Floor drain node of plastic wood flooring, how to maintain plastic wood flooring Cleaning and mainte

1. Soda and vinegar dredging method: first pour half a cup of cooked baking soda powder into the sewer, and then pour half a cup of vinegar, and the soda can remove the oil and fat substances adhered to the pipe after the reaction between the soda and the acid in the vinegar.

2. Log dredging method: first insert a log with a diameter close to the drainage outlet into the water pipe, and put a certain amount of water in the pool, and quickly pump the log up and down without interruption, and the dirt in the pipeline will be washed away under the action of suction and pressure.

3. Pump dredging method: When the drain sewer is blocked, the hose of the pump can be plugged into the sewer, and then a small amount of water can be put in, and the pipe can be dredged.

4. Caustic soda dredging method: the sewer pipe is blocked, you can buy a few pieces of caustic soda from the market, put it in the sewer pipe, and then pour some hot water. When caustic soda meets hot water, caustic soda encounters hot water, chemical changes occur, the temperature rises rapidly, and the oil scale in the pipeline dissolves and discharges along the water, thus solving the problem of sewer blockage.

5. Dredging agent: supermarkets sell "pipes" (liquids, bottles), specially clean up this kind of pipeline blockage, pour an appropriate amount according to the degree of blockage, and pay attention to the instructions before buying, because some varieties of pipes are for metal pipes, and plastic ones cannot be used.

It is necessary to design a specific construction plan according to the specific floor plan, and specific cases can be provided to solve the problem.

1.Use soap, hot water, and a stiff bristle brush to remove dirt and residue. After the WPC decking is installed, the dirt and debris are cleaned in this way.

2.Use alcohol or acetone to gently wipe the imprint on the side of the WPC flooring.

3.Use a regular floor cleaner or cleaner that contains bleach (sodium hypochlorite) and detergent.

4.If there is grease on the floor, remove it immediately with a household degreaser and rinse it with hot water.

5.Wash the area with the chalk imprint with hot, soapy water and bleach. Colored chalk marks are stubborn and cannot be removed, so consider using white chalk or talcum powder on the floor.

6.Melt ice and calcium chloride or stone salt on the floor, which most home product care stores have, such as homedepot. When the ice starts to melt, rinse it off.

7.Remove ink stains with hot, soapy water and wash thoroughly.

8.Use cleaning products containing oxalic acid or phosphate to remove dirt and rust from the floor. This will lighten the smudge and it will also be possible to remove it.

9.Use common rust cleaners to remove pigmentation contamination from weathering floors.

10. According to the instructions on the bleach package, mix the bleach into hot water to clean wine stains and fruit stains. Gently wipe the stain and rinse with hot water.

The maintenance and cleaning tips of solid wood flooring are very simple and practical, and you can learn to use the floor for several more years.

According to the drawings required by Party A.

The plastic wood flooring is relatively brittle, and the unloading and handling should be bumpy.

According to the installation location, function and load-bearing factors.

The spacing of the keel can not be too large, which is easy to cause the floor to bend, and the keel can choose galvanized steel (using drill tail screws, galvanized, etc.) pipes.

plastic wood keel (using self-tapping) and so on.

The selection of the screws of the card should not be too short.

When punching in the screws, do not sink too much, which is easy to cause damage to the card parts, and has been specializing in the construction of plastic wood products for many years, and can undertake large and small plastic wood construction projects

There is no requirement for this. It is recommended that the landlord use barefoot plastic wood flooring, I use this brand of plastic wood flooring, which is super easy to use.

The ground needs to be flat and has certain hardness requirements. It is recommended to make a cement floor with square dirt for ventilation and water permeability.

If there are some special stains on the plastic wood flooring, you can directly use a special stain remover oil to clean it. When cleaning the WPC flooring, do not let sandpaper, grinders or metal tools be hard to clean the WPC flooring. When cleaning, first use a rag dipped in rice water to wipe directly, and also spray the rice washing water evenly on the wooden floor, and then stay for 5 to 10 minutes, wipe it with a dry rag, and the plastic wood floor will become much cleaner.

1. Use plastic wood sheet for edge banding: this kind of edge banding is relatively monotonous, and it has high requirements for the flatness of plastic wood flooring, otherwise the uneven edge banding and floor gap will be ugly; In addition, where there are many arcs, it is easier to install WPC thin boards.

2. Use plastic wood right angle for edge banding: This kind of edge banding should be the most widely used edge banding material at present, because the paving effect is good. Here, it is recommended to use the right angle of plastic wood with a thick wall thickness for edge banding, and use self-tapping screws to fix the pilot hole when installing, and it is not suitable to use gun nails.

3. Use metal right-angle edge banding for edge banding: There is no doubt that the cost of this kind of edge banding is the highest, but this kind of edge banding is indeed the most durable, and the texture of metal can highlight the high-end atmosphere of plastic wood flooring.

After self-leveling air drying, lay the plastic wood flooring.

4. The installation method is relatively simple. If the requirements are high, it depends on what kind of foundation the ground is, and if you want to pave the effect well:

1.Use a level to level the ground, cement or something else.

2. You can do a self-leveling 3

1. Be optimistic about the direction of floor laying 2

A special layer of styrofoam is placed between the floor and the floor to cushion and reduce the sound. 3. From one side to the other side, the door should also pass through, (unless there is an exception for the threshold) 4. Leave gaps on all sides of the wall, and the size of the gaps should be used to ensure that the baseboard is not exposed (left as a surging coefficient), and the springs are stuck on the springs. 5

Note that the yin and yang water must be stuck (convex and concave).

The middle is not allowed to be concave and concave to be connected. 6

Hit the floor with a short head floor and a hammer to keep them close together. (Preferably a rubber hammer or wooden hammer)7

The entrance and the bathroom door and the place where the floor and the cement floor meet should be bought to seal the edge to prevent the floor from prying. The above hopes to help you *** look at this version of the top sticker, there is already a good way. --

The main components of WPC flooring are wood powder and PVC, which is a new type of environmentally friendly material that is cut by water-cooling forming after high temperature extrusion. , waterproof and fireproof performance is very good. WPC decking has indoor flooring and outdoor flooring.

The difference is that most of the plastic on the indoor floor is made of polyvinyl chloride, and some are also foamed; Polyethylene is used for exterior flooring. The wood flour content is generally more than 50%. It is an energy-saving and environmentally friendly product.