Is there a rule that the toilet sewer pipe is not allowed to be completely enclosed in the tiles?

Updated on home 2024-07-03
13 answers
  1. Anonymous users2024-02-12

    There is no provision that the sewer pipe is not allowed to be completely enclosed in the tile, anyway, the sewer pipe in our home is not allowed to be completely enclosed in the tile, anyway, the sewer pipe in our home is enclosed in the tile, but it may be more troublesome if there is any problem.

  2. Anonymous users2024-02-11

    Although there are no regulations, if there is a problem with the sewer pipe in the bathroom, it is very troublesome to repair and destroy the closed tile. Therefore, before closing, be sure to choose a good sewer pipe, mainly to prevent leakage, if it is fouled, you can dredge it directly without damaging the tiles. But as soon as there is a leak, the tiles must be destroyed.

    Therefore, when closing the sewer line, we must take leak-proof measures.

  3. Anonymous users2024-02-10

    Is there a rule for bathroom sewer pipes that are not allowed to be completely enclosed inside the tiles? At present, there is no specific regulation, the bathroom sewer pipe is not allowed to be closed on the tile, but it should be placed in the homestay, to be repaired, once leaked, it may be very troublesome.

  4. Anonymous users2024-02-09

    No, but it's better not to be fully enclosed to avoid trouble with repairs later.

  5. Anonymous users2024-02-08

    There is currently no rule that toilet sewer pipes are not allowed to be completely enclosed inside tiles.

  6. Anonymous users2024-02-07

    What are the national regulations for laying tiles in the toilet sewer of the bathroom? There are no rules, so you decorate your own bathroom, a only your own decoration, you compare the decoration on the good maintenance point, the general can not be made into a political meeting, will really go to the bathroom with you, you single to change this left side of the sa, very troublesome, so there are generally no regulations, so generally speaking, you yourself in general for the convenience of maintenance, so it is better to let him separate.

  7. Anonymous users2024-02-06

    This is not clearly specified, and the bathrooms are all modified without permission. If you want to change it to**, change it there, and if you want to put the sewer on the bright side, no one will say yours.

  8. Anonymous users2024-02-05

    There are no regulations for this, but it is necessary to ensure that the drainage is smooth and that maintenance is easy.

  9. Anonymous users2024-02-04

    I haven't heard of it, but based on my decades of experience, the sewer pipes in the bathroom are all under the floor tiles.

  10. Anonymous users2024-02-03

    Sewer mains are not allowed to be fully concealed. The main sewer riser of the bathroom, generally each floor will be provided with an access opening, in the home decoration and decoration of the use of ceramic tiles or other materials for the construction of the package, the access to the drainage riser can not be closed, is not conducive to the future maintenance of the eggplant. Article 5 2 6 1 of the national standard "Code for Acceptance of Construction Quality of Building Water Supply and Drainage and Heating Engineering GB50242-2002" is as follows:

    Inspection openings should be provided at intervals on the riser, but must be set at the lowest level and at the top level with sanitary appliances. If it is a two-story building, only the riser inspection port can be set on the ground floor; When there is a B-shaped elbow, the spine collapses on the upper part of the B-shaped bend in this layer and a checkpoint is arranged. The height of the center of the inspection port is generally 1m from the operating ground, and the allowable deviation is 20mm; The orientation of the inspection port should be convenient for accessing Sakura-en.

    Concealed risers, access doors should be installed at the inspection openings.

  11. Anonymous users2024-02-02

    Sewer mains are not allowed to be fully concealed.

    The main sewer riser of the bathroom, generally each floor will be set up with an access port, when the home decoration is carried out with ceramic tiles or other materials for the construction of the pipe, the access to the drainage riser can not be closed, which is not conducive to future maintenance. Article 5 2 6 1 of the national standard "Code for Acceptance of Construction Quality of Building Water Supply, Drainage and Heating Engineering GB50242-2002" stipulates as follows: an inspection port should be set up every other layer on the riser, but it must be set at the lowest level and the highest layer with sanitary appliances.

    If it is a two-story building, only the riser inspection port can be set on the ground floor; If there is a B-shaped bend, an inspection port is arranged on the upper part of the B-shaped bend in this layer. The height of the center of the inspection port is generally 1m from the operating ground, and the allowable deviation is 20mm; The orientation of the inspection port should be easy to access. Concealed risers, access doors should be installed at the inspection openings.

  12. Anonymous users2024-02-01

    There is no rule but there is a manhole.

  13. Anonymous users2024-01-31

    No, but it's good to stay active at the elbow, not afraid of 10,000, just in case.

Related questions
Who is responsible for leaking sewer pipes in the bathroom
10 answers2024-07-03

Legal Analysis]: According to different reasons, the responsibilities are different: 1. If the main water pipe of the bathroom leaks due to the decoration of the house, then it is the responsibility of the decoration company or the owner himself. >>>More

What should I do if the bathroom at home is bulging on four walls due to water seepage from the main
6 answers2024-07-03

First of all, the restroomGet into the waterThe water seepage of the pipes causes problems with the tiles, and the sewer pipes in the toilet are all normally on the floor, and the sewer pipes are very rarely on the wallsIn addition to special circumstances, such as the toilet and washbasin of the wall row, the problem of the wall drain sewer pipe is actually not difficult to repair, because the sewer pipe is all able to accurately determine the location, the destruction of a few wall tiles can also be carried out maintenance, this maintenance even the tiles do not need to be destroyed, of course, the master also needs to use his brains when repairing. >>>More

What should I pay attention to when installing the sewer pipe in the bathroom on the first floor?
9 answers2024-07-03

What problems should be paid attention to when installing the toilet sewer pipe?

Whether the bathroom is waterproofed first or covered with sewer pipes first
16 answers2024-07-03

1. Bathroom waterproof construction steps.

Step 1: You can use slightly coarser cement as a primer first, and wait for the cement to dry before brushing the waterproof coating. But in painting money, the ground should be flat and there should be no grooves. Water is then sprinkled on the ground to expel the gas from the small holes. >>>More

Can the bathroom and kitchen share a sewer pipe? Why?
10 answers2024-07-03

Under normal circumstances, the bathroom and the kitchen cannot share a sewer pipe, because the water discharged from the bathroom belongs to boiling water, and the smell is relatively pungent, it will be easy to have nausea, if the bathroom and the kitchen share a sewer pipe, it will be easy to block. Under normal circumstances, the water in the kitchen is relatively clean, and it can be reused after treatment, so in the process of decoration, it is best not to choose to combine the kitchen sewer pipe with the bathroom sewer pipe. And this situation is also not in accordance with the regulations, the sewage in the bathroom needs to be discharged into the septic tank, and the wastewater in the kitchen needs to be discharged into the grease trap. >>>More