Can radiators be installed and how to install radiators?

1. Radiators can be installed. 2 But it is not arbitrary to install, it needs to be approved by the heating company before it can be installed, and it cannot be changed privately, and it is not a simple matter to install radiators.

After-sales: the biggest problem caused by changing the radiator without permission, that is, the after-sales problem of the radiator, when buying the radiator, the seller explained that the radiator will not be after-sales if it is changed privately, so the radiator will not be able to get the radiator after-sales after changing the radiator without permission.

2.Quality: After changing the radiator privately, the quality of the radiator is not graspable, although the radiator is a private change is very simple, but there are still technical requirements, and the private change of the radiator is generally invited some radiator installation workers, and some of these workers just know how to install the radiator, and do not know about the private change of the radiator, so they can not grasp the quality of the private change.

3.Location: After changing the radiator without permission, many heating users do not choose the location of the radiator demand in the location selection, but choose the location according to the aesthetics of the family, which leads to the error of the radiator installation position, and after the radiator is installed incorrectly, it will inevitably affect the heat dissipation performance of the radiator.

4.Heat dissipation: The radiator heating system is a balanced system, and after the private change, the balance of the radiator heating system will be destroyed, so that the radiator heat dissipation will be greatly affected.

5.Water leakage: After the radiator is changed privately, it will leak due to the connection, so heating users must also prepare how to deal with radiator leakage.

Private reform is absolutely not feasible. If the radiator at home is broken, of course, it can be replaced and repaired. However, if you install radiators in your home without permission and your own and other residents' homes are not hot, you will be responsible for maintaining the affected home radiators.

If you install radiators in a space that has been renovated without permission, you may face forced removal by law enforcement or pay the gas company the difference in heating bills.

Tutorial on installing radiators! The plumber explained the installation method in detail, and he was no longer afraid of the cold in winter.

The best way to install the newly installed radiator is to install it nearby, that is, to install a three-energy in the original radiator inlet and outlet, and directly drag and hang two groups of radiators, so as to effectively avoid the impact on the environment caused by the open pipe; If it is said that it must be installed in another place, it can only be done through the open pipeline, and the following requirements must be observed:

1. The interface installation is not standardized: in the installation of radiators, hot melt pipes are now mostly used, and the welding requirements are horizontal and vertical, and the interface is standardized to ensure the installation quality and ensure the normal heating in the later stage;

Second, the quality of accessories is also important: for the accessories in the installation of radiators, its quality and radiators are also important, just imagine, if the pipe fittings or valves leak, can we still use the radiator for heating? As long as there is a water leak, it will definitely affect our heating, so the quality of accessories and radiators is equally important;

Confirm the integrity of the radiator packaging before installation, adopt corresponding shockproof and anti-collision measures when placed, and the radiator cannot be dragged in any way, and the radiator should be stored in a dry and rainproof safe place. The site should be cleaned up, and the valves, main pipes, branch pipes and pipe branches and hangers of the heating system have been installed and the pipeline flushing and pressure test has been completed according to the design requirements.

Radiators are more common in northern cities, if there is no heating indoors in winter, the winter is very difficult, which will bring great inconvenience to life, but there is often a phenomenon that the heating is not hot, many people think that it is because there are fewer radiators, and they want to install them, so can the radiators be installed? Let's take a look.

1. Can radiators be installed?

Radiators can be installed, but not at will can be installed, need to be approved by the heating company to be installed, can not be changed privately, and the installation of radiators is not a simple matter, need to have professionals to measure the appropriate before installation, the installation of radiators for water pressure, installation location, etc. are strict requirements, installation can not be too much, otherwise it will affect the overall water circulation, but cause the radiator not to be hot.

2. How to judge whether to add radiators.

1. Judge according to the indoor area.

When installing radiators, it is necessary to calculate the area of functional areas that need to be heated such as bedrooms, living rooms, dining rooms, bathrooms, kitchens, etc., as basic data, because the heating area is multiple of the indoor use area, mainly to consider the heat preservation of the room, so the heating area must be larger than the use area.

2. Judge according to the wattage.

Generally speaking, the installation of radiators is based on the heating area to calculate the wattage, the average square meter of heating area needs 60-80w heat supply, at this time you can use the heating area to multiply the heat supply required per square meter to calculate.

3. Judge according to the number of pieces.

After calculating the total heat supply required by the room, you can calculate the number of radiators needed, generally speaking, the radiators are calculated according to the number of groups, and the number of radiator groups is also fixed, which cannot be split or combined, so it must be calculated clearly before installation.

Summary: The above is the introduction of can the radiator be installed, I hope the content shared can give you some reference, if you want to know more about related knowledge, you can **** Qeeka Home information.

1. Radiators can be installed.

2. But it is not arbitrary to install, it needs to be installed after the consent of the heating company, and it cannot be changed privately, and it is not a simple matter to install radiators.

3. It is necessary to have professionals come to the door to measure the appropriate before it can be installed, and the installation of radiators has strict requirements for the high water pressure difference and installation location, and the installation can not be too much, otherwise it will affect the overall water circulation, but cause the radiator to not be hot.

When installing radiators, it is necessary to calculate the area of the bedroom, living room, dining room, bathroom, kitchen and other functional areas that need to be heated as the basic data.

Radiators are more common in northern cities, if there is no heating indoors in winter, the winter is very difficult, which will bring great inconvenience to life, but there is often a phenomenon that the heating is not hot, many people think that it is because there are fewer radiators, and they want to install them, so can the radiators be installed? Let's take a look at it with me.

1. Radiators can be installed.

2 But it is not arbitrary to install, it needs to be approved by the heating company before it can be installed, and it cannot be changed privately, and it is not a simple matter to install radiators.

3. It is necessary to have professionals come to the door to measure the appropriate before it can be installed, and the installation of radiators has strict requirements for water pressure, installation location, etc., and the installation can not be too much, otherwise it will affect the overall water circulation, but cause the radiator to not be hot.

When installing radiators, it is necessary to calculate the area of functional areas that need to be heated, such as bedrooms, living rooms, dining rooms, bathrooms, and kitchens, as basic data.

The following matters should be paid attention to when installing radiators:

1. On-site disclosure: At the installation site, the construction personnel will pave the plastic mold judgment film, and Li Qin will do a good job of on-site protection.

2. Mark the location of the hole: The on-site construction personnel will help the owner dismantle the ceiling and observe the best opening position.

3. Hole-making: It is inevitable that there will be mud water when making a hole, which is washed but professional construction will achieve good protection.

4. Installation of the host and thermostat: according to the actual situation, install the host and thermostat in the most suitable position.

5. Heat sink installation: Installing a heat sink in the room is also the terminal of the whole system.

6. Water pipe laying: Water pipe laying is a very important step in the whole system.

7. Connection system: After the system is connected, the installation process is completed, and then the final debugging is done.

8. Debugging: Workers will exhaust the air in the radiator and start to use and debug the effect.

9. Completion sign: After the construction is completed, it will also help the owner restore the furniture and kitchen and bathroom ceilings.

The installation of radiators has gradually increased, and the heating effect is very good. Radiators dissipate a lot of heat rather than a small one. For many people, this question is easy to get wrong.

Rural houses have poor thermal insulation. This is due to the fact that the windows of rural houses are large, the glass is very ordinary double glazing, and the structure of the windows is also ordinary. In addition, the bedrooms of rural units are relatively large and there is no thermal insulation on the walls, so traditional design considerations cannot be considered when calculating the heat load of the space.

For example, this time I calculated the heat load on the basis of 180 watts of square meters, compared to 130 watts of square meters for the conventional calculation.

Try to place the radiator under the window. The placement of radiators is also very special, many users think that radiators should be placed next to the bed and should work well, but in reality this may not be the case。When placing radiators, try placing them under or in front of a window.

As mentioned earlier, since the window is where the whole cold air gets in the most, the radiators are placed here, which will create a hot air barrier here. It is also best to prevent cold air from entering and reduce heat loss in the room. Try to use dual pipes as much as possible, and try to use dual pipes in the same way as much as possible.

Currently, the connecting pipes of radiators use double pipes parallel to different paths. If the number of sets of radiators is more than 6 sets, the best way to use dual pipes in the same path is recommended. Although the same line of two-pipe piping material requires more use, it is possible to make each set of radiators heat at the same rate.

The radiator should be equipped with an automatic temperature control valve switch. Because bedrooms are scattered in rural areas, it's definitely not the best way to design a mainframe thermostat. In addition, if the return water temperature is not well controlled, because the pipe is too long, it will bring a large deviation.

Therefore, we must install an automatic temperature control valve on each radiator, which automatically senses a specific indoor temperature and controls the opening and closing of the radiator according to this temperature. In addition, with this valve switch, in order to prevent the number of openings in the radiator from being too small, the water flow will affect the operation of the wall-hung boiler, so it is necessary to pay attention to this problem.

The water supply temperature should be set at about 70 degrees as much as possible. Due to the low temperature in rural areas, the house structure is not well insulated, and the heat loss is large, so when setting the water supply temperature as much as possible, it is enough to set it at around 70 degrees. Of course, the insulation properties are different for each house type and can be gradually reduced over the course of use.

The temperature of the water supply is also possible.

The installation method of radiators is generally that when opening the package, please carefully check whether the radiator model, color, and accessories in the package are complete. It is better not to install radiators from the geothermal pipes. Especially if there is no branch small valve on the lower bar of the water separator, do not carry out this operation.

This is because this hybrid installation is not conducive to the exhaust of geothermal and heating exhausts. In the state of the two connections, the gas in the floor heating pipe and radiator cannot be completely discharged.

The installation of radiators involves the distribution of pipes, and if the design is not good, the home will be full of exposed pipes, which requires the designer to make a plan according to the situation. Generally speaking, the positioning, size and direction of the heating equipment and the direction of the pipeline should be as concealed and reasonable as possible, and the pipeline system should be arranged as far as possible in the position of the corner line and the baseboard, the more concealed the better, and at the same time take into account the original decoration.

The normal installation of radiators should be operated from between the main control valve of the geothermal water separator and the outdoor household valve. Insert tees in this section and extend the ducts into the room where you want to add radiators.

The advantage of this is that the geothermal heat and heating can be separated for repair and maintenance. In addition, during cleaning, it is not possible to carry out a thorough cleaning operation due to the mutual interference of the pipes.

The installation of radiators is gradually increasing, and the heating effect is very good. The radiator dissipates a lot of heat, not much at all. For a lot of people, this question is easy to go wrong.

Rural houses have poor thermal insulation. This is because the windows of rural houses are large, and double glazing is very common, and the structure of the windows is also common.