What should I do with the refrigerator before I buy it, and whether the protective film should be re

The protective film is applied to avoid scratches on the machine during transportation, and the protective film can be torn off or left on the machine, which has basically no effect on the heat dissipation of the refrigerator.

As the name suggests, the protective film is set up to protect the refrigerator from being harmed in the process of production and transportation.

The two sides should be torn off, and if the front one is a steel plate and has a membrane, it is not recommended to tear it off; If the protective film is attached to the side of the refrigerator, because the side is used for refrigeration and heat dissipation, then because of the existence of the film, the heat dissipation effect will decrease to a certain extent, then the refrigeration process will be prolonged, and the power consumption will increase slightly. Therefore, the protective film on both sides of the refrigerator should be torn off after it is placed in a fixed position.

Let stand, clean, diffuse.

The protective film on the refrigerator door can be removed without tearing off.

If the condenser of the refrigerator is on both sides of the refrigerator, it must be torn off, otherwise it will affect the ventilation and heat dissipation of the refrigerator.

Common sense of refrigerator use:

1. After the new refrigerator is purchased, it should be wiped several times with a clean rag, but do not close the door after wiping it clean, and open the door to let the odor inside dissipate before powering it on.

2. After the new refrigerator is carried back, it should be left to stand for a few hours before powering on the test.

3. The refrigerator should be placed in a cool and ventilated position, and a certain amount of space should be left around it to facilitate the ventilation and heat dissipation of the refrigerator and improve its refrigeration efficiency.

4. When the machine is powered on, the temperature setting of the freezer should be adjusted at minus 18 degrees, and the temperature of the refrigerated room should be about 5 degrees. The mechanical thermostat should adjust the size of the digital gear according to the ambient temperature of the season, adjust the smaller digital gear in summer, adjust the middle gear in spring and autumn, and adjust it in the larger digital gear in winter.

5. When the machine is powered on, do not put in the food first, wait for the temperature in the refrigerator to drop and stabilize, and then slowly put in the food after the compressor starts and stops normally, and do not put too much food at one time to avoid overload of the compressor.

6. The food placed in the refrigerator should be sealed and wrapped in a container or food bag to avoid odor caused by mutual odor.

You can first tear off, except for the protective film on the panel, temporarily leave it for 24 hours, and then, turn on the refrigerator to check the use of the refrigerator. In order to find out whether there is a problem of poor quality in time!

Where the heat dissipation is affected, you can tear off the protective film, and other parts, as long as you don't feel that the protective film is ugly, you can take it. Just send it over and don't turn it on for 24 hours, wait for the coolant to flow back.

If you buy a new refrigerator, you should have the film off the outside. The film of the refrigerator shell is used to protect the shell from scratches during production and transportation. When using, you need to tear off the film, otherwise it will affect the normal heat dissipation of the refrigerator and increase power consumption.

Note that when placing the refrigerator, do not fill the bottom with flammable materials such as cardboard or styrofoam, and even if you buy a new refrigerator, you must remove the packaging material at the bottom of the refrigerator. Do not plug things in the back of the refrigerator, especially do not plug flammable materials, this is the main heat dissipation channel of the refrigerator, and plugging things will prevent it from dissipating heat and shorten the service life. The rear of the refrigerator generates a lot of heat or radiation, and if flammable materials are stuffed, it is likely to cause a disaster.

If there is, tear it off except for the top one that can be retained. The better the fridge dissipates heat, the better its cooling effect will be. According to the brand or model, the location of the heat sink of the refrigerator is different, and if the protective film of the new refrigerator is not removed in time, its heat dissipation function will be seriously hindered when used, and then the refrigeration effect of the refrigerator will be affected, and the protective film of the new refrigerator will also affect its appearance.

To protect or care for your refrigerator, you can often wipe its appearance with a cotton cloth to keep it looking new. After a long period of use, the surface stains of the refrigerator can be removed with neutral detergent mixed with water, but it cannot be cleaned with strong substances such as sulfuric acid or gasoline, and hard objects such as knives and shovels can not be used to scratch the surface stains.

When using a refrigerator, you should also pay attention to: do not open the door ordinarily, it should be turned off as soon as it is used; The temperature regulation in the refrigerator is also very particular, that is, the temperature adjustment switch should be adjusted to even the lowest when used in winter, because it is easy to cool down in winter. On the contrary, in summer, depending on the amount of refrigerated or frozen goods, the switch should be adjusted to 3-4 gear (depending on the model), and it is difficult to stop if it is switched to winter mode.

Do I need to remove the protective film in the refrigerator? The protective film needs to be removed.

The protective film behind the refrigerator is directly attached to the heat dissipation net, which will affect the heat dissipation of the refrigerator, waste electricity, and shorten the service life of the refrigerator, so the protective film here must be torn off. The protective film in other positions should also be removed, because this kind of plastic film does not have a long shelf life and is easy to age, and it is difficult to tear off once it is aged.

Protective film effect:

Usually, the film on the surface of electrical appliances is used to protect household appliances from friction and scratches during handling, and also to avoid contamination of the surface of electrical appliances, so this film is a protective film for household appliances. Because of its protective effect, many families will retain this layer of plastic film when using household appliances.

In fact, in addition to the protective film of household appliances, it is best to tear off, many other items with plastic protective film are the same, the protective film is only for factory protection, you can tear it off when you use it, and the sooner you tear it, the easier it is to tear it off.

The protective film on the refrigerator needs to be removed. Because the protective film will affect the heat dissipation of the refrigerator, waste electricity, and shorten the service life of the refrigerator, the protective film is only for factory protection, and it is recommended to tear it off when you use it.

The protective film on the refrigerator needs to be torn off, because the protective film will affect the heat dissipation of the refrigerator, waste electricity, and shorten the service life of the refrigerator.

No need to tear.

The Buddha said: People have eight sufferings, birth suffering, labor suffering, sickness suffering, death suffering, resentment and bitterness, love and separation suffering, seeking no suffering, and the five aggregates are full of suffering. Only when the body and mind are emptied, can people leave the difficulty, it is difficult to leave the body, and all disasters will turn into dust.

The protective film of the refrigerator should be torn off after it is bought and energized, otherwise, it will affect the heat dissipation.

1. You can blow the protective film with a hair dryer first, but you can't adjust the temperature to a high level, you must use a low temperature to blow. At the same time, the distance should be controlled during the blowing process. When the protective film is heated and expanded, it can be easily removed.

2. You can also sprinkle some ice water on the protective film, wait for a few minutes, and you can slowly tear it off.

3. You can also apply some wind oil essence on the edge of the refrigerator protective film, and wipe it with a wet towel on the edge after a while, and you can easily tear it clean.

4. For new refrigerators, the protective film on the surface needs to be torn off after buying. Because if it is not torn off, it will affect its heat dissipation function. The reason why a protective film is attached to the surface of it is mainly to prevent the surface of the refrigerator from being scratched during transportation.

The reasons are as follows: 1. The function of the film of the refrigerator shell is to protect the shell from scratching during production and transportation. When using, you need to tear off the talking film, otherwise it will affect the normal heat dissipation of the refrigerator and increase power consumption.

2. The refrigerator relies on the metal heat dissipation of its box, the protective film on the side will affect the heat dissipation of the refrigerator if it is not torn off, and the protective film on the front door can prevent the outside of the refrigerator door from being accidentally scratched, and the heat dissipation of the refrigerator has nothing to do with the refrigerator door.

Precautions for refrigerator maintenance.

1. The refrigerator should be cleaned regularly (at least twice a year). When cleaning the refrigerator, first cut off the power, use a soft cloth dipped in water or dish soap, scrub gently, and then dip it in water to wipe off the dish soap.

2. In order to prevent damage to the outer coating of the box and the plastic parts inside the box, do not use washing powder, detergent, talcum powder, alkaline detergent, Tianna water, boiling water, oil, brushes, etc. to clean the refrigerator.

3. When the accessories in the box are dirty, they should be removed and cleaned with water or detergent. The surface of the electrical parts should be wiped with a dry cloth.

4. After cleaning, plug in the power plug firmly and check whether the temperature controller is set in the correct position of the dust socks.

5. When the refrigerator is not used for a long time, the power plug should be unplugged, the inside of the box should be wiped clean, and the door of the box should be closed after the box is fully dried. <>

The protective film on the outside of the refrigerator should be removed.

If it is not torn off, it will affect the heat dissipation effect of the refrigerator, waste electricity, and shorten the service life of the refrigerator. Also, the refrigerator should be cleaned regularly. When cleaning, you can wipe it with a clean rag to prolong the life of the refrigerator.

Causes of freezing in the refrigerator crisper compartment:

1.The process of frost flowers.

Due to the high temperature in summer, if the refrigerator door is opened and closed frequently, a temperature difference will be formed in the refrigerator, so that the water vapor around the refrigerator will quickly cool, resulting in frost inside the refrigerator. If the frost cannot be treated in time, a layer of ice will form in the insulated room of the refrigerator after a long time.

2.The food is too close to the inner wall.

Putting food in the refrigerator will bring the food too close to the inside of the refrigerator because the inner liner of the refrigerator wall is closer to the condenser, which will freeze the refrigeration pipes of the refrigerator, causing the crisper compartment to freeze.

3.The thermostat in the refrigerator crisper compartment is not adjusted correctly.

If the refrigerator's thermostat is set in the wrong position, it can easily cause the refrigerator's crisper compartment to freeze.

Summary. 1.If the refrigerator protective film can't be removed after a long time, you can wet the area covered by the refrigerator for a while, and the film will be easier to tear off when wet.

2.You can also use a vacuum cleaner or electric heater to heat the whole film on the refrigerator, so that if you can't tear it off, you can make the membrane as cold as possible, and the best items in the refrigerator can also be put into the refrigerator and let it heat up slowly. 3.

When the internal temperature of the refrigerator protective film reaches a relatively high level, it can be banned with a knife, cut off the film from all sides, and it can be completely removed.

What to do if the refrigerator protective film can't be removed after a long time How to tear off the refrigerator protective film Tips.

1.If the refrigerator protective film can't be removed after a long time, you can wet the area covered by the refrigerator for a while, and the film will be easier to tear off when wet. 2.

You can also use a vacuum cleaner or electric heater to heat the whole film on the refrigerator, so that if you can't tear off the bright fruit, you can make the membrane as cold as possible, and the best items in the refrigerator can also be put into the refrigerator to let it heat up slowly. 3.When the internal temperature of the refrigerator protective film reaches a relatively high level, it can be banned with a knife, and the sensitive wheel film can be completely torn off from all sides.

Refrigerator protective film, too long aging can not be torn off, there are many methods on the Internet, and it is not ideal to try. Now I'll teach you how to get it done. A pack of alcohol wet talk towels, wipe the cracks of the protective film, and slowly tear off the protective film.

Gave my family's old fridge for many years a new look.