What should I do if the porcelain powder on my wall falls off the wall?

Whether it is in the warranty time, ask the gray master to help. Sanding the old wall surface layer before working.

That's the responsibility of the construction team, you should hit ** to let them warranty!

Tiles can decorate or protect walls, and they are also easy to clean. Like the kitchen and bathroom, all tiles are generally pasted, which can avoid oil smoke and water vapor adsorbed on the wall and stain the wall, and if it becomes dirty, it can also be cleaned in time. So what to do when the wall paint off the tiles when painting the wall?

1. When the paint just drips onto the smooth surface of the tile, it should be solved as soon as possible. At this time, you should know that the paint used in home decoration is latex paint. Whereas, latex paint is easily soluble in water.

Simply wipe the paint with a damp cloth, do not use chemical cleaners or scrape the paint with a spatula. Otherwise, it will affect the gloss of the tile surface.

2. If the time is a bit long, you can apply some vinegar to the car paint, and wipe it repeatedly with a dry rag after 10 minutes. After removing the paint, wipe it with a damp cloth. Or you can use commercially available cleaners.

Or apply a mixture of soapy water and a small amount of ammonia and turpentine to the paint. Then after 10 minutes, wipe with a dry cloth.

3. If the paint on the tile is completely dry, wipe it with a special cleaner or sneaker stain remover. It is also possible to use a drawing eraser to clean, but this only works with a small amount of paint. Be careful not to use corrosive chemicals. Failure to do so will damage the glaze of the tile surface.

It's going to drop. Latex paint can be brushed on the tile, but when brushing the latex paint, you can't add water or only add less water, because the surface of the tile is very smooth, and the latex paint prepared with water is easy to flow downward. Not only is the viscosity not enough, but also the hiding power is not strong, so it can not be mixed with water during construction, and it needs to be applied twice, and the second time can be brushed after the first time it is dry.

1. The daily cleaning of tiles can be cleaned with detergent and soap.

2. Clean the tiles with soap and a little ammonia and turpentine mixture to make the tiles more shiny.

3. Polished tiles should be waxed regularly, with an interval of 2-3 months.

4. If there are scratches on the brick surface, you can apply toothpaste to the scratches and wipe them with a dry cloth to repair them.

5. Use detergent to remove the dirt in the gaps between the bricks from time to time, and then brush a layer of waterproofing agent on the gaps to prevent mold breeding.

6. Sodium hydroxide or potassium bicarbonate solution is used for pollutants such as tea, coffee, beer, ice cream, and oil.

1.If you're connecting walls and tiles together, you'll need to find a clean sink and put it in the sink. Then wait for a few minutes before taking it out and wiping it down.

2.In addition to the good things, it is best to use professional tools such as rags, detergents, toothpaste and soap to clean the tiles.

3.You can use sandpaper, fine sandpaper or steel wool balls to wipe the tiles for cleaning purposes. However, note that no matter which method you use, you must ensure that it is completely dry.

4.When they are cleaned, dust adheres to the tiles, so they can only be wiped gently.

5.It is recommended to use charcoal to absorb moisture and prevent discoloration and mildew of the tiles.

1. The treatment of the wall and ground base is not clean, the watering wetness is not enough, and the floating dust on the back of the tile is not cleaned, which will lead to the poor bonding between the tile and the wall, and it will loosen and fall off after a period of time. 2. The quality of the tile is not good, and the water absorption rate is not good, which also affects the firmness of the paste. 3. During the construction, if the cement mortar of the cushion is too thick or the cement is added too much water, the tiles will fall.

4. The water absorption rate of the inner tile is low, if the tile is not completely attached to the cement, it is subject to a larger impact or is hit by a hard object, which is easy to cause the separation of the tile and the cement, and the bottom of the brick is hollow. Related knowledge development materials: 1. Tile selection:

When choosing tiles, you must choose qualified tiles, the water absorption rate of tiles is one of the main reasons for the tile to fall off, and the tiles must be cleaned when using tiles, and can only be used after soaking and drying overnight. 2. The mortar should be full when pasting tiles: if there is too much mortar when using mortar, it will cause the tiles to be not easy to stick flat when pasting, and if you knock too much, the water will be concentrated at the bottom, and a hollow drum will be formed when collecting water.

3. When pasting tiles, it is best to survive at one time, if you are hyperactive, it is easy to destroy the original adhesive structure, and it is easy to fall off if there is a hollow drum after drying.

Dear, hello, it's an honor to have your problem, the solution to your problem is as follows: It will definitely fall, and the advantage of scraping sail porcelain powder is that the cost is lower than that of Jinwushu, the construction speed is relatively fast, and it is very easy to repair. The disadvantage is that the surface is prone to small cracks after a period of time.

Porcelain powder is low cost, fast construction and easy to repair. After a long time, the powder will fall off when you touch it with your hands, and it is easy to stick to your body. Although porcelain powder can also scrape the wall, it can no longer use latex paint after use, because it can not be well adsorbed on latex paint, so it lacks decorative expansion.

1. First of all, you need to shovel off the wall skin on the top of the wall, if it is a small area of porcelain powder on the top of the mold wall, you will fill this range with putty. 2. If the porcelain powder on the top of the wall falls off in a large area, the original putty needs to be removed, the cement wall surface is exposed, and then the wall surface is polished and smoothed, and the top of the wall is repainted. 3. When painting the top of the wall, it is necessary to reinforce the top of the wall with a reinforcing agent to make the base more trembling and firm.

4. Add some white glue to the water, then add some powdered putty, use a tool to evenly apply the adjusted putty to the wall, and ensure the flatness of the wall, and finally apply latex paint, you can repair the top of the wall that has fallen off. Related knowledge popularization: 1. The whitewashed paint should be suitable for the material of the base layer, otherwise there is a conflict between the two, and the paint cannot be well combined with the material.

2. The viscosity of putty is very important, and you need to buy putty containing glue when buying putty. 3. After a long time, the wall will have some problems due to external factors, such as cracks, falling off, etc., so it should be maintained regularly. 4. When painting the wall, you can't cut corners, and you must do enough for every step and every process, so that the quality can be guaranteed and the use time will be extended.

5. When renovating, it is necessary to remove the paint that was brushed before.