The bathroom is renovated, how to increase the height of the faucet 20

Updated on home 2024-07-03
6 answers
  1. Anonymous users2024-02-12

    Do the math how much it will cost you to renovate your home

    If the faucet needs to be heightened after the bathroom is renovated, there are several ways:

    It is possible to increase the height externally, that is, to use an elbow to connect the middle pipe inside the wall, but this will result in a deterioration of the overall aesthetic effect.

    You can also choose a slightly longer metal hose and attach it to the original faucet.

    Alternatively, use a gooseneck faucet, which can also be used to increase the height.

    The most straightforward way is to tear down the walls and extend the water pipes, but this will increase the budget.

    When decorating bathroom water pipes, try to deal with the details to avoid the above troubles. Such as:

    1. Before installing the toilet water pipe, check whether the pipes and fittings are damaged. When arranging the sewer pipe, it is necessary to look at the installation location of the faucet of the washing machine at home, as well as the arrangement of the sewer pipe.

    2. Pay attention to the installation of water pipes when decorating bathroom pipes, and the best and safest installation position of water pipes is the top. If the water pipe is installed underground and buried underground, it will be difficult to detect the problem once the water pipe breaks and leaks.

    3. The thickness of the wall tiles should be considered when installing the toilet sewer. Install as little or no connectors as possible under the ground and on the wall to reduce the potential danger of water leakage. If installation is required, make sure that the connection is secure and that there are no leaks.

    Enter the area and get the decoration for free**].

    Enter the area and get the decoration for free**].

  2. Anonymous users2024-02-11

    If the original faucet is too low, just choose a longer metal hose.

    If you want to increase the height of the sink spout, you can choose a gooseneck faucet.

  3. Anonymous users2024-02-10

    First figure out why you want to increase the height, do you have to increase the height?

    If it is necessary, it also depends on the position of the current faucet and the position that needs to be heightened.

    External heightening: Use an elbow to connect the pipe in the wall, bend it up to the position you need, and then connect the faucet with an elbow, so that the fixation and aesthetics of this section of the pipe should be considered.

    It is best to modify the inside of the wall and renovate it locally.

  4. Anonymous users2024-02-09

    The problem is not clearly described in the first place!

    If you want to be beautiful, then break the wall, and if you want to be simple, then add an elbow to connect the pipe!

  5. Anonymous users2024-02-08

    Hygienic faucets can be installed at high heights...

    If it is tap water, the tap water has a certain pressure, and it is completely possible to install water connection at a high place.

    For example, the sprinkler head in the bathroom is generally higher than the original installed water pipe, and it still has water flowing out. Another example is the flowers and plants planted on the roof, which need to be sprayed with water, and many residents use a hose to spray the flowers and plants on the indoor faucet.

    This can also prove that a faucet with good hygiene can be installed at a high level.

  6. Anonymous users2024-02-07

    Generally, the height of the faucet water will be reserved before decoration, so that it is convenient to install the bathtub in the later stage. Look at what the landlord said; "After the current decoration and installation of the bathtub, the faucet is invisible, and it should be hidden under the bathtub." A small tip for the landlord:

    1: General independent bathtub If you press the faucet on the wall (note: the water on the wall), you can find a way to use a pipe to raise the faucet water.

    It can be about 700 above the ground. It is not easy to be too high or too low; 2: You can choose the floor faucet, the water of the floor faucet is at the bottom of the faucet base, which is very convenient to press.

    The landlord said that he had purchased a press-fit bathtub, and you can use both methods. It depends on what kind of bathtub you buy.

Related questions
10 answers2024-07-03

It's also hard to clean the bathroom in my house, and as a housewife, solving this kind of thing is my strength. That's why I recommend you clean them up like this. >>>More

16 answers2024-07-03

Generally speaking, how to place the faucet in the bathroom should take into account the specific layout of the bathroom to avoid unnecessary waste of space resources. At the same time, when installing the faucet, you should take into account the specific location and use scenario to avoid unnecessary trouble for yourself, so you can try the following aspects to think about the problem. <> >>>More

11 answers2024-07-03

Under the wall and the ground, it is used as little as possible or does not need to connect accessories, and the eldest daughter's house is only installed with one and the other is not installed, and the uninstalled bathroom is really a little smelly! It doesn't stink, anyway, the air smells like a closed little waterway! This reduces the risk of leakage and ensures that the fitting is installed securely and without leakage. >>>More

17 answers2024-07-03

Bathroom waterproofing should be done well.

In addition to the basic waterproof work, the bathroom leakage is mainly the junction between the ground and the wall, which should be dealt with urgently, leaving no dead ends, and the waterproofing of the wall is best to be 180mm, which can not only eliminate water leakage, but also prevent water from wetting the wall. >>>More

18 answers2024-07-03

In fact, many people will have such a question, that is, when decorating the bathroom, how should the pre-installation look better. In fact, when collocation, you should also pay attention to be consistent with the overall style. If our own bathroom is in the Nordic style, then when matching the bathtub, we should choose some simpler styles. >>>More