How to clean a newly bought refrigerator before use

1. Do not plug in the refrigerator before cleaning it.

2. Use a soft cloth dipped in water or utensils dish soap, scrub gently, and then dip it in water to wipe off the dish soap.

3. Remove the accessories in the box and clean them with water or detergent.

1. How to clean the new refrigerator?

You can directly use a rag dipped in vinegar to clean it, and you generally only need to wipe the new refrigerator from the inside out. Once the wiping is complete, you can apply glycerin to the inside of the refrigerator, the main purpose of which is to make it easier to clean in the future. However, in the process of cleaning the refrigerator, it must not be wiped with alkaline and concentrated acid cleaning solution, otherwise it will reduce the service life of the refrigerator.

2. What should I pay attention to when using a new refrigerator?

1. Placement location.

When it comes to the placement of your new refrigerator, you must be refined. Generally, we need to consider these issues: whether the surrounding can dissipate heat, whether there is power supply around, whether it can be directly grounded, and so on.

2. Read the manual carefully.

Before using a new refrigerator, be sure to read the instructions carefully. In general, the instructions that come with the refrigerator have detailed information about the refrigerator. For example, the power consumption, cooling method, and use method of the refrigerator are all recorded in special detail in the manual.

3. Electricity safety should not be forgotten.

We all know that the refrigerator must use a separate three-pin socket because the refrigerator consumes a lot of power, and only a three-prong socket can meet its needs. Also, when using your new refrigerator, never press the cords, and remember to protect the insulation of the power cords.

Just wipe it with a damp rag, the inside of the new refrigerator is clean, and wait for the refrigerator to work for 4-6 hours before putting in the food. The inner wall of the refrigerator cannot be scrubbed with dish soap, so that the insulation layer of the refrigerator will enter the water, affecting the service life of the refrigerator.

How to clean your new refrigerator:

1. Do not plug in the refrigerator before cleaning it.

2. Use a soft cloth dipped in water or dish soap.

Scrub gently, then wipe off dish soap with water.

3. Remove the accessories in the box and clean them with water or detergent.

4. Clean the refrigerator switches, lights and thermostats.

When waiting for the device, wring out a rag or sponge.

5. After the inner wall is cleaned, you can use a soft cloth to dip it in glycerin.

Wipe the inside of the refrigerator once, and it will be easier the next time you wipe it.

6. Clean and scrub the sealing strip with an alcohol-soaked cloth. If you don't have alcohol handy, scrub the seal with a 1:1 ratio of vinegar water.

7. Use a vacuum cleaner.

Or a soft brush to sort out the ventilation grille on the back side of the refrigerator, do not use a damp cloth to prevent rust.

8. After cleaning, plug in the power supply and check whether the temperature controller is set in the correct position.

First of all, open the package, as an old driver of household appliances, I advise you, no matter what brand of refrigerator you are, you must open the box and check it after you arrive at the vertical Zhaojia. The so-called "unpacking" is "opening the outer packaging of the refrigerator". Based on the differences in refrigerator, style, and structure, there will be damage, appearance bumps, and scratches during transportation.

After receiving the goods, you must conduct an on-site inspection to ensure that there are no problems before acceptance. The second unpacking inspection of the town after the refrigerator belongs to itself, and it needs to be further unpacked. After most refrigerators arrive, shock-absorbing plastics, tamper-evident strips, non-slip plastic films, etc.

will be installed in the box. These things should be removed before use, especially these protective films and tapes near the radiator holes, radiator pipes, and wiring of the refrigerator, because the refrigerator will generate heat during the refrigeration process, and if these things are not removed, hidden dangers can easily occur. Thirdly, the static storage refrigerator will generally be placed in the direction of the normal stove as much as possible during transportation, and will not be put down or transported horizontally, but the change of refrigerant in the refrigerator is inevitable.

Most newly purchased refrigerators, after being shipped to the customer's home, are told to let sit for a period of time before use. The purpose of this is to wait for the refrigerant to stand still before turning on the power. In addition, some users buy refrigerators in winter, and the temperature difference between indoor and outdoor is large, and there will be freeze stagnation.

The newly bought refrigerator should be cleaned of the smell inside the refrigerator and the dust outside before it can be used.

To clean the refrigerator, clean all the dust inside and outside the refrigerator. When cleaning, you need to pay attention to the drawers of the refrigerator and some crevices in the track, which need to be wiped clean. While wiping the refrigerator with a rag, you can also use a little alcohol or other disinfectant appropriately, which can not only remove the dust on the surface of the refrigerator, but also remove some bacteria on the refrigerator, and it will be more reassuring when using.

Cleaning the refrigerator also needs to remove the odor in the refrigerator, the refrigerator we bought home has a strange smell after opening, so we also need to remove the odor inside the refrigerator. Because some plastics or rubber used in the refrigerator may produce some peculiar smells, these peculiar smells will also cause contamination to the food placed in the refrigerator and affect the taste of the food. You can choose to put a few activated carbon in the refrigerator to remove odors, and you can also choose to open the door of the refrigerator to ventilate and disperse odors.

How to pick a refrigerator

1. Look at the capacity: The capacity of the refrigerator is not to say that the bigger the better, the larger the capacity of the refrigerator, the larger the space occupied by the refrigerator, and the power consumption is also larger. Generally, the volume of refrigerators is considered to be 40-60 liters per person, and it can be selected according to the actual number of people in the household.

2. Look at the noise: If the sound of the refrigerator is small and there is basically no obvious noise, it means that the refrigerator is thicker and has good sealing, which can ensure effective constant temperature and save electricity. At the same time, the quality of the compressor is also relatively passable.

3. Look at energy efficiency: Generally, the outside of the refrigerator will be labeled with energy-saving labels. According to the latest national standards, the energy consumption of refrigerators can be divided into five levels: 1-5, and level 1 means that the refrigerator has reached the international advanced level and is the most energy-saving.

By analogy, a level of 5 indicates the highest energy consumption.

4. Look at the freshness of the refrigeration appliance: the freezing power is an important technical indicator to measure the refrigeration appliances, but the uses of the refrigerators are different. Compared with special needs such as commercial and scientific research, the main technical performance of household refrigerators should not be refrigeration, but freshness.

5. Look at the brand: the brand specializing in the manufacture of refrigerators will be better, such as Meiling, Limb Jianhaier, etc., these brands have good product technology and product quality in the long-term market competition, and the terminal after-sales service of their brands will be correspondingly better.