The farmer s sprayer is broken, and the switch is turned on and does not respond, how to fix it?

Reason one, according to the experience of the seven star farmers who usually use the sprayer, the sprayer is filled with pesticide water, and there is no response when the switch is turned on after the compression, first of all, you must check whether the water in your sprayer exceeds the scale, under normal circumstances, the water level in the sprayer has a warning line, if the pesticide water in your bucket exceeds the warning line, it may lead to insufficient air pressure, and the spray does not respond when the switch is turned on, just a little potion is dripping.

The solution is to take out some of the medicine in the sprayer with a water scoop, put it in another bucket, and then cover the lid to test the pressure spray.

The second reason is that the farmer's sprayer is broken and the switch is not responding, please check whether your sprayer filter has been blocked.

Generally speaking, when spraying pesticides with a sprayer, the water used by everyone in our rural areas is some river ponds and mountain stream water, and there are many impurities in the water.

Solution, take off the filter screen of the sprayer switch, clean it with clean water, if you find that the filter is rotten, replace it with a new one, and then try to pressurize the sprayer to spray the fog, right?

The farmer's sprayer is broken and there is no response when the switch is turned on, please check the air pressure canister on your sprayer.

Generally speaking, the air pressure canister on the sprayer is like a lotus root, which is made of transparent white plastic, and everyone calls it bubbles in the hometown of the old farmer in the countryside.

When you check that the water level in the sprayer does not exceed the warning line, the filter is not blocked, and the air pressure is sufficient, please pay attention to whether the air pressure plastic tank of the sprayer has been broken.

If you can't see it with the naked eye, the old farmer of Seven Stars will teach you a way, after the sprayer is full, take off the plastic can and put it into the water immediately, and see if there are bubbles around the bubbles, if the bubbles are broken, it will definitely bubble, otherwise it is a problem with other aspects of the sprayer, right?

Therefore, the old farmer of Seven Stars personally believes that the farmer's sprayer is broken, in the case of normal water level and air pressure, there is no response when the switch is turned on, and the filter in front of your sprayer switch will definitely be blocked by impurities, and the solution is to immediately take off the filter and clean it, and reinstall the pressurized spray!

You can turn on the spray head yourself, and then do a simple dredging and cleaning, which can generally be repaired and perfected.

The farmer's sprayer is broken, and the switch is turned on and does not respond, how to fix it?

Hello friend, the damaged switch of the sprayer that can be used is not responded to, this is the need to disassemble the relevant bottom sitting. First, in this case, you need to disassemble the rear base first to see if the battery has electricity? If the battery is out of power, you need to charge the battery or replace the battery.

The second is that if the battery is fine, measure whether the relevant switch is normally on? If it is not turned on, replace the switch. Third, if the switch is normally turned on and the battery is electrified, then the old cavity is the problem of the motor, and the motor needs to be replaced.

Summary. For the case that the electric sprayer is broken, here are a few steps to try to fix:1

First, confirm that the power supply is connected properly. Check the plug and cord for damage, and make sure there is power at the outlet. If it's a battery-powered sprayer, make sure the battery is fully charged or replace it with a new one.

2.Check if the nozzle is clogged. The nozzle may become clogged due to not being used for a long time, and the nozzle can be soaked in warm water or detergent for a period of time and then cleaned with a soft brush.

3.Check the tubing of the sprayer. It may be that the pipe connection is not strong or the pipe is blocked, causing the sprayer to not work.

Check all connections and make sure they are tight. Use the appropriate tools to clear the blockage. 4.

If none of the above methods solve the problem, it is recommended to seek help from the manufacturer or after-sales service center. They may be able to provide more professional repair advice or provide repair services. Please note that the above is only general advice and specific fixes may vary depending on the brand and model.

Before performing any repairs, make sure you have disconnected the power supply and follow the relevant safety guidelines.

For the case that the electric sprayer is broken, here are a few steps to try to fix:1First, confirm that the power supply is connected properly.

Check the plug and cord for damage, and make sure there is power at the outlet. If the socks are battery-powered sprayers, make sure the battery is fully charged or replaced with a new one. 2.

Check if the nozzle is clogged. The nozzle may become clogged due to not being used for a long time, and the nozzle can be soaked in warm water or detergent for a period of time and then cleaned with a soft brush. 3.

Check the tubing of the sprayer. It may be that the pipe connection is not strong or the pipe is blocked, causing the sprayer to not work. Check all connections and make sure they are tight.

Use the appropriate tools to clear the blockage. 4.If none of the above methods solve the problem, it is recommended to seek help from the manufacturer or after-sales service center.

They may be able to provide more professional repair advice or provide repair services. Please note that the above is only a general recommendation and the specific repair method may vary depending on the brand and model. Before performing any repairs, make sure you have disconnected the power supply and follow the relevant safety guidelines.

Can you add, I don't quite understand it.

Steps to fix your electric sprayer:1Check the power connections, plugs, and power cord to make sure the outlet is charged.

If it is battery-powered, confirm that the battery is fully charged or replace it with a new one. 2.Check whether the nozzle is blocked, soak the nozzle in warm water or detergent, and clean it with a soft brush.

3.Check whether the pipe connection is firm and clear the blockage. 4.

If the problem is still not resolved, contact the manufacturer or after-sales service center for assistance. Note: The specific repair method varies depending on the brand and model, please turn on the power of the rotten hall first and follow the safety guidelines of rolling down.

Summary. Hello dear, glad to answer for you! The answer I have found for you is:

If it is only closed and cannot be stopped, it may be caused by damage to the pressure switch or water leakage. 1Remove the switch, break the two wires in the back, and see if the sprayer can stop working2After removing the sprayer switch, the sprayer is still working, which means that there is a short circuit in the line.

Hello dear, glad to answer for you! The answer I found for you is: If it is only closed and cannot be stopped, it may be caused by damage to the pressure switch or water leakage 1

Remove the switch, cut off the two wires at the back, and see if the sprayer can stop working and starving limbsAfter removing the sprayer switch, the sprayer is still working, which means that the line has a short circuit.

Most of them are stuck or clogged in the switch of the sprayer.

Kiss Take it apart to change it to a switch

Summary. Hello, I am your exclusive technician, attentive, careful, dedicated to answering your car questions, for you to find the corresponding problem solutions and solutions! According to the electrosprayer no water, it will burn out if it is accidentally opened, and the answer to the question is as follows, as long as it is turned on and turned off in time, it will not be damaged, if it is opened, it will always work, and when it does not work, there is no sound in it, and it stops, and the motor inside is burned, which burns out.

It is recommended that you add water to try, if you can run the work will be fine, otherwise you need to overhaul and repair the electrosprayer, the car master will serve you wholeheartedly, I hope my answer can help you.

Hello, don't worry, I can ask for your question, but wait a minute, I need text for about 2 minutes.

Hello, I am your exclusive technician, attentive, careful, dedicated to answering your car questions, for you to find the corresponding problem solutions and solutions! According to the electrosprayer without water, it will burn out if it burns out, and the answer to the question is as follows, as long as it is turned off in time after it is opened, it will not be damaged, if it is opened, it will always work, and when it does not work, there is no sound inside, and it stops, that is, the motor inside is burned, and it burns out. It is recommended that you add water to try, if you can run the work will be fine, otherwise you need to overhaul and repair the electrosprayer, the master of the car inspection and car will serve you wholeheartedly, I hope my answer will help you without a posture.