellow, in this case, it is recommended to go to the store to buy organic solvents to wipe it, or use an oil-free type product to scrub it several times.

  2. Anonymous users2024-02-11

    Because the material of the mobile phone case is a plastic product, it is a very normal physical phenomenon caused by your use, sweat corrosion, oxidation and direct sunlight outdoors.

  3. Anonymous users2024-02-10

    The yellowing of the phone case is due to the fact that in the process of use, its plastic shell will oxidize in the air, so it will turn yellow.

  4. Anonymous users2024-02-09

    The mobile phone case is easy to yellow, and its material is mostly silicone, and the silicone mobile phone case contains a vulcanizing machine, after a long period of use, it will oxidize in contact with the air, and thus turn yellow, plus the sweat and dirt in the hands during use on the shell, it will also cause yellowing. In addition, the phone case is yellowing and ultraviolet rays.

    related, but does not affect the use.

    Reasons why the phone case is yellowing

    nbsp;Most of the time, the yellowing of the mobile phone case is not a quality problem, but because the silicone material is easy to yellow, which is inevitable, but if there are quality reasons for some silicone raw materials, it will also accelerate the yellowing, so when buying, you should also look for quality assurance.

    nbsp;The yellowed phone case can continue to be used, and it will not harden and lose protection, but the appearance is not particularly good-looking, if you don't want to throw it away, you can also use some methods to remove yellow stains, such as usingWind oil essenceOr toothpaste.

    What to do if the phone case is yellow

    Take a piece of cotton cloth, pour an appropriate amount of wind oil essence on it, and then carefully wipe the yellowed phone case back and forth, you can remove the yellow stains to a certain extent, or you can also squeeze the toothpaste on it, clean it with a toothbrush, and then rinse it in clean water, which also has a certain effect.

  5. Anonymous users2024-02-08

    Because the material of the mobile phone case is a plastic product, it will oxidize when exposed to the sun for a long time, resulting in the yellowing of the mobile phone case.

  6. Anonymous users2024-02-07

    Mainly because it has been too long and the phone has weathered; The phone case can be cleaned regularly with a detergent.

  7. Anonymous users2024-02-06

    It is because the phone case itself is plastic, so that our hands touch, sweat to oxidize, and the sun irradiates, so it will turn yellow; We can brush it with a toothbrush or scrub it with alcohol and dish soap from time to time.

  8. Anonymous users2024-02-05

    Tools Ingredients: liquor, white vinegar, water, basin.

    Step 1Prepare a wash basin, put an appropriate amount of water, and put the phone case in it, as shown in the picture below.

    Step 2Pour an appropriate amount of high liquor into clean water, and the liquor has the effect of sterilization and disinfection, as shown in the figure below.

    Step 3Then pour in an appropriate amount of white vinegar, stir well, white vinegar has the effect of softening the dirt and removing the oil, as shown in the figure below.

    Step 4Let the phone case sit in the basin for half an hour, and then wash it repeatedly by hand, as shown in the picture below.

    Step 5Wipe clean with water, as shown in the picture below.

  9. Anonymous users2024-02-04

    Prepare materials: toothpaste, toilet water, water.

    1. Apply toothpaste to the dirty rubber phone case, as shown in the picture below.

    2. Then drip with toilet water, as shown in the figure below.

    3. Apply the toothpaste and toilet water on the phone case evenly, as shown in the figure below.

    4. Leave the phone case with toothpaste and toilet water for 10 minutes, as shown in the figure below.

    5. Finally, wash off the toilet water and toothpaste on the phone case, as shown in the figure below.

    6. As shown in the figure below, the rubber phone case has been washed.

  10. Anonymous users2024-02-03

    Dear, to sum up, the following is the answer for you, hello, the yellowing of the phone case is actually because it has been in contact with the air for a long time, resulting in a layer of yellow stains, and if you want to clean it, you can use baking soda and vinegar to solve it. First of all, prepare a small basin, then put the phone case in it, then sprinkle in an appropriate amount of baking soda and edible salt, then pour a little white vinegar into the water, and then pour a small amount of liquor, the liquor can be sterilized and disinfected. Then pour in warm water, soak the phone case for 30 minutes, and then rinse it with water, so that you will find that the phone case becomes clean and transparent!

    It's okay to ask questions.

  11. Anonymous users2024-02-02

    Reasons why phone cases can turn yellow:

    1. Ultraviolet rays.

    In the process of using mobile phones, they will always be affected by ultraviolet rays, and even solar light can be generated. Ultraviolet radiation plastic makes transparent phone cases yellow, but the yellowing does not affect any utility except for aesthetics.

    2. Sulfides.

    One of the most critical factors in the yellowing of transparent phone cases is because of the sulfide they contain. During the production process of mobile phone cases, there are usually sulfides, which are easily oxidized by the air.

    3. Other factors.

    There are many other factors that affect the yellowing of a phone case. For example, sweat stains, tea stains, and other corrosive substances on the phone case.

    How to clean and whiten the phone case when it turns yellow:

    1. Rinse with water: Dip soapy water on the oily part of the silicone case of the transparent mobile phone, wipe it with a soft cloth to wipe off the stains, and then rinse it with water. Dry the water with a napkin or soft cloth and let it dry in a cool, ventilated place.

    2. Wind oil essence: Wind oil essence also has the effect of removing stains. This is also effective for cleaning phone cases. Apply the swab directly to the stained area and wipe it clean.

    3. Toothbrush toothpaste: There is dust in the cracks of the mobile phone case, so you can use a toothbrush and soap to clean it, but don't use too much force, just brush it once to achieve the effect.

Related questions
12 answers2024-07-17

What are the best phone cases?

6 answers2024-07-17

It is strongly discouraged not to use a knife.

1. The plastic casing, the knife will definitely leave scratches (except for the technical emperor) 2. The metal casing, there will also be scratches, and the sound of metals scraping each other. It's hard to feel that there is wood. >>>More

12 answers2024-07-17

If the phone case turns yellow, you can try the following methods: >>>More

7 answers2024-07-17

Thermal transfer printing is an emerging printing process, which has been introduced from abroad for only more than 10 years. The process printing method is divided into two parts: transfer film printing and transfer processing, transfer film printing adopts dot printing (resolution up to 300dpi), the pattern is printed on the surface of the film in advance, the printed pattern is rich in layers, bright colors, ever-changing, small color difference, good reproducibility, can achieve the required effect of the design pattern, and is suitable for mass production; The transfer processing is processed by the heat transfer machine at one time (heating and pressurization) to transfer the exquisite pattern on the transfer film on the surface of the product, and the ink layer and the surface of the product are integrated after molding, which is realistic and beautiful, and greatly improves the grade of the product. However, due to the high technical content of this process, many materials need to be imported. >>>More

7 answers2024-07-17

1. Polycarbonate.

Polycarbonate is an engineering plastic. >>>More