What should I do if I knock on the tiles and knock the water and electricity?

If the water and electricity are broken in the process of knocking the tiles, then the water and electricity should be re-extracted and repaired. In this case, we can re-tile it.

I thought it was to calculate if you put the hydropower which I thought was to say, if you put the hydropower where I thought it was to say, if you knocked the hydropower where did you knock it out? I think that's what you say, if you knock out the hydropower somewhere? You should quickly pull the valve or the store manager, so as not to cause unnecessary, I thought that is, if you knocked the water and electricity somewhere?

You should quickly pull the valve or the store manager to avoid unnecessary losses. And then fix them like that and fix them again so you can get on with your work.

Knock off the tiles, if the water and electricity are knocked out. Then it is necessary to rearrange the water and electricity, because when knocking on the tiles, if the water and electricity are broken, then the water and electricity must be rearranged.

Hello, if the water pipe is broken, quickly manage the sluice, and let the hydropower master cut off the ruptured and re-street; Generally, the wire will not be broken, and if there is, the wire sleeve should not be a big problem.

What if the water and electricity are knocked out? Then quickly close the electric gate and water gate, and then reconnect it after you are done with water or electricity, but you must pay attention to safety.

I think it is to cut off the water and electricity first, and then find a worker to repair it, if it is exposed, dry the water in the case of power failure, so as to avoid the downstairs residents from suffering.

You can't solve this unbroken tile, because you have to cut it from the leakage of the borehole, and then stretch out the hot melter to heat and melt. And it's not a piece, how much pressure you want the water to have, and the two heads have no room for movement and can't exert it.

If the wire pipe is smashed and a new pipe is rearranged, it will be scrapped, and there is no way to fool the electricity.

It is necessary to dismantle the wall and reorganize the waterway and circuit.

1. Excavate the damaged place. 2. If it is a metal pipeline, it can be welded, and the excavation area can be smaller, and it can be welded.

It had to be renovated, electricity could go outside, water probably wouldn't. Moreover, it is dangerous to miss any of them.

Knock off the tiles, repair them and then make them back to the tiles, or if the water pipe is not pierced, you can use PPR to cut a strip and burn it with fire, and quickly plug in the leak.

Let's change it again! It will be very troublesome to knock out the original floor tiles, and it will be very troublesome to do waterproofing work after the floor tiles are knocked off, and it is necessary to brush to the junction with the wall. The re-knocked ** is more than twice as expensive as re-installing a new house, and the water and electricity pipes under the original bricks will also be affected.

The laying temperature of floor tiles should preferably be higher than 10. Before laying, the floor tiles must be placed face down on the construction site for more than 24 hours so that the temperature of the floor tiles is the same as the room temperature. The room temperature should be kept as constant as possible during the laying process.

Before laying, first draw a cross-shaped reference line on the ground, and if the floor tiles are paved diagonally, the cross line should be drawn at an angle of 45 ° with the original baseline.

If you replace the floor tiles in the bathroom as a whole, it is recommended to remove the toilet.

2.It is recommended not to use the bathroom again until the tile is firmly paved after waterproofing, mainly to avoid.

The house has been renovated and now due to the bathroom wall tiles east contact the renovation company.

Knock off and re-paste the tiles, for fear of knocking out the water and electricity inside, this worry is not necessary. Knocking on the tile will not affect the water and electricity pipes, because the water and electricity pipes are relatively deep, and the tiles are the top layer, as long as you carefully and gently knock on them, use an iron hammer.

Sag percussion drills are not available.

and other high-power mechanical equipment will not hurt random equipment and pipelines. Experienced renovation operators won't break it, it's just tinkering, not large-scale demolition and renovation, so your worries are unnecessary.

The problem is not big, since it is the decoration company to give rework and repair, then if there is a problem, the decoration company will be responsible for the end, rest assured to entrust them to the construction, and the decoration company also has a construction warranty period.

If you now have a broken bathroom tile, then you can replace it again, there is no difficulty, if the water and electricity are broken, now there is a direct connector can be connected, there is nothing to worry about.

The house has been renovated, the walls of the bathroom, the tiles are crumbling, you can contact the decoration company, let them re-paste, and then call self-esteem, you can find them to dismantle, because if you don't have special tools, only use a hammer to knock it, it is easy to break the water inside.

The house has been renovated and has a bathroom. wall tiles. Contact the renovation company.

Knock off and re-apply the tiles. I'm afraid that it will be damaged by the water and electricity inside. If this is knocked out, even the waterproofing and water and electricity inside will have to be redone.

is the safest.

In fact, there is no need to worry about this, leave the matter to the decoration company. If there is any other damage, it should be remedied or compensated by the builder.

If it is a newly renovated house, the water and electricity in the walls are generally well protected, like the wires are worn in the pipes, and the water pipes are very big tasks, if you knock on the tiles. In general, there is no damage.

No, if the water and electricity are broken, you need to replace a part of it, and you don't need to rearrange the circuits of the whole house, which is too troublesome, and it can be replaced, you can rest assured.

Knocking on bathroom tiles is very easy to damage the waterproof layer of the wall. As long as you pay attention, it has little impact on the circuit, because the outside of the wire is protected by a wire pipe.

The house has been renovated, and now due to the collapse of the tiles on the bathroom wall, contact the decoration company to knock it off and re-paste the tiles, for fear that your water and electricity will be damaged. If that's the case, then you can also ask him to come over and help re-repair it, and you don't need to knock it out again.

Just come to decorate the house, you have to tell him about where to go now, let him be loud and comfortable, generally no problem, generally have to have a threading pipe, as long as he hits gently, generally will not hit the wall pipe, so tell him about the scene. Or for the insurance period.

If you help others in time, he will knock it off gently, and it should not have a particularly big impact on the pipe fittings inside. But it does need to be repaired.

If your water and electricity are also made by the renovation company, then he knows where it is, and he will definitely be careful not to break the inside.

Because now your house has been renovated, now because the bathroom wall tiles next to the contact decoration company to knock out the re-tiles, and afraid of the water and electricity inside knocking down, you can now hire a skilled person when decorating.

The child has been renovated, and now due to the collapse of the wall tiles in the bathroom, contact the decoration company to knock out and re-paste the tiles, so who should pay for this cost? You have to think about this question carefully.

The problem is so stupid, just change the tile and say as if the house is going to be demolished.

The old tiles should all be knocked out and the new tiles should be pasted. 2 comparisons + the labor cost of cleaning the old tiles. It's worth it, there will be no sequelae.

1. Excavate the damaged place.

2. If it is a metal pipeline, it can be welded, the excavation area can be smaller, and it can be welded (the hole diameter is about 30). If it is an aluminum-plastic material, the excavation area is large, and this section can be replaced. However, the amount of excavation is large and the process is complex.

After checking and confirming that there is no leakage with leakage liquid, the damaged part is cut off, repaired with high-grade mortar masonry, and the wall is knocked on a certain working surface by adding joints.

First of all, you must turn off the main switch of the water pipe at home, otherwise it will be troublesome if the water leaks to someone else's house. Knock the tiles, find the broken place, the PPR pipe is hot melted with a hot melt gun, if it is an iron water pipe, go to the hardware plumbing store to buy a quick catch of the same caliber, check to make sure that there is no leakage, and repair it with high-grade mortar masonry.

Knock on a certain working surface of the wall, cut off the damaged part, add joints to connect, check and confirm that there is no water leakage, and repair it with high-grade mortar masonry.

It's a bit of a hassle to do it yourself, so it's best to ask someone who understands to help.

Hurry up and turn off the water meter first, and then go to change the water pipe.

Knock off the tiles, repair them and make them back again.

Otherwise, if the water pipe is not pierced, a small hole can be smashed, and you can use PPR to cut a strip and burn it with fire to quickly plug in the leak.

Some of the tiles on the bathroom wall are off porcelain, contact the decoration company to promise to knock off the tiles and re-paste, for fear of knocking down the water and electricity inside, you don't have to worry about this situation, because the water and electricity are walking in the wall, you can't knock him if you knock on the tiles, and this kind of thing is responsible for the decoration company, you don't have to worry about it.

Hello, the tile of this bathroom is likely to fall off because the old engineering waterproof layer of the bathroom has not been removed, that is, the original waterproof layer of the developer has not been played, and it can be redone, as for the problem of water and electricity, it is actually very simple, the decoration company will take pictures and archive after the water and electricity cloth, so that they should be careful when they hit the location of water and electricity, and generally will not get the water pipe.

If the house has been renovated, and some of the tiles on the wall of the bathroom have fallen off, then the decoration company should be responsible for the maintenance for you, what kind of way he uses when repairing, as long as he can repair it, there is no big doubt about this.

It is estimated that the glazed tiles are pasted, and the gap reserved when the tiles are pasted is too small, so the glaze is squeezed out.

If the line pipe inside is a diffuse bend at the bend, it can be worn through, and it cannot be worn at a right angle. Water pipes can be hot-melted at any time and anywhere.

In this case, it is not a tile that will be replaced if the glaze is dropped, but a tile should be selected and all the original will be shoveled to re-stick, so as to ensure that the porcelain surface will not be dropped in the future, and the original hydropower facilities will be repaired if they are damaged.

FYI.

There is also a cement mortar for tiling, and there is a mortar leveling behind it, and knocking on the tile only knocks on the outside of the tile mortar, so it is impossible to knock out the water and electricity pipes, right.

It doesn't matter, because the decoration company knows the line and water line, so they will avoid it when they knock on the brick, and it won't hurt the line inside, so you can rest assured.

Your worries are unwarranted. None of the water and electricity lines are buried particularly shallow. Generally, the width of the pipe slotting is consistent with the diameter of the embedded pipe, and the depth is flat with the original blank wall, and the top of the blank wall is plastered and glued to the tile.

In this case, you need to communicate with the property, and then follow the method given by the property to solve it. But under normal circumstances, when decorating in the bathroom, you must first turn off the main water pipes and so on.

The house has been renovated, and now the wall tiles of the bathroom are partially hanging, and the renovation company was contacted, because this itself belongs to their operation error, so they must remedy this aspect of the matter.

A professional master will not knock out the water and electricity inside.

There is a specialization in the art industry, no problem, as a landlord, you can supervise the work next to you.

The house has been renovated, and now the bathroom wall has to be re-tiled, but it is small and afraid that it will knock down the water and electricity lines, which is indeed a technical job, and find professionals to do it.

Under normal circumstances, I think that if the house has been renovated, and now the wall part has been put on the line, and Sichuan has fallen, I think it is necessary to understand from three aspects.

This is generally not going to be that easy.

In fact, the tiles are very simple.

It's just that you need to pay attention to it yourself.

Part of your bathroom tiles off porcelain, to knock off the tiles and re-paste, the decoration company said it's okay, knock down the water and electricity doesn't matter, you can reinstall, of course, anyway, the decoration company is not afraid of big things, the more life the better, if this is the case, you can knock off all the bathroom tiles, re-tile and reinstall water and electricity, all redecorate.

Some of the bathroom tiles in your house have to be knocked off. Re-paste the decoration company, saying that it might as well knock out the water and electricity, it doesn't matter, you can redecorate, of course, if that's the case, you can knock out all the bathrooms and redecorate.

Our home is part of the bathroom tile hanging layer to knock off the layer and re-paste, the innovation company said that no sun protection switched, water and electricity can be reinstalled, then I think they should be able to guarantee that it is okay, no problem.

The wires are in the middle of the wall, in the pipes, just the sockets are on the outside. Wealthy people can redecorate. For example, you can replace the porcelain tiles that you are not familiar with. Find a small job and try it.

In the construction process of general tile renovation, it is rare to be damaged because the trunking is pre-buried.

Our home is part of the bathroom tiles, the tune to knock out the re-paste of the tune, the decoration company said that it doesn't matter if the water and electricity are knocked out in a bad way, you can reinstall, this is of course a coincidence of water and electricity reinstallation, you spend money, so don't waste money? Still be careful with the small.

No, the original wall is made of 300 mm waterproof, and the wall tiles are generally not knocked on when the urinal is replaced.

Materials and tools required to repair tiles: replacement tiles (the same size and color as the original tiles), tile adhesives, tile caulk, hammers, chisels, rubber scrapers, sponges, spatulas.

Steps: 1. Use a hammer and chisel to knock off the damaged tiles and the original tile adhesive until the original cement wall is exposed.

2. Adjust the tile adhesive (generally the powdered adhesive must be prepared with water, please refer to the adhesive packaging instructions for the ratio, usually the adhesive: water = 4:1).

4. After the adhesive is applied to the tile, you can scrape the sawtooth marks on the surface of the adhesive to increase the adhesion of the tile, and then paste the tile to the wall.

5. In order to make the tile evenly fit the wall, after pasting the tile, use the wooden handle of the hammer to tap the tile.

6. Use a rubber scraper to scrape off excess tile adhesive.

7. After the tile is pasted, it will take 8 hours before it can be caulked. When caulking, use a soft rubber scraper to fill the gap around the tile by following the direction of the tile.

8. Before the caulk is dry, you can use a wet sponge to remove the excess caulk.